Transcript
Installation Manual Quidway S2008/S2016 Ethernet Switches Table of Contents i Table of Contents Chapter 1 Overview.......................................................................................................................1-1 1.1 Brief Introduction................................................................................................................1-1 1.2 Typical Application of S2008/S2016..................................................................................1-1 1.2.1 Application in Broadband Residential Area with Ethernet Access..........................1-2 1.2.2 Application in Large Enterprise and Campus..........................................................1-2 Chapter 2 System Specifications.................................................................................................2-1 2.1 S2008 Switch.....................................................................................................................2-1 2.1.1 Appearance.............................................................................................................2-1 2.1.2 Front Panel..............................................................................................................2-1 2.1.3 Chassis Cover.........................................................................................................2-2 2.1.4 Rear Panel..............................................................................................................2-4 2.2 S2016 Switch.....................................................................................................................2-4 2.2.1 Appearance.............................................................................................................2-4 2.2.2 Front Panel..............................................................................................................2-4 2.2.3 Chassis Cover.........................................................................................................2-6 2.2.4 Rear Panel..............................................................................................................2-7 2.3 System Description of S2008 and S2016 Switches..........................................................2-7 Chapter 3 Preparation for Installation.........................................................................................3-1 3.1 Safety Precautions.............................................................................................................3-1 3.2 Checking the Installation Site............................................................................................3-1 3.2.1 Temperature/Humidity Requirements.....................................................................3-2 3.2.2 Cleanness Requirements........................................................................................3-2 3.2.3 Anti-interference Requirements..............................................................................3-3 3.2.4 Laser Radiation Avoidance.....................................................................................3-3 3.3 Installation Tools and Devices...........................................................................................3-3 Chapter 4 Installation....................................................................................................................4-1 4.1 Hardware Installation.........................................................................................................4-1 4.1.1 Mounting the Switch in a Cabinet...........................................................................4-1 4.1.2 Mounting the Switch on a Workbench....................................................................4-2 4.1.3 Wall-Mounting the Switch in a Building...................................................................4-2 4.2 Power Cord and Ground Wire Connection........................................................................4-2 4.2.1 AC Power Cord.......................................................................................................4-2 4.2.2 DC Power Cord.......................................................................................................4-4 4.2.3 Ground Wire............................................................................................................4-4 4.3 Console Cable Connection................................................................................................4-5 4.4 Optional Interface Modules Installation.............................................................................4-7 Installation Manual Quidway S2008/S2016 Ethernet Switches Table of Contents ii 4.5 Post-installation Checklist..................................................................................................4-7 Chapter 5 Booting and Configuration.........................................................................................5-1 5.1 Setting up Configuration Environment...............................................................................5-1 5.2 Connecting the Console Cable..........................................................................................5-1 5.3 Setting Parameters of the Terminal...................................................................................5-1 5.4 Booting S2008/S2016........................................................................................................5-5 5.4.1 Checking before Powering on the Switch...............................................................5-5 5.4.2 Powering on the Switch...........................................................................................5-6 Chapter 6 BootROM and Host Software Loading......................................................................6-1 6.1 Introduction to Loading Approaches..................................................................................6-1 6.2 Local Software Loading.....................................................................................................6-1 6.2.1 Boot Menu...............................................................................................................6-2 6.2.2 Loading Software from Console Port Using XModem............................................6-3 6.2.3 Loading Software from Ethernet Port Using TFTP.................................................6-8 6.2.4 Loading Software from Ethernet Port Using FTP....................................................6-9 6.3 Remote Software Loading...............................................................................................6-11 6.3.1 Remote Loading Using FTP..................................................................................6-11 6.3.2 Remote Loading Using TFTP................................................................................6-12 6.4 Dealing with Load Failure................................................................................................6-12 6.5 Dealing with Missing of Password...................................................................................6-13 Chapter 7 Troubleshooting..........................................................................................................7-1 7.1 Power System Failure........................................................................................................7-1 7.2 Configuration System Failure............................................................................................7-1 Chapter 8 Optional Interface Modules.........................................................................................8-1 8.1 Types of Optional Interface Modules.................................................................................8-1 8.2 Installation of the Optional Modules...................................................................................8-1 8.3 100Base-FX Single-mode/Multi-mode Modules................................................................8-2 8.3.1 Introduction to the Modules.....................................................................................8-2 8.3.2 Module Appearance................................................................................................8-3 8.3.3 Module Panel and the Indicators.............................................................................8-3 8.3.4 Interface Fiber of the Module..................................................................................8-4 Installation Manual Quidway S2008/S2016 Ethernet Switches Chapter 1 Overview 1-1 Chapter 1 Overview 1.1 Brief Introduction Quidway S2008/S2016 Ethernet Switches, a box shape Layer 2 Ethernet Switch independently developed by Huawei Technologies Co., Ltd. (hereafter referred to as Huawei), has high performance, large port density and easy installation method. S2008/S2016 provide 8/16 10/100M auto-sensing Ethernet ports, one fixed 100Base-TX uplink port (which provides one 100Base-TX MDIX and 1 100Base-TX MDI user interfaces), one extended slot for 100M optical interface module. The following modules are optional for the extended slot. 100Base-FX multi-mode module 100Base-FX single-mode module. According to different power supplies, S2008/S2016 Ethernet Switches are equipped with two kinds of chassis, i.e. DC chassis and AC chassis, which have dissimilar power input sockets. S2008/S2016 support the convenient network management. When networking in the residential areas providing broadband access, S2008/S2016 can coordinate with the management device through HGMP, implementing fast and convenient broadband access service. Note: HGMP (Huawei Group Management Protocol) is a proprietary Layer 2 protocol developed by Huawei. HGMP V2 implements group management over Quidway S Series Switches. With HGMP V2, members can be configured, added and removed, and the link topology can be copied. 1.2 Typical Application of S2008/S2016 The networking of S2008/S2016 Switch is very flexible. S2008/S2016 can be applied for enterprise networking and broadband accessing. Some typical networking modes are described in the following sections. Installation Manual Quidway S2008/S2016 Ethernet Switches Chapter 1 Overview 1-2 1.2.1 Application in Broadband Residential Area with Ethernet Access In the networking environment of accessing the Internet with the broadband in residential areas, S2008/S2016 are located in-building. 10/100M10/100MCommercial network withbroadband accessS8016S8016S8016S8016GEResidential area withbroadband accessCenter of theareaFEFEFEIn-building switchS2008/S201610/100M10/100M10/100M10/100MBuildingS2008/S2016S2008/S2016S3526S3026 Figure 1-1 Application in Broadband Residential Area with Ethernet Access 1.2.2 Application in Large Enterprise and Campus On the large enterprise and campus network, S2008/S2016 are located on the accessing layer. It is connected to the Layer 2 switch or convergence layer switch (Layer 3 switch) via uplink, and thus connected to the Gigabit switch on the backbone network. In this way, it provides the solution to access the backbone network at the speed of gigabit per second and connect the desktop at 100Mbps for the whole enterprise networking.
