Transcript
NOMENCLATURE 1.
Aquaparks, public swimming pools, spa pools, hotel and rehabilitation pools
1.1
Structural design of pools
1.1.1 1.1.1.1 1.1.1.2 1.1.1.3
Ceilings Movable ceilings Assembled ceilings (foils) Roofing
1.1.2 1.1.2.1 1.1.2.2 1.1.2.3 1.1.2.4 1.1.2.5
Walls Decorative mosaic (ceramics, glass) Decorative designs of walls Adhesives for facing materials Foils Ceramic tiles
1.1.3 1.1.3.1 1.1.3.2 1.1.3.3 1.1.3.4 1.1.3.5
Floor areas Anti-skidding system Adhesives for facing materials Ceramic floor tiles Laminated floors Floors made of natural stone
1.1.4
Windows, doors
1.1.5 1.1.5.1
Pool equipment for leisure time Water attractions (toboggans, chutes, spacebowls, water effects) 1.1.5.2 Diving towers, diving platforms 1.1.5.3 Stairs and staircases 1.1.5.4 Floor water jets, spouts 1.1.5.5 Wave generators 1.1.5.6 Systems for swimming in a swift current 1.1.5.7 Railing 1.1.5.8 Partition walls of shower enclosures 1.1.5.9 Natural rock imitation 1.1.5.10 Cloakrooms, cabins 1.1.5.11 Underwater systems (windows, loudspeakers, illumination) 1.1.5.12 Camera supervision systems 1.2
Pool construction
1.2.1 1.2.1.1 1.2.1.2 1.2.1.3
Structure Prefabricated constructions Indoor pools Inflatable buildings
1.2.2 1.2.2.1 1.2.2.2 1.2.2.3 1.2.2.4 1.2.2.5 1.2.2.6 1.2.2.7 1.2.2.8 1.2.2.9 1.2.2.10 1.2.2.11 1.2.2.12 1.2.2.13 1.2.2.14 1.2.2.15 1.2.2.16
Swimming pools Shut-off grille systems, movable grille systems Assembled pools Lining of pools Circumferential stone systems for swimming pools Repairs of swimming pools Folding swimming pools Swimming pools made of stainless steel Modular pool systems Rising floors Rising walls Swimming pools made of insulation brick Bathroom systems for water treatment Plastic pools Concrete pools Overfall channels Water pipeline
1.3
Swimming pool technology
1.3.1 1.3.1.1 1.3.1.2 1.3.1.3 1.3.1.4 1.3.1.5 1.3.1.6 1.3.1.7 1.3.1.8 1.3.1.9 1.3.1.10 1.3.1.11 1.3.1.12 1.3.1.13 1.3.1.14 1.3.1.15
Heating, ventilation, water heaters, energy savings Fittings and accessories Floor heating Heating equipment Boilers and storage water heaters Radiators and heating elements Radiators, air conditioning systems and equipment Air handling technology Fans Measuring and regulation systems, equipment Pumps Swimming pool covers Solar technology Thermal pumps Heat recuperation systems Heat exchangers
1.3.2 1.3.2.1 1.3.2.2 1.3.2.3 1.3.2.4 1.3.2.5 1.3.2.6
Sanitary technology Fixtures and fittings, accessories Showers Feet disinfection systems Protection from corrosion Measuring and regulation systems, equipment Tubs
1.3.3 1.3.3.1 1.3.3.2 1.3.3.3 1.3.3.4 1.3.3.5 1.3.3.6 1.3.3.7 1.3.3.8 1.3.3.9 1.3.3.10 1.3.3.11 1.3.3.12 1.3.3.13 1.3.3.14 1.3.3.15 1.3.3.16 1.3.3.17 1.3.3.18 1.3.3.19 1.3.3.20 1.3.3.21 1.3.3.22 1.3.3.23 1.3.3.24 1.3.3.25 1.3.3.26 1.3.3.27 1.3.3.28 1.3.3.29 1.3.3.30
Water treatment Algae control means Accessories Industrial water treatment Chemical means for water treatment Chlorination systems Systems for chlorination and electrolysis Gaseous chlorine dispensing equipment Dispensing systems Dispensing systems for powder active charcoal Dispensing pumps Demineralisation, water softening, decalcifying systems Sterilisation systems, equipment Filters, filtration systems, filter cleaning Filter materials Flocculation agents Gaseous warning systems for chlorine Gaseous warning systems for ozone Carbon dioxide dispensing system Protection from corrosion Membrane filters Equipment for measuring and regulation systems Ozone systems pH value regulators Pumps Oxidation-reduction systems Water treatment systems installed on the bottom Winterisation agents Reverse osmosis systems UV systems Equipment for water analysis
1.3.4 1.3.4.1 1.3.4.2 1.3.4.3 1.3.4.4
Electrotechnical systems Illumination systems Systems for measuring and regulation Transformers Central control technologies
2.2.3.2 2.2.3.3 2.2.3.4
Acrylic pools Polypropylene pools Foil pools
2.3.
Bathing garden lakes
2.4
Technologies of private pools
2.4.1 2.4.2 2.4.3 2.4.4 2.4.5 2.4.6 2.4.7 2.4.8 2.4.9
Filtration systems, filter cleaning Skimmers Overflow channels Water stream systems, massage jets Illumination systems Heating systems Measuring and regulation systems, equipment Pumps Others
2.5
Water treatment
2.5.1 2.5.2 2.5.3 2.5.4 2.5.5 2.5.6 2.5.7
Dispensing systems Chlorinating systems Chemical preparations for water treatment Algae control means UV systems, ozone systems Water pH value and chlorine concentration testers Others
2.6
Complementary accessories
Furniture and equipment Bathroom mattresses Bath shoes Seats Garden furniture Benches Solar terraces Plants (natural/artificial) Parasols, canopies Special illumination Overhangs
2.6.1 2.6.2 2.6.3 2.6.4 2.6.5 2.6.6 2.6.7 2.6.8 2.6.9
Water surface covers Thermometers Bottom impurity vacuum cleaners Surface level impurity nettings Geotextile pads Garden furniture Funny accessories Deckchairs, parasols Others
2.7
Roofing of private pools
1.4.5 1.4.5.1
Accessories Other accessories
2.7.1 2.7.2 2.7.3 2.7.4
Segment roofing Lamella roofing Foil roofing Canvas roofing
2.
Private pools
2.1
Pools for surface assembly
3.
Saunas
2.1.1 2.1.2 2.1.3
Folding pools Pools with an inflatable ring Inflatable pools
3.1
Equipment for sauna applications
2.2
Embedded outdoor pools
2.2.1 2.2.1.1 2.2.1.2 2.2.1.3
Metal pools Steel pools Aluminium pools Stainless-steel pools
3.1.1 3.1.2 3.1.3 3.1.4 3.1.5 3.1.6 3.1.7 3.1.8
Steam and herb saunas Finnish saunas Earth saunas Turkish, Roman thermal spa Rasul baths and saunas Sauna log cabins Infrared cabins Hot baths
2.2.2 2.2.2.1 2.2.2.2 2.2.2.3
Concrete pools Monolithic pools Prefabricated Pools Pools made of sprayed concrete
3.2
Sauna technologies
2.2.3 2.2.3.1
Plastic pools Laminated pools
3.2.1 3.2.1.1 3.2.1.2 3.2.1.3 3.2.1.4
Heating, ventilation, water heaters, energy savings Fittings and accessories Radiators and heating elements Radiators, air conditioning systems and equipment Air dryers
1.3.5 1.3.5.1 1.3.5.2 1.3.5.3
Construction physics Sealing materials Systems for vapour separation Expansion joints
1.4
Outfitting and complementary equipment
1.4.1 1.4.1.1 1.4.1.2 1.4.1.3 1.4.1.4 1.4.1.5 1.4.1.6 1.4.1.7 1.4.1.8
Cash and box office systems Automatic box offices Turnstile systems Tickets Various coin automatic systems, coin sorting equipment Ticketing machines, ticket checking machines Box office equipment Cloakroom lockable lockers Token machines
1.4.2 1.4.2.1 1.4.2.2 1.4.2.3 1.4.2.4 1.4.2.5 1.4.2.6
Equipment Waste baskets Barometers, thermometers, hygrometers Hair dryers, hand dryers Music background systems Separation ropes Water sports goals
1.4.3 1.4.3.1 1.4.3.2 1.4.3.3
Diving equipment Diving boards Dive towers Starting blocks
1.4.4 1.4.4.1 1.4.4.2 1.4.4.3 1.4.4.4 1.4.4.5 1.4.4.6 1.4.4.7 1.4.4.8 1.4.4.9 1.4.4.10
5.2.3 5.2.4
Solar cosmetics Others
6.
Wellness
6.1
Care for body and hygiene
6.1.1 6.1.2 6.1.3 6.1.4 6.1.5 6.1.6 6.1.7 6.1.8 6.1.9
Preparations for dry body skin treatment Regeneration preparations against striae Regeneration preparations against cellulitis Deodorants Preparations protecting from sunshine Self-sunbathing preparations Hair preparations Massage preparations Others
6.2
Care for complexion
6.2.1 6.2.2 6.2.3 6.2.4 6.2.5
Complexion cleaning preparations Preparations for dry and dehydrated complexion Preparations against complexion aging Make-up Others
Massage pools and whirlpools
6.3
Intellectual and psychical comfort
4.1
Private massage pools
4.1.1 4.1.2 4.1.3 4.1.4
Meditation and relaxation music Video Acoustic and illumination technology Acupuncture, acupressure Automassages Others
4.1.5 4.1.6
Portable acrylate massage pools in wooden or other lining Monolithic plastic and other portable massage pools Acrylate massage pools for embedding Stainless-steel, plastic, ceramic and other whirlpools for embedding All-wooden hot tubs Parts and technologies for massage pools
6.3.1 6.3.2 6.3.3 6.3.4 6.3.5 6.3.6 6.4
Nutrition supplements
4.2
Commercial whirlpools
4.2.1 4.2.2 4.2.3
Acrylate whirlpools with an overfall system for embedding Stainless-steel, plastic, ceramic and other whirlpools with an overfall system for embedding Parts and technologies for whirlpools
6.4.1 6.4.2 6.4.3 6.4.4 6.4.5 6.4.6
Ion and energy drinks Vitamins, immunity enhancement, supplements Saccharide voluminous and regeneration products Joint nutrition products Special supplements for fat reduction Others
4.3
Massage pools with counter flows
7.
Fitness
4.4
Accessories
7.1
Equipment and machines for fitness
4.4.1 4.4.2 4.4.3
Chemical preparations and technologies for water maintenance Wooden complementary accessories Others
5.
Solariums
7.1.1 7.1.2 7.1.3 7.1.4 7.1.5
Fitness training machines, benches Stationary exercise bicycles, spinning Simulators, steppers Wall bars Others
5.1
Equipment for sunbathing
7.2
Accessories and equipment for fitness
5.1.1 5.1.2 5.1.3 5.1.4 5.1.5
Horizontal solariums Vertical solariums Turbo solariums Bio solariums Sunbathing deckchairs
5.2
Accessories
5.2.1 5.2.2
Solar tubes Protective equipment
7.2.1 7.2.2 7.2.3 7.2.4 7.2.5 7.2.6 7.2.7 7.2.8 7.2.9
Manual fitness training tools Sports and gymnastic mattresses Aids for aerobics and stretching Sports clothing for fitness Sports footwear Aids for exercise in pregnancy Rehabilitation aids Towels, sheets, housecoats, bathrobes Others
3.2.1.5 3.2.1.6 3.2.1.7 3.2.1.8 3.2.1.9 3.2.1.10 3.2.1.11
Fans Measuring and regulation systems, equipment Pumps Solar technology Thermal pumps Systems for heat recuperation Heat exchangers
3.2.2 3.2.2.1 3.2.2.2 3.2.2.3 3.2.2.4 3.2.2.5
Sanitary technology Fixtures and fittings and accessories Showers Feet disinfection systems Protection from corrosion Measuring and regulation systems, equipment
3.3
Outfitting and complementary equipment
3.3.1 3.3.1.1 3.3.1.2 3.3.1.3 3.3.1.4 3.3.1.5 3.3.1.6
Accessories Bathroom extracts, oils Sauna essences Sauna salts Seating benches Thermometers, hygrometers Others
4.
8.
Disinfection, maintenance and cleaning
11.
Associations, organisations, schools
8.1 8.2
Instruments for disinfection, maintenance and cleaning Chemical cleaning agents and maintenance means
9.
Technical literature, publishing
9.1 9.2 9.3
Technical literature Magazines Publishing houses
11.1 11.2 11.3 11.3.1 11.3.2
Professional associations Organisations Education Re-qualification courses Additional training
12
Financial services
10.
Building and designing firms
10.1. 10.2. 10.3.
Building firms Designing firms Consulting and designing firms
12.1 12.2 12.3 12.4
Banks Developer’s companies Leasing companies Insurance companies
Binding Registration for Firm’s Participation
1
for internal use only
registration number: ________ date: ___________
8th – 11th March, 2007 Prague LetÀany Exhibition Centre
Closing Date for Binding Applications is December 15, 2006
Company name _____________________________________________________________________________________ Country __________________________ Address: Street _______________________________________________ Town_________________________________ Postcode _________________________ Tel. _________________________________________________________ Fax ___________________________________________________________________ Person responsible for exhibition _________________________________ Telephone ____________________________ Fax _____________________________ Mobile ______________________________________________________ E-mail _________________________________________________________________ Director (incl. degree) ______________________________________________________ Internet ____________________________________________________ BIN _____________________________________________________________________ Bank connection (IBAN) ______________________________________
If you want to receive the correspondence concerning your participation to another address, please, state it here.
Company name _____________________________________________________________________________________ Country __________________________ Address: Street _______________________________________________ Town_________________________________ Postcode _________________________ Tel. _________________________________________________________ Fax ___________________________________________________________________ Person responsible for exhibition _________________________________ Telephone ____________________________ Fax _____________________________ Mobile _______________________________________________________ E-mail ________________________________________________________________ BIN _____________________________________________________________________ Bank connection (IBAN) ______________________________________
We hereby order exhibition area for exhibition Nomenclature number (fill out)
INDOOR AREA
Front _________ m x Depth _________ m (full meters only) Total m2 _________ (area only, without stand construction) row exposition 55 EUR/m2 1 side open
❏
Discounts from ordered floor space:
corner exposition 65 EUR/m2 2 sides open minimum stand space 20 m2
❏
✕ ❏ tick appropriate
❏
U-shape 75 EUR/m2 3 sides open minimum stand space 40 m2
- 5 % of ordered stand space over 50 m2
❏
island 85 EUR /m2 4 sides open minimum stand space 60 m2
- 10 % of stand space under machinery over 100 m2
Surcharge for double-storey part of the exposition 30 EUR/m2 ___________ total m2 ___________ Total height of the stand will be ___________ cm. The dominant above 300 cm of the stand will be ___________ cm. (if these data are not given we will assume that the overall height of the whole stand will be under 250 cm)
OUTDOOR AREA
35 EUR/m2
flag pole
❏ YES ❏ NO
Front _________ m x Depth _________ m (full meters only) Total m2______________
(area only, without stand construction) Minimum stand area 12 m2. The ordered area must be sufficient to include the area of the stand roof. After receiving your Binding Application we will mail you a confirmation of registration and an advance invoice for the ordered area. Then you will receive the floor plan of the Exhibition (place allocation arrangement) with a mark of your location and the Order Catalogue of other Services.
The Registration Fee is 100 EUR
(all prices are given without VAT)
Obligatory insurance of the exhibitor CZK 30 EUR We order the construction of our stand by ABF, a.s. in advance
❏ YES
❏ N0
If not, please write down the providing company’s name _____________________________________________________________ We accept all items of the enclosed Conditions for Participation in exhibition Bazény, sauny, solária & wellness 2007. We commit to pay all Advance Invoices and also the Final Invoice promptly.
Place and date _______________________________________
_____________________________________________________ Company stamp, authorised signature
Note: All information must be filled out. The application is valid only when the company stamp, authorised signature, place and date are given. , a.s. Václavské námûstí 29, 111 21 Praha 1 Tax number: CZ63080575
tel.: +420 225 340 232, 261 fax: +420 222 891 199
e-mail:
[email protected] www.vystava-bazeny.cz
Commercial Conditions for Participation at the Trade Fair Bazény, sauny, solária & wellness 2007 ARTICLE I. - PARTICIPATION AT THE EXHIBITIONS AND ASSIGNMENT OF AREAS The basic precondition for the participation at Exhibitions is the delivery of the properly completed Binding Registration to ABF, a.s. (hereinafter referred to as ABF only) by the returning date and the payment of the advance for the required area within the due term stated in the invoice. After the receiving of the Binding Application ABF will send to the Exhibitor a confirmation about its receiving (herewith contractual relation will come into being) an advance invoice for the ordered area and a registration fee for the exhibiting company. The Exhibitor will only be registered when the advance payment is evidently on the ABF's account. The final Invoice and deduction of advances will only be sent to the exhibitor after the finishing of the exhibition. ABF reserves the right to reduce the ordered area, to change its shape and location - the order of the participation is binding for the Exhibitor also in this case. The advance invoice for the ordered services will be sent before the beginning of the Exhibition and its full payment will be a precondition for the beginning of the assembly of the exposition. The final invoice including VAT and deduction of advances will only be sent after the finishing of the Exhibition. If the Exhibitor fails to settle the charges for the area lease and/or the Exhibitor's Registration Fee in full amount and due term, ABF will confirm the allocation of the area lease to another applicant without the original Applicant being alowed to claim ABF for possible expenditures ncurred. The Organiser will not accept and will not indemnify any claims for damages which the Exhibitor could have incurred for this reason. ARTICLE II. - TERMS OF PAYMENT All prices are mentioned without VAT. Basic price of the lease and Registration Fee includes: - Lease for the area during the assembly, exhibition and dismantling - Insertion into the Exhibition Catalogue to the extent of data stated in the Order of Catalogue Entry into the Catalogue (see page 3). - Insertion into the orientation system of the Exhibition - Five Exhibitor's Cards for the firms with an ordered area up to 30 m2 - One Exhibitor's Card for each 10 m2 (including a part of this area) exceeding the area of 30 m2 - Assembly/Dismantling Cards for the Working Teams - Cards for free entries into the area during the assembly and dismantling works (during the assembly and disassembly the parking time in the area is limited the entry is committed on the deposit settlement) - One issue of the Exhibition Catalogue - Invitation for the Exhibitor’s party for 2 persons Basic price of the lease and Registration Fee does not include: - External walls of the stand, nor any other equipment of the stand, nor the walls of the neighbouring stands. For each other firm, which the Exhibitor will present in their expositions (by the presentation of exhibits, with an advertisement panel, company logo, commercial name, folders, video programmes, etc.), the Exhibitor is obliged to pay the Coexhibitor's Registration Fee. The firm properly registered in this way will be presented in the Exhibition Catalogue to the full extent as Exhibitor. In the case of any breach of this principle the Exhibitor will be obliged to pay the Co-exhibitor's Registration Fee in adouble amount during the Exhibition. - other data or details about divisions, branches and commercial representatives Cancellation Conditions ABF will keep the below stated percentages of the price of fulfilment, depending on the term of the cancellation of the Binding Application: 50 % on the cancellation of the Binding Application in the term from January 22 to February 18, 2007 inclusive 100 % on the cancellation of the Binding Application in the term from February 19, 2007 to the beginning of the Exhibition ARTICLE III. - EXHIBITION AREA ABF leases: - indoor exhibition area without any equipment, with the possibility of power supply, water pipeline, sewerage, telephone and cleaning facilities on the basis of the Application. - outdoor exhibition area on the defined open areas of the Exhibition Centre. If the exhibiting firm itself does not provide for the stand or if it does not order its construction by ABF, it will have only the ordered exhibition area without borders at its disposal. ARTICLE IV. - SAFETY AND INSURANCE Exhibitors are not allowed to store or use in their expositions or in the territory of theExhibition Centre any combustible and radioactive substances, exploding materials, acids, poisons and other health harming substances. Exhibitors are obliged to observe the technical, fire and safety regulations which are in force.
At the Exhibition Centre ABF is not responsible towards Exhibitors, their Co-exhibitors and assembly firms for any losses, destruction or any damage concerning the exhibits, equipment and outfit of the stands, goods, packages, packing materials whatsoever, whether the loss, destruction or other damage occurred during the assembly, transportation or during the Exhibition. Therefore Exhibitors and assembly firms are obliged to have all the exhibitions and above mentioned materials insured, it applies to the Exhibitors' own materials as well as to those belonging to their Co-exhibitors and for the entire period of their presence at the Exhibition Centre, such an insurance being made against any danger that can be considered in the connection with the Exhibitors' property. ARTICLE V. - TECHNICAL AND FIRE REGULATIONS, ENERGY USAGE REGULATIONS AND DIRECTIVE FOR THE USE OF TEMPORARY INSTALLATIONS During the time of the Exhibition as well as during the assembly and dismantling works smoking and naked flame handling is prohibited in all of the indoor areas. Exhibitors are obliged to observe, during the assembly, in the course of the Exhibition and during the dismantling, law regulations of the Czech Republic and technical standards for the above mentioned areas including work safety regulations and handling all technical equipment. Furthermore, the Exhibitors are obliged to observe appropriate fire regulations valid for individual exhibition areas and the instructions of the authorised members of the fire assistant service and of the ABF staff. Temporary electrical devices must be in accordance with the âSN 341090 standard and must comply with all other electro technical regulations in force. The electrical installation works can only be carried out by a firm duly authorised to do so, i.e. possessing the Certificate of Competence according to the Law No. 174/1968 Coll., §4 part f and §3 part 2 of the - âÚBP No. 20/1979 Coll. ARTICLE VI. - BASIC CONDITIONS FOR THE CONSTRUCTION OF THE STAND The construction of the Stand is offered and realised by ABF. The Exhibitors who will not make any use of this offer and who prefer to ensure the constructions of their stands by themselves or through their agencies are obliged to put forward the ground plan and front view of the stand with the marking of dominant heights for approval to be given by ABF, not later than January 26, 2007 and to announce the name of the implementation firm. Exhibitors are obliged to maintain the floor plan of the exhibition area, i.e. they may not exceed the designated area with anything from the ground plan point of view and the same applies to the dominant heights which are shifted out (Attention! - the roofs of outdoor stands generally exceed their ground plan). Exhibitors are obliged to leave the exhibition area after the dismantling in the same conditions in which it was before the beginning of the assembly. Any destruction, exceeding pollution etc., will have to be paid for by the Exhibitor according to the real cost of the removal of damage (pollution). ARTICLE VII. - FINAL PROVISION All complaints on the part of Exhibitors towards ABF during the assembly and in the course of the Exhibition shall be produced in written form to the Exhibition Manager of ABF or to an authorised representative before the end of the Exhibition, or during the dismantling works until they are completed. Any other claims on the part of Exhibitors towards ABF can be applied for within two (2) weeks after the end of the Exhibition. All possible claims of the Exhibitors will cease to exist upon the expiration of 6 months after the end of the Exhibition. ARTICLE VIII. - CLOSING DATE for Applications and Orders The Binding Registartion shall be sent to the address: ABF, a.s. VeletrÏní správa (Trade Fair Administration), Václavské nám. 29, 111 21 Praha 1, Czech Republic till December 15, 2006, the Binding Order of Technical Services, the Registration of Other Firms - Co-exhibitors and the Order of Advertising in The Exhibition Catalogue till January 26, 2007. We recommend that all correspondence to be sent by registered mail.
1a
Binding Order of Technical Services Deadline for Binding Orders is January 26, 2007
2
Company name __________________________________________________________________________________________________________________________
All services that are not ticked will be automatically considered as NOT ORDERED.
INDOOR AREA Order for electric power supply during the exhibition – tick appropriate
✕ ❏
Power supply 230 V - L + N + PE up to 2 kW - 1 socket
up tot 3 kW - 1 socket
up to 5 kW – 2 sockets
up to 6 kW – 2 sockets
110 EUR
130 EUR
150 EUR
180 EUR
Power supply 400 V - 3L + N + PE up to 9 kW – socket 16 A up to 15 kW – socket 32 A
up to 21 kW – socket 32 A
up to 40 kW – socket 63 A
220 EUR
350 EUR
550 EUR
❏ ❏
❏
❏
240 EUR
❏
❏
❏
❏
Please order a power supply for more than 40 kW separately. Please contact us for an individual negotiation. Refrigerator circuit - 20 EUR price does not include electric power consumption
number of circuits _____
Water supply
Subscribe line/internet connection
Cleaning of an exhibition area
price does not include lease of a sink
price does not include message accounting
daily cleaning
number of supply mains ______ 180 EUR (1 pce.)
number of supply mains ______ 90 EUR (1 pce.)
total m2______ 0,5 EUR/m2/day
OUTDOOR AREA Order for electric power supply during the exhibition – tick appropriate
✕ ❏
Power supply 230 V - L + N + PE up to 2 kW - 1 mains socket
up tot 3 kW - 1 mains socket
up to 5 kW – 2 mains sockets
up to 6 kW – 2 mains sockets
110 EUR
130 EUR
150 EUR
170 EUR
Power supply 400 V - 3L + N + PE up to 9 kW – mains socket 16 A up to 15 kW – mains socket 32 A
up to 21 kW – mains socket 32 A
up to 40 kW – mains socket 63 A
230 EUR
350 EUR
600 EUR
❏ ❏
❏
❏
260 EUR
❏
❏
❏
❏
Please order a power supply for more than 40 kW separately. Please contact us for an individual negotiation. Refrigerator circuit - 33 EUR price does not include electric power consumption
number of circuits _____
Water supply
Subscribe line/internet connection
Cleaning of an exhibition area
price does not include lease of a sink
price does not include message accounting
daily cleaning
number of supply mains ______ 180 EUR (1 pce.)
number of supply mains ______ 90 EUR CZK (1 pce.)
total m2______ 1 EUR/m2/day
We accept all items of the enclosed Conditions for Participation in exhibitions Bazény, sauny, solária & wellness 2007. We commit to pay all Advance Invoices and also the Final Invoice promptly.
Place and date _______________________________________
_____________________________________________________ Company stamp, authorised signature
Note: All information must be filled out. The application is valid only when the company stamp, authorised signature, place and date are given.
Technical Conditions for Participation at Trade Fair Bazény, sauny, solária & wellness 2007 ARTICLE I. - TIME DATA The Exhibition Bazény, sauny solária &wellness will start on March 8, 2007 and end on March 11, 2007 Assembly: March 6, 2007 from 8:00 a.m. to 10:00 p.m. March 7, 2007 from 8:00 a.m. to 10:00 p.m. Dismantling: March 11, 2007 from 4:00 p.m. to 12:00 p.m. March 12, 2007 from 0:00 a.m. to 12:00 a.m. For the public the Exhibition will be open : March 8-9, 2007 from 10:00 a.m. to 6:00 p.m. March 10, 2007 from 9:00 a.m. to 6:00 p.m March 11, 2007 from 9:00 a.m. to 4:00 p.m ARTICLE II. - EXHIBITION AREA ABF leases: - indoor exhibition area without equipment with the options of the inlet of power supply, water and sewerage lines, telephone and cleaning services on the basis of orders. - outdoor exhibition area in the designated open areas of the Exhibition Centre. Height of halls, floor load It makes it possible for a limited number of expositions to construct double-floor stands as well as dominant heights. The effective height varies from 3.0 to 8.0 m. Maximum height of an exhibit for transportation to the halls is 3 m. Basic load capacity of floors is 1500 kg/m2. ARTICLE III. - TECHNICAL SERVICES On the Exhibitor's order it is possible to provide the inlet of power supply, water and sewerage, telephone and cleaning services (once a day vacuum-cleaning and emptying of the waste basket) to all expositions in both indoor and outdoor areas. Order of power supply For the stands, which are not ordered to build by ABF, your own switchboard is presupposed - it should be adapted to the 5-wire distribution system, or the voltage system TNS 3L + N + PE, 50 Hz, respectively. Single-phase connection of the exposition is carried out through a usual plug of 230V/16A - L + N +PE, three-phase consumers must be fitted with a recommended ball plug of 400V/32 A - 3L + N + PE. The connection of larger power inputs will be carried out upon an agreement with ABF. Electrical equipment of Exhibitors which is not fitted with separate operation N and protecting PE (zero) wires, or which is not fitted with a protecting wire, without its featuring double insulation, or the wires of which do not have appropriate section, will not be allowed for the reason of the protection of visitors from electric accidents and for fire reasons. In the case of necessity it is possible to use the work of an electrician at a price of 10 EUR per hour (each hour started is taken into account), which is to be paid immediately at the cash desk of the Trade Fair Administration. Electric inspection is carried out by ABF and it is OBLIGATORY. Its price is not included in the price for electrical inlet. If the electrical installation does not comply with the requirements, it will not be connected, to the prejudice of the Exhibitor. We ask the Exhibitors to consider their real demands for the power supply input. For the purpose of a more exact order we provide the following examples: the illumination of a 9 m2 stand about 0.5 kW, refrigerator 0.4 kW, kitchen complete set about 3.5 kW, coffee machine about 0.8 - 1.2 kW, kettle about 2 kW, two hot-plate cooker about 2 kW. These power inputs are only for your orientation - it always depends on the particular electrical appliance which is connected. CAUTION! In the case you intend to use a refrigerator in your stand, we recommend to order the refrigerator circuit separately, as it will not be turned off overnight. Order of water and sewerage The interconnection of the sink, i.e. of an ordinary battery to the closing valve and of an ordinary siphon outlet with a 5/4i hose is included in the price of the water inlet and sewerage. The lease of the sink is not included in the price for water inlet and sewerage. If you want to make a wider use of the plumber's service, you will be charged 10 EUR per hour (each hour started is taken into account) and you will pay this service at the cash desk of the Trade Fair Administration. Internet connection Is realised by connection to local network ETHERNET 10/100MB. Computers of exhibitors have to be equipped with net card ETHERNET 10/100MB with possibility of connection to connector RJ-45. For a connection to network is necessary to adjust IP addresses from DHCP server. To obtain fixed addresses will be possible only for extra charge and after negotiations with techniques of ABF. The exhibitor in this case will not pay any further telecommunication fees. Other services ABF will arrange: working illumination, fire service, ordinary cleaning of communications, dispatching and customs services, health service, insurance service, telephone and fax centre for the Exhibitors, Press centre service, business centre, the Fair Protocol and catering facilities. ARTICLE IV. - CONSTRUCTION OF STAND - EXPOSITION ABF will ensure the construction of stand in both indoor and outdoor areas on the basis of a separate order distributed by ABF together with the Binding Order of Standardised Stands. There are 4 types of systems of standardised stands available: OCTANORM, SYMA, COMBI, DIAGONAL - sizes: 3x3, 3x4, 3x5, 3x6, 4x4, 4x5, 4x6 and 5x5 m. - standardised stands contain: - stand partition walls made of white panels - ceiling raster - carpet – grey lettering panel (fascia) for identification of the exposition - 30 cm high (according to the length of the front side) - 2 to 6 spotlights (according to stand size - without electric power supply) - 1-2 mains sockets 220 V (without electric power supply) CAUTION! It is necessary to order Electic power supply separately. ABF offers to order movable equipment for standardised stands. ABF provides construction of bespoke projected stands for indoor area as well basic prices of stands contain: - stand partition walls made of white panels - ceiling raster - lettering panel (fascia) for identification of the exposition - 30 cm high (according to the length of the front side) Carpet and movable equipment must be ordered separately. For outdoor area the ”MONTI” stands of dimensions 9, 16, 18, 27 and 32 m2 ( or 16, 20, 28, 40 and 45 m2 – the edge of the roof) Order form with conditions of realisation by ABF is enclosed to the floor plan. These documents are sent to exhibitors after closing day for Binding Registrations.
ARTICLE V. - TECHNICAL AND OPERATING CONDITIONS -The architectural realisation and the operation of the exposition must not disturb or limit other expositions. -The outline of the exhibition stands must not exceed the outline of the leased exhibition area, which applies to the space above the ceiling structure of the stand as well. -Possible overhang of the collar or eye-catcher of the stand to the path is allowed on the basis of a preliminary approval given by ABF, if the minimum height of the bottom edge is 3 m, and it will be subject to the payment of 20 EUR. -In the case of expositions smaller than 50 m2 incl. the dominant height exceeding 3 metres will be subject to payment (it does not concern the double-floor expositions and flag poles). -Except for handling trucks, entry into the exhibition areas is prohibited for any means of transport and cars. -If the floor of the hall is damaged, the Exhibitor will be obliged to reimburse the damages to the full amount. -Smoking and naked flame handling is strictly prohibited in all indoor exhibition areas, any breach of this ban will result in a fine paid on site. -No electrical appliances may be left in operation without any control. When leaving the place, the appliances must be disconnected from the mains. -It is not allowed to hang any eye-catchers, flags, etc. on the structure of the halls with the exception of the cases pre-discussed with ABF and subject to a payment. -During the assembly it is forbidden to cut and grind any building elements, which causes excessive pollution and dust (plasterboard, tile materials, fibreboard and other similar materials). -The stand must not touch the structure, walls and roof of the exhibition halls with any of its parts. The distance between the highest point of the stand and the hall roof must be at least 70 cm. -It is forbidden to discharge the remains of paints and other toxic substances which could pollute or otherwise endanger the environment into the sewerage, sinks and basins. The Exhibitors or the firms authorised by Exhibitors are obliged to take these substances away and ensure their disposal on their own expenses. -During the Exhibitions it is permitted to perform audio-visual, acoustic, musical, dancing and other productions for the time not exceeding 8 minutes once an hour, and only provided that the other Exhibitors will not be disturbed by the operation of these facilities. If this condition is breached, the Exhibitor will have to pay a fine amounting to 170 EUR and in the case of repeated breach it will be forbidden for the breaching Exhibitor to operate all such productions. -Exhibits which will be presented in the operation can only be serviced by the persons authorised thereto. Presented exhibits must be secured by the Exhibitor in such a way that no third party could handle them wilfully. -Except for the prescribed working business hours of the Exhibitions and permitted time interval for the supplying of the stands it is forbidden to stay in the exhibition areas. Please, respect for this reason the instructions of the Security Service and the ABF staff. -By the deadline of disassembly works the Exhibitor or his assembly company is obliged to hand over the leased exhibition area empty and in the conditions in which it was taken over, i.e. also the floor covering (carpets, PVC) must be removed as well as the sticking carpet tapes, such a removal being carried out at the expenses of the Exhibitors. Should the exhibition area be damaged (by boring, cutting, breaking, excessive polluting, etc.), the Exhibitor will be obliged to reimburse the damages in full. -If the deadline for the clearing of the exhibition area fails to be observed, a penalty amounting to 170 EUR per m2 of the non-cleared area will be charged. In the necessary case the exposition will be cleared by ABF at the expense of the Exhibitor. The risks associated with the clearing shall be borne by the Exhibitor. -The placement of billboards, eye-catchers, banners as well as the distribution of printed and other materials out of the stand area is permitted only for consideration after prior negotiations with the ABF Trade Fair Administration in writing. ARTICLE VI. - HANDING OVER OF THE BACKGROUNDS FOR THE REALISATION OF TECHNICAL CONNECTIONS AND STANDS Exhibitors who order the construction of the stand by ABF will send their orders within the term provided for in the Order of the stand. Any changes relating to the Order of Technical Services, construction and equipment of stands required by the Exhibitor additionally after the term of commencement of the assembly will only be managed after the fulfilment of the properly ordered work and services towards the other Exhibitors. These additional orders of work and services can be charged by ABF with a surcharge amounting to as much as 100% of the price calculated. The payment shall be made by the Exhibitor in cash on site. The Exhibitors who ensure the construction of the stand on their own or through an advertising or realisation agency will send to ABF and within the term provided for in the Order Catalogue of Services the design of the stand for approval (in the front view and ground plan) where all possible dominant heights and eye-catchers, including the stand orientation within the framework of the ordered area will be drawn by means of the location dimensioning of the inlets of power supply, water and sewerage including the name of the realisation firm. It is required to have a static appraisal for a construction of double storey stands! In the case that the Exhibitors fail to send appropriate backgrounds within the requested terms, they will expose themselves to the danger of possible difficulties during the realisation of the stands and possibly to additional costs connected with the displacement of the inlets of power supply, water and sewerage.
2a
Order of Catalogue Entry Deadline for Binding Orders is January 26, 2007
3
FREE OF CHARGE Company name _____________________________________________________________________________ Country __________________ Address: Street ____________________________________________ Town ____________________________ Postcode ________________ Tel. ______________________________________________________ Fax ______________________________________________________ E-mail ____________________________________________________ Internet ___________________________________________________ Brief description of exhibits or services (maximum 240 characters) ____________________________________________________________________________________________________________________ ____________________________________________________________________________________________________________________ ____________________________________________________________________________________________________________________ ____________________________________________________________________________________________________________________ ____________________________________________________________________________________________________________________ ____________________________________________________________________________________________________________________ ____________________________________________________________________________________________________________________ ____________________________________________________________________________________________________________________
The stated data will be presented free of charge in the Exhibition Catalogue and in the Orientation system during the exhibition. Please write down the exact company name as you want it to be published in the Exhibition Catalogue. The first letter must correspond to the letter under which you want the firm to be indexed. The text is subject to be edited by ABF, a.s. We request that the Exhibition Catalogue should include contact addresses (without any descriptions) about our branches, divisions, commercial representatives etc. We agree to pay the fee of 20 EUR (without VAT) for each address. Number of additional addresses in the Exhibition Catalogue ____________________________(if necessary please copy this form) 1. Company name _____________________________________________________________________________ Country __________________ Address: Street ____________________________________________ Town ____________________________ Postcode __________________ Tel. ______________________________________________________ Fax _______________________________________________________ E-mail ____________________________________________________ Internet ____________________________________________________ 2. Company name _____________________________________________________________________________ Country __________________ Address: Street ____________________________________________ Town ____________________________ Postcode __________________ Tel. ______________________________________________________ Fax _______________________________________________________ E-mail ____________________________________________________ Internet ____________________________________________________ 3. Company name _____________________________________________________________________________ Country __________________ Address: Street ____________________________________________ Town ____________________________ Postcode __________________ Tel. ______________________________________________________ Fax _______________________________________________________ E-mail ____________________________________________________ Internet ____________________________________________________
Place and date _______________________________________
_________________________________________________ Company stamp, authorised signature
Note: All information must be filled out. The application is valid only when the company stamp, authorised signature, place and date are given.
Registration of Other Firms - Co-exhibitors Deadline for Binding Orders is January 26, 2007
Main Exhibitor _______________________________________________________________________________________________________________________ We hereby declare that the following firms (our co-exhibitors) will be presented at our exhibition area. We will also pay the registration fee 170 EUR (without VAT) per each co-exhibitor and require to include them in the Exhibition Catalogue. Number of co-exhibitiors __________________ (if necessary, please, copy this form) 1. Co-exhibitor Company name _____________________________________________________________________________ Country _________________________________ Address: Street ____________________________________________ Town ____________________________Postcode _________________________________ Tel. ______________________________________________________ Fax ______________________________________________________________________ E-mail ____________________________________________________ Internet __________________________________________________________________ Brief description of exhibits or services (maximum 240 characters)
_______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ The stated data will be presented for free in the Exhibition Catalogue and in the Orientation system during the exhibition. Please write down the exact company name as you want it to be published in the Exhibition Catalogue. The first letter must correspond to the letter under which you want the firm to be indexed. The text is sub ject to be edited by ABF, a.s. Person responsible for exhibition ___________________________________________ Telephone ___________________________________________________ Fax ______________________________________________________ Mobile _______________________________ CO REG.No. ________________________ 2. Co-exhibitor Company name _____________________________________________________________________________ Country _________________________________ Address: Street ____________________________________________ Town ____________________________Postcode _________________________________ Tel. ______________________________________________________ Fax ______________________________________________________________________ E-mail ____________________________________________________ Internet __________________________________________________________________ Brief description of exhibits or services (maximum 240 characters)
_______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ _______________________________________________________________________________________________________________________ The stated data will be presented for free in the Exhibition Catalogue and in the Orientation system during the exhibition. Please write down the exact company name as you want it to be published in the Exhibition Catalogue. The first letter must correspond to the letter under which you want the firm to be indexed. The text is sub ject to be edited by ABF, a.s. Person responsible for exhibition ___________________________________________ Telephone ___________________________________________________ Fax ______________________________________________________ Mobile _______________________________ CO REG.No. ________________________
Place and date _______________________________________
_________________________________________________ Company stamp, authorised signature
Note: All information must be filled out. The application is valid only when the company stamp, authorised signature, place and date are given.
3a
Order of Advertising in The Exhibition Catalogue Deadline for Binding Orders is January 26, 2007
4
Company name____________________________________________________________________________________ Colour advertising:
Monochrome advertising: company logo with entry
❏ 1/1 page, cover (2nd,3rd, 4th page) ❏ 1/1 page ❏ 1/2 page
800 EUR 400 EUR 250 EUR
❏ 1/1 page ❏ 1/2 page ❏
350 EUR 180 EUR 30 EUR
Prices do not include VAT – 19%, companies which are not exhibitors must include 20% surcharge ________________________________________
Technical requirements on backgrounds • In case of delivery on films: print – offset, raster 150 lpi, classical angle rotation C=75, M=15, Y=0, K=45 ready-made all-page advertisements in the PDF format, printing quality (image resolution: at least min. 300 DPI), including the cutting-off and register signs • Already formatted advertisements in the format "Quark Xpress v. 3. 2." and earlier for MAC, it is necessary to deliver all images used and font definitions (Packing function) together with the document • Texts should be in TXT, T602, Word formats • Photographs and slides up to the A4 format, max. magnifying required: 300% • Printed templates up to the A4 format, in order to achieve a good-quality result it is necessary to diminish below 75% • Formats TIF, EPS, JPG, AI (Adobe Illustrator up to v. 8), CDR (Corel Draw up to v. 8); colour raster images with a resolution of 300 DPI at a scale of 1:1, pen sketches and black-white logos in 600 DPI, in the case of vector formats of the script please convert to curves • Colour specification in the CMYK or PANTONE for mats to each file, exactly marked and named • it is necessary to add a hard copy version • Data media: ZIP, JAZ 1 GB, floppy disks 3,5”, CD ROM • The sources in the electronic form can be sent to e-mail
[email protected] with specification of the name and issue of the title, format and purchaser
The Exhibition Catalogue Basic characteristics: It is official exhibition catalogue containing: • Alphabetical list of exhibitors • Addresses, Tel., FAX, E-mail • Internet pages • Brief description of exhibits or services in Czech and English language • Location of expositions • Orientation plan of Prague LetÀany Exhibition Centre • Information about an accompanying program • Companie’s advertising
Place and date _______________________________________
Format: 120 x 210 mm Edition: 3000 pce. Distribution: Free of charge: exhibitors, accredited journalists, official guests, members of ABF Club Sale: during the exhibition it is available in Prague LetÀany Exhibition Centre Sale: it is available in ABF bookstores in Prague (Václavské nám. 29, MimoÀská 645, PVA facilities in âeské Budûjovice, PlzeÀ) Sale: e-shop – www.eProdejna.cz
_________________________________________________ Company stamp, authorised signature
Note: All information must be filled out. The application is valid only when the company stamp, authorised signature, place and date are given. Deadline for Binding Orders is January 26, 2007
Application for the Participation in the Competition for GRAND PRIX
5
Deadline for Binding Orders is January 26, 2007 Registration fee for each exhibit taking part in the competition is EUR 70. A package of exhibits representing one topical unit can be declared as one exhibit.
for internal use only_____________________________ registration number:_____________________________ date_____________________________
Basic criteria: technological solution, original idea, outstanding quality for acceptable price, ecological points of view, chemical and biological beneficial nature, general properties characterising a considerate relationship to the environment and design. The Committee will assess all parameters of the products beforehand on the basis of the sent documentation (test protocols, certificates, leaflets, folders, specialised documentation, price list, etc.) and the complying with the criteria will be verified directly at the Fair as well as the visual appearance of the exhibits. Please, send the above mentioned documentation together with the Application for the Participation in the Competition by January 26, 2007. The supplementary applications will be accepted on the basis of preliminary negotiation. 1. Company name ______________________________________________________________________________________________________________________ Title _________________________________________________________________________________________________________________________________ Producer _______________________________________________________________________________________________________________________________ Description of exhibit _____________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________________________ Characteristics of the properties for which we enlist the product to the Competition __________________________________________________________________ ______________________________________________________________________________________________________________________________________ 2. Company name ______________________________________________________________________________________________________________________ Title _________________________________________________________________________________________________________________________________ Producer _______________________________________________________________________________________________________________________________ Description of exhibit _____________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________________________ Characteristics of the properties for which we enlist the product to the Competition __________________________________________________________________ ______________________________________________________________________________________________________________________________________ 3. Company name ______________________________________________________________________________________________________________________ Title _________________________________________________________________________________________________________________________________ Producer _______________________________________________________________________________________________________________________________ Description of exhibit _____________________________________________________________________________________________________________________ ______________________________________________________________________________________________________________________________________ Characteristics of the properties for which we enlist the product to the Competition __________________________________________________________________ ______________________________________________________________________________________________________________________________________
place, date____________________________________
Note: The application is only valid when the place, stamp and signature are given. The documentation and samples will not be returned if not explicitly requested
________________________________________ stamp, signature
Order of Standardised Stands for Indoor Area
6
It is not possible to adapt standardised stands. It’s price contains: - stand partition walls made of white panels - ceiling raster - carpet – grey - lettering panel for identification of the exposition - 30 cm high (according to the length of the front side) - 2 to 6 spotlights (according to stand size - without electric power supply) - 2 mains sockets 220 V (without electric power supply) - stand 9m2 includes a cubicle 1x1 m with shelves and a door - stands 12-16 m2 include a cubical 1x2 m with shelves, a door and an illuminated ceiling (without electric power supply) - stands 18-25 m2 include a cubical 2x2 m with shelves, a door and an illuminated ceiling (without electric power supply) The horizontal projection of standardised stands is specified on the next page. It is not possible to change or add anything to the basic equipment of standardised stands. But it is possible to order other movable equipment. Sizes and prices of standardised stands:
Type A
3 x 3 m . . . . . . . . . . . . . . . . . . . . price
330 EUR
Type B
3 x 4 m . . . . . . . . . . . . . . . . . . . . price
430 EUR
Type C
3 x 5 m . . . . . . . . . . . . . . . . . . . . price
530 EUR
Type D
4 x 4 m . . . . . . . . . . . . . . . . . . . . price
560 EUR
Type E
5 x 5 m . . . . . . . . . . . . . . . . . . . . price
860 EUR
Type F
4 x 6 m . . . . . . . . . . . . . . . . . . . . price
830 EUR
Type G
4 x 5 m . . . . . . . . . . . . . . . . . . . . price
690 EUR
Type H
3 x 6 m . . . . . . . . . . . . . . . . . . . . price
620 EUR
Company name _______________________________________________________________________________________ Exhibition Hall no ________________________ sector ___________________________ stand no.____________________ Binding order of the construction of the standardised stand.:
We require movable equipment If YES, please fill out the form:
fill out type
tick Order of movable equipment
All prices are given without VAT.
Place and date _______________________________________
____________________________________________ Company stamp, authorised signature
Note: All information must be filled out. The application is valid only when the company stamp, authorised signature, place and date are given. Deadline for Binding Orders is January 26, 2007
Standardised Stands Standardised stands contain: ● stand partition walls made of white panels ● ceiling raster ● carpet – grey ● lettering panel for identification of the exposition - 30 cm high (according to length of the front side) ● 2 to 6 spotlights (according to stand size - without electric power supply) ● 2 mains sockets 220 V (without electric power supply) ● stand 9m2 includes a cubicle 1x1 m with shelves and a door ● stands 12-16 m2 include a cubical 1x2 m with shelves, a door and an illuminated ceiling (without electric power supply) ● stands 18-25 m2 include a cubical 2x2 m with shelves, a door and an illuminated ceiling (without electric power supply)
Type A
Type B
Type C
Type D
Type E
Type F
Type G
Type H
lettering panel
mains socket
shelves
spotlight
ceiling panel – light
6a
Order of Individually Projected Stands for Indoor Area
7
Company name _______________________________________________________________________________________ Exhibition Hall no. _______________________ sector ___________________________ stand no.____________________ Binding order of the basic construction of the bespoke projected stand proportions _________ m x _________ m according to the layout on the next page of this order. The basic construction contains: 2-3 stand partition walls, ceiling raster, lettering panel for identification of the exposition - 30 cm high (according to the length of the front side). The price of the basic construction is 24 EUR/m2 up to 30 m2 (included) and 23 EUR/m2 over 30 m2. Over the limit of the basic construction we order following additional items of the building-block system: Item
EUR/UNIT
wall panel, white 100 x 250 graphic wall panel, 100 x 250 (it is possible to stick items on it) wall made of glass, 100 x 250 wing door rolling door curtain (EUR/1 running metre) carpet, grey (EUR/m2) carpet, (not grey) EUR/m2 specify the colour ___________ lettering panel, 30 cm high, EUR/running metre ceiling, white EUR/m2 ceiling, made of textile EUR/m2 ceiling, grid type EUR/m2 illuminated ceiling, fluorescent lamp type EUR/m2 glass showcase 100x100x250 with illumination glass showcase 100x50x250 with illumination bookshelf with 5 shelves, (assembled into the stand structure) spotlight 60-100 W halogen reflector 300 W halogen reflector 500 W triple mains socket self-standing panel 100 x 250 cm with a stand 100x50x50 cm and a lettering panel 100x30 cm
NUMBER
10 12 15 45 33 3 6 7 3 7 3 9 10 51 42 19 5 9 10 3
______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________ ______________
32
______________
All prices are given without VAT. We require movable equipment:
tick
If YES, please fill out the form: Order of movable equipment
Place and date _______________________________________
____________________________________________ Company stamp, authorised signature
Note: All information must be filled out. The application is valid only when the company stamp, authorised signature, place and date are given. Deadline for Binding Orders is January 26, 2007
Layout of the Horizontal Projection of Your Stand In the following grid please sketch your layout of the stand. Use symbols described under the grid to identify the location.
1m
Wall panel
Counter showcase
Mains socket 220 V
Chair
Cooker
Graphic wall panel
Elevator
Mains socket 220 V (night)
Bookcase
Wall made of glass
Rolling door
Lettering panel 30 cm
Bookshelf
Electricity
Ceiling raster
Illuminated ceiling
Table
Kitchen sink
Water drainage
Showcase with illumination
Spotlight
Round table
R
Distribution box (dependent on needs)
R
❄
Refrigerator
7a
Order of Movable Equipment
8
Company name _______________________________________________________________________________________
Binding order of the following movable equipment of the stand: Item
EUR/UNIT
table 70 x 120 x 75 table 70 x 70 x 75 round table - diameter 80 swivel chair upholstered chair plastic chair bar chair refrigerator 175 l pole coat rack wall coat rack elevated counter, covered, with a shelf of 100 x 100 x 80, possibility of 110 cm elevated counter, covered, with a shelf of 100 x 50 x 80, possibility of 110 cm desk showcase 100 x 50 x 80 lockable case 70 x 40 x 130 lockable case 80 x 40 x 80 itter bin hanging wire stand for advertising media pole wire stand for advertising media (A-shape) shelf 100 x 30 spotlight 60 - 100 W halogen reflector 300 W halogen reflector 500 W triple mains socket floor kitchen cupboard with shelves hanging kitchen cupboard kitchen cupboard with a sink and a water heater kitchen set with a sink, water heater, a small refrigerator and a cooker coffee maker (energy input 1, 5 kW) kettle (energy input 2 kW) cooker (energy input 2 kW)
NUMBER
10 10 10 7 5 3 8 30 3 6
_____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________
17
_____________________
15 32 10 7 2 7 5 5 4 9 10 3 13 10 50
_____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________ _____________________
140 7 7 5
_____________________ _____________________ _____________________ _____________________
All prices are given without VAT.
Place and date _______________________________________
____________________________________________ Company stamp, authorised signature
Note: All information must be filled out. The application is valid only when the company stamp, authorised signature, place and date are given. Deadline for Binding Orders is January 26, 2007
Layout of Movable Equipment for Exhibition Stands
8a ceiling raster 100 x 100 cm
lettering panel (fascia) 29 cm high
wall panel 100 x 250 cm 50 x 250 cm
graphic wall panel 100 x 250 cm 50 x 250 cm
ceiling, grid type 96 x 96 cm 47 x 96 cm
ceiling, illuminated 96 x 96 cm 47 x 96 cm
ceiling, made of textile 87 x 87 cm 87 x 37 cm
door, OCTANORM
rolling door, DORIS
tilting shelves 100 x 30 cm
bookshelf, OCTANORM 100 x 50 x 200 cm
showcase, OCTANORM (without shelves) 100 x 50 x 250 cm
desk showcase 100 x 50 x 100 cm 100 x 50 x 80 cm
display table 100 x 50 x 100 cm 100 x 50 x 80 cm
display table 100 x 100 x 100 cm 100 x 100 x 80 cm
display table 100 x 100 x 57 cm 100 x 100 x 80 cm
elevated counter 100 x 50 x 57 cm 100 x 50 x 80 cm
coffee table, DON 70 x 70 x 75 cm
round table diameter 80 x 72 cm
lockable case, Bona 80 x 40 x 80 cm
upholstered chair
refrigerator 175 l 60 x 60 x 84 cm
pole coat rack
pole stand for advertising media
kitchen set with a sink, a hanging cupboard 90 x 60 x 200 cm
Order of Graphic Works
9
Company name ________________________________________________________________________________
Suitable for lettering panel 30 cm high.
Company logo Company name
❏ yes ❏ yes
❏ no ❏ no
Specify your idea, colour of the foil for the logo and text on the lettering panel.
_______________________________________ Backgrounds for graphic works, the company logo and the name of your company should be mail registered to the following address: VeletrÏní správa ABF, a.s., Václavské námûstí 29, 111 21 Praha 1,Czech Republic Or it is possible to send them to the following e-mail:
[email protected]
We enclose our backgrounds. The number of attachments is ____________________
_______________________________________
Place and date _______________________________________
____________________________________________ Company stamp, authorised signature
Note: All information must be filled out. The application is valid only when the company stamp, authorised signature, place and date are given. Deadline for Binding Orders is January 26, 2007
Order of parking cards and complimentary tickets
10
Order of parking cards: Company name _______________________________________________________________________________ Parking places are at exhibitors disposal during the Trade Fair Bazény, sauny solaria & wellness, i.e. March 8 – 11, 2007, March 8-9, 2007 from 9:00 a.m. to 7:00 p.m. March 10, 2007 from 8:00 a.m. to 7:00 p.m March 11, 2007 from 8:00 a.m. to 5:00 p.m at the designated area of the PVA’s car park. Price for one parking card, including all 4 days, is 20 EUR (without VAT) The parking cards will be invoiced before exhibition together with other ordered services. P. cards will be issued in the Entrance hall while registrating. Note. If you don’t have a parking card , the drive-in will be possible on deposit 35 EUR.
We order ______________ pcs of parking cards
Place and date _______________________________
_____________________________________ Company stamp, authorised signature
Order of complimentary tickets
❏ 20 pcs
❏ 40 pcs
❏ 60 pcs
❏ more
Complimentary tickets must be company stamp given! Every utilized Complimentary ticket will be charged 2 EUR. Complimentary ticket can be changed for the registration ticket at the ticket office.
Complimentary ticket:
❏ To be collected personally at Trade Fair Management ABF, a.s. ❏ To be sent by mail
Place and date _______________________________
_____________________________________ Company stamp, authorised signature
Note: All information must be filled out. The application is valid only when the company stamp, authorised signature, place and date are given. Deadline for Binding Orders is January 26, 2007
