Preview only show first 10 pages with watermark. For full document please download

20121227 Sunbolts Eco Jbox

Assembling Instruction ECO JB Clamping/Soldering Type For Crystalline Module Electrical Rating: 1000V (TUV)/600V(UL), DC 20A ْ ◌C ْ ~ +90◌ ْ ◌C ْ Operation Temperature Range: -40 ◌ Caution: 1). The module must be isolated and disconnected during the assembling or disassembling process 2). Cannot be unplugged under load 3). The junction box is for in-factory assembling process with photovoltaic module, but can be maintained or repaired in field. 4). ESD protection and humidity control are requi

   EMBED

Share

Transcript

   Assembling InstructionECO JB Clamping/SolderingType For Crystalline Module    Electrical Rating: 1000V (TUV)/600V(UL), DC 20A Operation Temperature Range : -40◌◌C ~ +90 ◌◌C Caution: 1). The module must be isolated and disconnected during the assembling or disassembling process2).   Cannot be unplugged under load   3). The junction box is for in-factory assembling process with photovoltaic module, but can bemaintained or repaired in field.4). ESD protection and humidity control are required during the assembling and test process withmodule to avoid the damage of bypass diode. Preparation: Selected bypass diodes, Diotec SB1240 (ISC: 8A) , Diotec SB 1540 (ISC: 10A), and HY 20SQ040(ISC: 10.5A)Tool required for opening box cover and disconnecting dual certified connector (Firm Grip).    Flat Screw Driver for Opening BoxCover  Tool for Disconnecting Dual Certified(Firm Grip) Connector.  Unit: mm    Open the Box Cover  1). Use the flat screw driver to release the cover latch in the four corner of junction box.  2). Remove the box cover.    Inside of Clamping Type  Inside of Soldering Type 