Transcript
AS/NZS 3666.1:2002 Australian/New Zealand Standard ™ Air-handling and water systems ofbuildings—Microbial controlPart 1: Design, installation andcommissioning A S / N Z S 3 6 6 6 .1 B ui l d i n g C o d e of A u s t r al i aP r i m ar yr ef er en c e d S t an d ar d T h i s i s a f r e e 8 p a g e s a m p l e . A c c e s s t h e f u l l v e r s i o n a t h t t p : / / i n f o s t o r e . s a i g l o b a l . c o m . AS/NZS 3666.1:2002 This Joint Australian/New Zealand Standard was prepared by Joint TechnicalCommittee ME-062, Ventilation and Airconditioning. It was approved on behalf of the Council of Standards Australia on 8 March 2002 and on behalf of the Council of Standards New Zealand on 18 April 2002. It was published on 2 May 2002.The following interests are represented on Committee ME-062:Air-Conditioning and Refrigeration Equipment Manufacturers Association of AustraliaAustralasian Fire Authorities CouncilAustralian Building Codes BoardAustralian Chamber of Commerce and IndustryAustralian Industry GroupAustralian Institute of Building SurveyorsAustralian Institute of Refrigeration Air Conditioning and HeatingChartered Institution of Building Services EngineersDepartment of Contract and Management Services, W.A.FPA AustraliaInstitute of Refrigeration Heating and Air Conditioning Engineers New ZealandInstitute of Engineers AustraliaPlastics and Chemicals Industries AssociationProperty Council of AustraliaAdditional interests participating in the preparation of this Standard:Department of Human Services (Vic)Department of Human Services (Tas)Institute of Plant Engineers AustralasiaNational Health and Medical Research CouncilNew South Wales Health DepartmentQueensland HealthTelstra Corporation Keeping Standards up-to-date Standards are living documents which reflect progress in science, technology andsystems. To maintain their currency, all Standards are periodically reviewed, andnew editions are published. Between editions, amendments may be issued.Standards may also be withdrawn. It is important that readers assure themselvesthey are using a current Standard, which should include any amendments whichmay have been published since the Standard was purchased.Detailed information about joint Australian/New Zealand Standards can be found byvisiting the Standards Australia web site atwww.standards.com.auor StandardsNew Zealand web site at www.standards.co.nz and looking up the relevant Standardin the on-line catalogue.Alternatively, both organizations publish an annual printed Catalogue with fulldetails of all current Standards. For more frequent listings or notification of revisions, amendments and withdrawals, Standards Australia and Standards NewZealand offer a number of update options. For information about these services,users should contact their respective national Standards organization.We also welcome suggestions for improvement in our Standards, and especiallyencourage readers to notify us immediately of any apparent inaccuracies orambiguities. Please address your comments to the Chief Executive of eitherStandards Australia International or Standards New Zealand at the address shownon the back cover. This Standard was issued in draft form for comment as DR 00101. T h i s i s a f r e e 8 p a g e s a m p l e . A c c e s s t h e f u l l v e r s i o n a t h t t p : / / i n f o s t o r e . s a i g l o b a l . c o m . AS/NZS 3666.1:2002 Australian/New Zealand Standard ™ Air-handling and water systems ofbuildings—Microbial controlPart 1: Design, installation andcommissioning Originated as part of AS 3666—1989.Previous edition AS/NZS 3666.1:1995.Second edition 2002. COPYRIGHT © Standards Australia/Standards New Zealand All rights are reserved. No part of this work may be reproduced or copied in any form or by anymeans, electronic or mechanical, including photocopying, without the written permission of thepublisher.Jointly published by Standards Australia International Ltd, GPO Box 5420, Sydney, NSW 2001and Standards New Zealand, Private Bag 2439, Wellington 6020 ISBN 0 7337 4452 2 T h i s i s a f r e e 8 p a g e s a m p l e . A c c e s s t h e f u l l v e r s i o n a t h t t p : / / i n f o s t o r e . s a i g l o b a l . c o m . AS/NZS 3666.1:2002 2 PREFACE This Standard was prepared by the Joint Standards Australia/Standards New ZealandCommittee ME-062, Ventilation and Airconditioning, to supersede AS/NZS 3666.1:1995.This Standards forms Part 1 of a series of Standards for the microbial control of air-handling and water systems, as follows:AS/NZS3666Air-handling and water systems of buildings—Microbial control3666.1Part 1:Design, installation and commissioning3666.2Part 2:Operation and maintenance3666.3Part 3:Performance-based maintenance of cooling water systems T h i s i s a f r e e 8 p a g e s a m p l e . A c c e s s t h e f u l l v e r s i o n a t h t t p : / / i n f o s t o r e . s a i g l o b a l . c o m .
