Transcript
DSEULTRA STARTING WITH QUALITY.
®
®
SPECIFICATION
DC SUPPLY 8V to 35V continuous CRANKING CRANKIN G DROPOU DROPOUTS TS Able to survive 0V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V. This is achieved without the need for internal batteries.
DSE710 & DSE SE7 720
AUTO AU TO STAR ART T & AU AUTO TO MA MAIN INS S FAI AILU LURE RE CO CONT NTRO ROL L MO MODU DULE LES S
MAXIMUM OPERATING CURREN MAXIMUM CURRENT T 180mA at 12V. 190mA at 24V MAXIMUM ST MAXIMUM STANDBY ANDBY CURRE CURRENT NT 145mA at 12V. 150mA at 24V GENERATOR INPUT RANGE 35V(L-N) to 333V AC (L-N) absolute maximum 50Hz - 60Hz (min 15V AC)
DSE710
AUXILIARY OUTPUTS Solid state 2.4A DC at supply voltage
DSE720
FUEL/START OUTPUTS Solid state 3.4A DC at supply voltage GENERATOR C.T. 5A secondary 0.5VA MAINS (UTI MAINS (UTILITY LITY)) SEN SENSINGINPUT SINGINPUT RANGE (DSE720 only) 35V(L-N) to 333V AC (L-N) 50Hz - 60Hz (min 15V AC) DSE710 & DSE DSE710 DSE720 720 DIM DIMENS ENSION IONS S 209mm x 146mm x 30.3mm 8.2” x 5.7” x 1.2” DSE710 & DSE DSE710 DSE720 720 PANE ANEL L CUTO CUTOUT UT:: 182mm x 137mm 7.2” x 5.4”
The DS The DSE7 E710 10 is an Au Auto toma mati tic c Start Sta rt Con Contr trol ol Mod Module ule tha thatt off offers ers an ad adva vance nced d ra rang nge e of eng engine ine monitoring monit oring and pro protectio tection n featur fea tures es.. Th The e mo modu dule le has be been en design des igned ed to mo monito nitorr gene generat rator or frequency, freque ncy, generat generator or volts, generat gen erator or cur curren rent, t, engi engine ne oil pressure, press ure, engine coolan coolantt temperature tempe rature,, engine running hours hour s and bat batter tery y vol volts. ts. The mo The modu dule le al also so di disp spla lays ys th the e engine eng ine sp speed eed.. Wh When en th the e mo modu dule le dete de tect cts s a fau fault lt co cond ndit itio ion n it automat auto matica ically lly shut shuts s dow down n the engine eng ine and in indi dica cates tes th the e ex exact act fault fau lt on th the e mo modu dules les LC LCD D di disp splay lay or rel relevan evantt LED ind indicat icator or.. The mo The modu dule le can be co confi nfigu gure red d usin us ing g th the e fr fron ontt pa pane nell or vi via a th the e DSE8 DS E810 10 in inte terfa rface ce and a PC PC.. Th The e modu mo dule le ca can n al also so be co cont ntro rolle lled d fro fr om a PC th that at isloc islocat atedup edup to 100 met meters ers awa away. y. The DS The DSE7 E720 20 is an Au Auto toma mati tic c Mains Mai ns Fai Failur lure e Co Contr ntrol ol Mod Module ule and inc incorp orpora orates tes all the feat feature ures s of th the e DS DSE7 E710 10 pl plus us th the e ab abil ilit ity y to automat auto matica ically lly mo monito nitorr the mai mains ns suppl sup ply y and sw swit itch ch ov over er to th the e generat gen erator or whe when n the mai mains ns power pow er fai fails. ls.
FEATURES • PC configurable • Digital and analogue inputs • Digital outputs • Automatic mains (utility) supply monitoring (DSE720 only) • Automatic shutdown or warning when fault conditions are detected • Manual start • Engine pre-heat • Engine monitoring and protection features • Protected Solid State (PSS) outputs • Front panel mounting • Front panel programming • Tamper proof engine hours counter • Remote start • LED indicators • Configurable timers • Configurable outputs • Configurable inputs • Back-lit character/icon LCD display BENEFITS • Transfer between mains (utility) and generator power (DSE720 only) • On-site module configuration and remote configuration (Max 100 Meters) using PC software • User-friendly set-up and button layout • Multiple engine parameters are monitored simultaneously • License free PC software
OPERATION The module is operated using the front STOP/RESET, MANUAL, AUTO, TEST and START push buttons.
An additional push button next to the LCD display is used to scroll through the modules’ metering displays. CONFIGURATION The modules can be configured using the front panel or remotely using the DSE810 interface and a PC.
As well as configuration the DSE810 interface has the ability to provide real time diagnostic facilities.
MAXIMUM PA MAXIMUM PANEL NEL THICKNES THICKNESS S 8mm 0.3”
ENVIRONMENTAL TESTING ENVIRONMENTAL STANDARDS ELECTRO MAGNE ELECTRO MAGNETIC TIC CAPABILIT ABILITY Y BS EN 61000-6-2 EMC Generic Emission Standard for the Industrial Environment BS EN 61000-6-4 EMC Generic Emission Standard for the Industrial Environment ELECTRICAL SAFETY ELECTRICAL BS EN 60950 Safety of Information Technology Equipment, including Electrical Business Equipment TEMPERATURE BS EN 60068-2-2 o Test Ab to +70 C 60067-2-2 Hot o Test Ab to -30 C 60068-2-1 Cold VIBRATION BS EN 60068-2-6 Ten T en sweeps in each of three major axes 5Hz to 8Hz @ +/-7.5mm, 8Hz to 500Hz @ 2gn HUMIDITY BS 2011 part 2.1 60068-2-30 Test T est Cb Ob Cyclic o 93% RH @ 40 C for 48 hours SHOCK BS EN 60068-2-27 Three shocks in each of three major axes 15gn in 11mS
DEEP SEA ELECTRONICS PLC Highfield House Hunmanby Industrial Estate Hunmanby, North Yorkshire YO14 0PH England
TELEPHONE +44 (0)1723 890099
EMAIL
[email protected]
FACSIMILE +44 (0)1723 893303
WEBSITE www.deepseaplc.com
Registered in England & Wales No.01319649
VAT No.316923457
DEEP SEA ELECTRONICS INC 3230 Williams Avenue Rockford IL 61101-2668 USA
TELEPHONE +1 (815) 316 8706
EMAIL
[email protected]
FACSIMILE +1 (815) 316 8708
WEBSITE www.deepseausa.com
®
DSE710 & DSE720 MECHANICAL LOAD
LOAD
INSTRUMENTATION AND ALARMS The DSE710 and DSE720 both provide comprehensive metering and alarm facilities.
DSE720 ONLY
CTs MUST BE 5 AMP SECONDARY
P1
P2
L1 S1
L1
S2
L2
FROM ENERATOR
L2
L3
The table below outlines the module’s capabilities.
L3
FROM MAINS N
N
DSE710/DSE720 2 AMP FUSES
2 AMP FUSES
ELECTRICAL INTERLOCK
Generator Frequency
M
G NORMALLY OPEN
Engine Speed
NORMALLYCLOSED
Generator Volts (L1-N, L2-N, L3-N) Generator Volts (L1-L2, L2-L3, L3-L1) +
+
Generator Current (L1, L2, L3) Engine Oil Pressure Engine Coolant Temperature
18 L1
19
20
21
L2
L3
COM
26 L1
27
9
8
22
23
24
25
N
N E G E S O L C
S N I A
L1
L2
L3
N
GEN VOLTS MODULE 710/720
BATTERY E V -
E V +
1
2
2 AMP FUSE
BATTERY
MAINS
K N A R C
1 T U P T U O
2 T U P T U O
T L A G R H C
E R U S S E R P L I O
7
10
11
P O T S M E
L E U F
3
4
5
6
FUEL SOLENOID
CRANK SOLENOID
RELAY
Hours Run Counter Battery Volts
M E S O L C
P M E T T N A L O O C
12
13
1 T U P N I
2 T U P N I
T R A T S E T O M E R
15
16
14
Mains Volts (DSE720 only) (L1-N, L2-N, L3-N)
17
2 AMP FUSE
WL RELAY
CHARGE ALT
H T R A E E N I G N E O T
BATTERY NEGATIVE MUST BE GROUNDED SCREW TERMINALS TIGHTENING TORQUE = 0.8Nm (7lb-in) * NOTE. ALL THE OUTPUTS ARE SOLID STATE AND ARE POSITIVE SWITCHING
RELATED MATERIALS TITLE DSE710 Manual DSE720 Manual DSE7xx Software Manual
PART NO’S 053-013 053-005 057-002
DEEP SEA ELECTRONICS PLC maintains a policy of continuous development and reserves the right to change the details shown on thisdata sheet withoutprior notice.The contents are intendedfor guidance only.
This data sheet is printed on 9lives 55 Silk, which is produced with 55% recycled fibre from both pre and post-consumer sources, together with 45% virgin ECF fibre. 055-035/02/08 (2)
