Transcript
1. how to activate the MINI DSG Reader on PC. Step 1: Copy the software in the CD, paste them to your local disk. Step 2: Disable all Network Connection, including: the local area connection, wireless network connection and 1394 Connection. Step 3: Open the MINI DSG Reader folder, click “run me first registration entries”, and a windows dialogue popup reading: Registry Editor„, click OK. 2. Step 4: Click icon “DSG Reader” and a windows dialogue popup displaying License expired, click OK, then another one popup showing machine ID, press “ctrl+v” to paste, and click OK. 3. Step 5: Create one txt file in the desktop and into it paste the machine ID, then send it to your seller for activation. 4. Step 6: your seller send back the license file activated, cut it and paste it in to the Mini DSG reader folder. 5. Step 7: right click the green icon “DSG Reader” to open it, then close the appeared screen, and again right click “DSG Reader”-send to-Desktop(create shortcut) Step 8: connect the DSG reader to the computer and the car, then it will popup windows “ found new hardware”, step-to-step to install it. 6. Step 9: click “my computer-device manager”, if you find “USB OBD II cable”, it means the computer and the DSG reader establish Communication. 7. Step 10: Open the “Shotcut to DSGreader” in the desktop. 8. Now, you are ready to start to use DSG reader to read and write latest dual-clutch DSG gearbox data for AUDI and VW.