Transcript
ONLINE AUCTION KS+P Industrietechnik GmbH (AT) Steelwork and mechanical assembly Industriestrasse Arnoldstein (KS+P Insdustrietechnik GmbH) Datum zaključka: torek 02 FEBRUAR začetek 14:00 Pregledovanje: torek 26 januar od 09:00 do 16:00 Industriestrasse Arnoldstein (Austria) torek 02 februar 2010 KS+P Industrietechnik GmbH Special Condition Datum zaključka torek 02 februar 2010 Pregledovanje torek 26 januar od 09:00 do 16:00 KS+P Insdustrietechnik GmbH Industriestrasse Arnoldstein, Austria Podjetje, ki organizira to Online Auction TROOSTWIJK GMBH Hockegasse Wien, Austria Telefon: +43 (0) Faks: +43 (0) Elektronska pošta: Pribitek % DDV % Zbirka od ponedeljek 08 februar 09:00 do petek 12 februar 16:00 KS+P Insdustrietechnik GmbH Industriestrasse Arnoldstein, Austria Collection details The buyer is fully responsible for the dismantling, loading and transportation of the bought lots. Troostwijk GmbH cannot accept any responsibility unless indicated otherwise. The collection/pick-up will only take place on the mentioned delivery date/time and address. If the collection of the goods happens later, the customer is responsible for the costs (hire, extra costs) Information VAT 20 % All foreign buyers from countries belonging to the European Community must inform us of their VAT NUMBER. If a buyer does not furnish this proof, the auctioneer has to charge the legal Austrian VAT. This VAT amount cannot be refunded. Payment Mark-up Prolongation Combination Terms and Conditions of Sale Contact Foreign buyers from countries not belonging to the European Community have to pay the legal Austrian VAT as deposit to the auctioneer. After receipt of the original export documents, which must be stamped officially to prove that the export has taken place, the auctioneer will refund the paid Austrian VAT. Payments have to be effected to Troostwijk GmbH, Vienna; Bank Austria Creditanstalt, Vienna; Konto Nr /00; BIC: BKAUATWW; IBAN: AT % over the highest bid If a bid is made in the last 10 minutes before the lot closes, the closing time of that lot will be extended with 5 minutes until no bids are made. All lots in a combination will be sold individually first. After the last lot is sold, the total of bids is raised 10%. This is the starting bid of the combination. If the combination is sold it overrules the individual bids, if not the individual bids are applicable. On the auction the general terms and conditions of the online auction are applicable concerning the (possible) purchase of moveable assets, furthermore these specific terms and conditions. Tel. +43 (0) / Fax. +43 (0) ; 1 1 CNC double spindle lathe ,00 Okuma, LT 15 M, year built 2000, serijska številka 0171, CNC double spindle lathe, 7 axes, swing diameter x, lengts max. 210x200mm, mm, swing diameter over the bed 550mm, swing diameter over the carriage ca. 480mm, tip distance mm, traverse path xa/xb 230 mm, za=460 mm, zb=900 mm, zc=460 mm, c (spindle rotation) = 360, drive rpm, 2 revolver, type multi functional V 12, for powered tools, with chip conveyor, CNC OSP-U 100 L control and 21 tool holders with cutting tools 3 1 Cycle lathe 7.000,00 Seiger, SLZ 570, year built 1999, serijska številka , Cycle lathe, tip amplitude 1500 mm, swing diameter over bed 560mm, swing diameter over valve plate 340 mm, spindle head size 6, spindle diameter 100 mm, spindle drill 63 mm, drive range rpm, with multifix C quick clamp, three jaw chuck, diameter 250mm, 2 bezel, Heidenhain digital control and equipment 4 1 CNC lathe 5.500,00 Voest Alpine, WNC500 S x 1600, year built 1988, serijska številka /01, CNC lathe, tip amplitude 1600mm, turning length max mm, swing diameter max. 380 mm, swing diameter over bed 540 mm, swing diameter over cross slide 450 mm, support interpass 800 mm, planpass 305 mm, spindle head size 8, spindle drive rpm, spindle drill 77 mm, through hole 65 mm, chuck, type 3 KTNCV Z11- F315, 12-time diskrevolver, with chip conveyor and Siemens Sinumerik 810 T control 5 1 CNC lathe 5.500,00 Voest Alpine, WNC 300 S, year built 1990, serijska številka , CNC lathe, 2 axes, tip amplitude/turning langth max. 1120mm, swing diameter max. 300mm, traverse path longitudinal carriage/plan carriage, 1240 mm/220 mm, swing diameter over bed 470 mm, swing diameter over carriage 345mm, spindle head size 6, drive max rpm, spindle drill 77 mm, draw tube drill 65 mm, collet chuck diameter max. 250 mm, 12-time diskrevovler, with chip conveyor and Simens Sinumerik 810 T control 6 1 Lead- and drawing spindle lathe 400,00 Colchester, Mascot 1600, Lead- and drawing spindle lathe, swing diameter ca. 460 mm, turning length 1600 mm, admission 78 mm, drive rpm, defect 7 1 CNC vertical mill- and drillcenter 4.000,00 Heckler & Koch, BA 33 CNC, year built 1988, serijska številka , CNC vertical milland drillcenter, traverse path x,y,z 880x400x400x mm, 2 working places (right and left), clambing area 1200x500 mm, table load max. 400 kg, distance tableplate-spindle nose 600mm, tool magazine 2x 12 places, tool holder SK 40, spindle drive rpm, with chip conveyor, paper band filter and HK CNC control 8 1 CNC milling machine 6.000,00 Maho, MH 600 C, year built 1992, serijska številka , CNC milling machine, traverse path x,y,z 600x450x360 mm, tool holder ISO 40, drive rpm, table dim. 650x530 mm, with four-jaw-chuck, diameter 375mm, tool magazine 30 places, with CNC control and Philips hand console 9 1 milling machine 1.000,00 Sachman, Arimos 101, serijska številka , milling machine, traverse path x,y,z, ca. 1200x560x600 mm, table dimension 1600x560 mm, with magnet backing plate, dim. 600x300 mm, operate console and Olivetti digital x,y,z display 10 1 milling machine 800,00 TOS, FV 20, serijska številka , milling machine, traverse path x,y,z, 900x300x410 mm, tool holder SK 50, table dim. 1400x340 mm, drive rpm, with digital x,y,z display and machine vice, chuck jaw width 160 mm 11 1 CNC mill- and drill machine ,00 Lazzati, HP 2 T, year built 1990, serijska številka 266, CNC mill- and drill machine with birotative head, woring area x,y,z 3000x1500x900 mm, W-axe axial action of th birotative head 1000 mm, table B-axe, dim. 1300x1800mm, table load max. 5 t, birotative head 2- axes can be positioned over the M-function, V-axe 360, U-axe 275, drive rpm, spindle holder ISO 50, tool magazine, type CUD (barrel achievement), 30 places, with chip conveyor and Selca CNC-control 12 1 radial drilling machine 1.000,00 TOS, VR 6, radial drilling machine, spindle diameter 90mm, holder conus MK 5, drill diameter max. in steel 90 mm, projection ca mm, table dim. ca. 1800x900 mm, with clamping table, dim. 750x600x540 mm and workbench 13 1 pillar drilling machine Solberga, GM 1735, serijska številka , pillar drilling machine, projection 300 mm, table dim. ca. 550x450mm, drive rpm 14 1 Pillar drilling machine Spiral, Pillar drilling machine, projection 300 mm, table dim. 650x450mm, drilling depth 160 mm, drive rpm 15 1 pillar drilling machine Ibarmia, A-50, serijska številka 499-G, pillar drilling machine, projection 350 mm, table dim. 500x500 mm, drilling depth 230mm, drive rpm, with tool wagon 16 1 table drilling machine with rack Tibomat, table drilling machine with rack 17 1 NC band-saw machine Missler, DEB 420, year built 1990, serijska številka 16103, NC band-saw machine, cutting area 420x420 mm, power 8,8 kw, total power 10,6 kw, saw-band dim. 6200x50x1,3 mm, cutting speed m/min., with compucut V2 NC-control and roll conveyor, dim. 600x3000 mm 18 1 metal circular saw Kaltenbach, HDM 750, serijska številka 8691, metal circular saw, sawing blade diameter 700mm, defect 19 1 sawing blade grinding machine Risstaler, R 200, year built 1974, serijska številka 510, sawing blade grinding machine 20 1 band sawing machine Forte, band sawing machine with work bench 21 1 shop-press O.M.C.N., 158, shop-press, cap. 50 t, daylight 760 mm, stamp diameter 60 mm 22 1 hydraulic press serijska številka 002/98, hydraulic press, with built on slewing crane, year built 1998, projection 5 m, lift height 2,7 m, with E-chain-tension, cap. 500 kg, year built combine plain-, shape-, and bar steel scissors Peddinghaus, 21.0AD/Super 16, serijska številka 502A062, combine plain-, shape-, and bar steel scissors with notching tool and hole punch 24 1 circular grinder WMW, SU 315x1500, year built 1972, serijska številka 7360, circular grinder, external diameter max. 500 mm, internal diameter max. 16 mm, length during external grinding max mm 25 1 vertical shaping machine MAS/Kovosvit, HOV 25, serijska številka , vertical shaping machine for wedge angles and plenty wedge cogging, table dim. 500mm, workpart height max. 300 mm shaping height max. 200 mm 26 1 double grinder bench Moringer, VS 64 Variospeed 4000 E, serijska številka , double grinder bench, drive max rpm 27 1 double grinder bench Nebes, double grinder bench, electrical connection 380 V, disk diameter 180 mm 28 1 double grinder bench Nebes, double grinder bench, defect 29 1 trimming machine trimming machine, length 500 mm 30 1 press brake Voest Alpine, BAH 200/3, serijska številka 026, press brake, working width 3000 mm, bonding pressure 200 t, lift max 20 mm, for press and bending work of blank sheets 1-12 mm, material St52, with equipment 31 1 crank plate shear WMW, SCTO, serijska številka 534/55/59, crank plate shear, built size 2500x125, cutting ,00 300,00 300,00 500,00 600, ,00 800, , ,00 length 2500 mm, blank sheet gauge max. 12,5 mm, crank lift 140 mm, share force 60 t roll bending machine Q, 3-roll bending machine, cap. 2000x15 mm, roll diameter ca. 25 mm 33 1 CNC coordinate flame cutting machine Messer Griesheim, CORTA P3600, year built 1989, serijska številka , CNC coordinate flame cutting machine, 2 burner, cutting of blank sheets up to 300 mm, size 2x6 m, with gap engrave automatic up to 130 mm, plasma cut up to 25 mm, track total length 8800 mm, width 3600 mm, with cutting table, dim. 2600x6000 mm and KS 20 A control 34 1 universal tool setter Messma-Kelch-Robot, 351 EA 6 logo, year built 1990, serijska številka 2784, universal tool setter, roll-axis 420 mm, cross axis 420 mm, with round table, diameter 700 mm, projector with digital cotroller 35 6 VDI tool holder 36 6 VDI tool holder 37 6 VDI tool holder 38 6 VDI tool holder 39 6 VDI tool holder 40 5 VDI tool holder 41 3 powered tool holder powered tool holder, piston diameter 40 mm and 1 lot collet chuck 42 6 powered tool holder powered tool holder, n=max rpm, piston diameter 40 mm 43 6 VDI tool holder 44 6 VDI tool holder 45 6 VDI tool holder 46 6 VDI tool holder 47 6 VDI tool holder 48 6 VDI tool holder 49 6 VDI tool holder 50 6 VDI tool holder 51 5 VDI tool holder 52 5 VDI tool holder 53 4 VDI tool holder tool holder tool holder, SK 50, with wagon 61 1 analog 3-D-feeler , analog 3-D-feeler, with SK 50 clamp and 1 SK 50 tool holder with dial gauge holder 2.500, ,00 800,00 70, ,00 70,00 60,00 3 62 13 tool holder 1 tool holder, SK 50, 1 drill chuck 63 5 tool holder tool holder, SK 50 and 15 holder tool holder tool holder, SK tool holder tool holder, SK tool holder tool holder, SK tool holder tool holder, SK boring head with holder boring head with holder, diameter mm 69 1 boring head with holder boring head with holder, diameter mm 70 1 boring head with holder boring head with holder, diameter mm 71 2 boring head with holder boring heads with holder, diameter mm, mm 72 4 tool holder tool holder, SK 50, with boring tool 73 6 holder with tools Walter, B 2121 M, holder with tools 74 6 holder with tools Walter, B 2121 M, holder with tools boring tools boring tools, with comet holder, diameter 27,5 mm 76 1 lot with tool holder application 1 Komet, lot with tool holder application, diameter 27,5 mm and various, among other things like mill extension 1 Walter, extension A 101 M tool holder 170,00 tool holder, SK 40 and various applications in rack tool holder tool holder, SK lot with tool holder lot with tool holder, SK 40 and applications 81 1 kit Holex change applications kit Holex change applications, 6-16 mm 82 1 lot Bilz change applications lot Bilz change applications, 1 lot mills and collet chucks, 2-doors 83 1 assembly block Kelch, assembly block, SK assembly block Kelch, assembly block, SK T-slot table 400,00 T-slot table, dim. 2800x1200 mm 86 1 machine vice machine vice, jaw width 200 mm 87 1 machine vice machine vice, jaw width 160 mm 88 1 machine vice 70,00 machine vice, jaw width 155 mm 89 1 dividing apparatus Meca, dividing apparatus, with three jaw chuck, diameter 250 mm 90 1 dividing apparatus dividing apparatus, with three jaw chuck, diameter 160 mm 91 1 four jaw chuck four jaw chuck, diameter 405 mm 92 3 three jaw chuck three jaw chuck, diameter 310 mm, 250 mm, 225 mm, various holders on 1 pallet 93 2 angle plate angle plate, dim. (wxhxd) 670x1500x800 mm 94 2 angle plate angle plate, dim. (wxhxd) 490x800x490 mm 95 1 angle plate angle plate, dim. (wxhxd) 320x800x500 mm 96 1 lot twist drill lot twist drill, up to ca. 54 mm, in 3 drawers 97 1 lot with end mill cutter lot with end mill cutter, screwplate and broach, in 5 drawers 98 1 tool closet tool closet, dim. ca. 760x700x1100 mm, 12 drawers 99 1 lot with screwplate lot with screwplate, counterbore, in 5 drawers lot VHM driller lot VHM driller, end mill cutter, in 4 drawers lot with twist driller lot with twist driller, reamer, in 5 drawers tool closet tool closet, dim. 1500x500x910 mm, in 18 drawers lot with knife holder and various lot with knife holder and various, with tool closet, dim. 710x470x1000 mm, 7 drawers lot with cutting inserts lot with cutting inserts, inserts, in 5 drawers lot screw barrel plug, drill chuck and various lot screw barrel plug, drill chuck and various, with tool closet, dim. 710x470x1000mm, 7 drawers lot with cutting inserts/inserts lot with cutting inserts/inserts, among other things for A-thread, I-thread and mills, in 7 drawers lot roll- and side milling cutter lot roll- and side milling cutter, broach, in 2 drawers, with tool closet, dim. 710x530x1000 mm, in 9 drawers lot with driller lot with driller, end mill cutter and various, with tool closet, dim. 710x530x1000 mm, 9 drawers lot with driller lot with driller, inserts, with tool closet, dim. 710x470x1000 mm lot with jaws and various lot with jaws and various, with tool closet, dim. 710x470x1000 mm, 7 drawers lot with screwplate lot with screwplate, 1 reamer, 2 knife holder, inserts and various lot with various actuator and jaws lot with various actuator and jaws lot with clamping material and various lot with clamping material and various, with rack and working bench, with vice, dim. 1300x800 mm lot with jaws with steel sheet closet lot with jaws with steel sheet closet, dim. 900x400x1950 mm 200, 115 1 lot with fittings and various lot with fittings and various, with steel sheet closet machine vice machine vice, jaw width 160 mm calliper-kit calliper-kit, mm, 47-units three point inside micrometre three point inside micrometre, 6-20 mm three point inside micrometre three point inside micrometre, mm three point inside micrometre three point inside micrometre, mm, mm kit Bowers three point inside micrometres kit Bowers three point inside micrometres, 5 pieces, mm kit of three point inside micrometres kit of three point inside micrometres, 4 pieces mm digital three point inside micrometre digital three point inside micrometre, mm three point inside micrometre three point inside micrometre, mm, mm three point inside micrometre Bowers, three point inside micrometre, mm three point inside micrometre three point inside micrometre, mm kit Mitutoyo outside micormetres kit Mitutoyo outside micormetres, 6 pieces, mm outside micormetres Mitutoyo, outside micormetres, 1x mm, 2x mm outside micormetre outside micormetre, mm outside micormetres Mitutoyo, outside micormetres, , mm digital outside micormetres Mitutoyo, digital outside micormetres, 0-75 mm outside micormetres outside micormetres, mm outside micormetres outside micormetres, mm, mm various outside micormetres various outside micormetres various outside micormetres various outside micormetres outside micormetres outside micormetres, 2x 25-50mm, 2x mm digital calliper Mitutoyo, digital calliper, length 1000 mm digital calliper Mitutoyo, digital calliper, length 500 mm digital calliper Holex, digital calliper, length 500 mm digital calliper digital calliper, length ca. 300 mm calliper calliper, length 2000 mm calliper calliper, length 1000 mm 70,00 60,00 60,00 60,00 156 2 calliper 60,00 calliper, length 650 mm, 500 mm calliper calliper, length 700 mm, 500 mm calliper calliper, length 300 mm calliper calliper, length 300 mm calliper calliper, length 300 mm calliper calliper, length 150 mm, with dial gauge digital calliper digital calliper, partially with allowance variation angle angle, as good as new, 400x265 mm, 200x130 mm, 150x100 mm, 100x70 mm dial gauges dial gauges, DIN 878 and 1 magnet measuring stand, as good as new dial gauges dial gauges, DIN 878 and 1 magnet measuring stand, as good as new analog 3-d-feeler Garant, , analog 3-d-feeler, waterproof feeling applications Garant 1 feeling applications Garant , 5x art. no , 7x , short 4 mm surface roughness tester Mitutoyo, SJ-201 P, surface roughness tester,as good as new surftest 211 Mitutoyo, surftest depth micrometer depth micrometer, with slat internal measuring salt kit internal measuring salt kit and 1 micrometre screw depth gauge depth gauge, length up to 250mm, lot with angle lot with angle, straightedge and various lot with varous measuring equipment lot with varous measuring equipment, among other things like 5 outside micrometres, 2 dial gauges, 1 thread measuring kit, 1 cleat measuring calliper granite surface plate Novalit, granite surface plate, dim. 630x400x70 mm, with marking plate and racks granite surface plate granite surface plate, dim. 1600x1000x165mm lot with thread rings lot with thread rings and plug thread gauge angle 200,00 angle, among other things like 250x160 mm, 150x100 mm, 500x250 mm, as good as new gauging ring gauging ring, diameter 191 mm air level air level inert gas welding apparatus 2.200,00 Fronius, Trans Puls Synergic 5000, serijska številka , inert gas welding apparatus, cap. 500 A, digital control, with wire feed, type TR inert gas welding apparatus 2.000,00 Fronius, Trans Puls Synergic 5000, serijska številka , inert gas welding apparatus, cap. 500 A, digital control, with wire feed, type TR inert gas welding apparatus Fronius, Trans Puls Synergic 5000, serijska številka , inert gas welding apparatus, cap. 500 A, digital control, with wire feed, type TR inert gas welding apparatus Fronius, Trans Puls Synergic 5000, serijska številka , inert gas welding apparatus, cap. 500 A, digital control, with wire feed, type TR inert gas welding apparatus Fronius, Time 5000 Digital, serijska številka , inert gas welding apparatus, cap. 500 A, digital control, with wire feed, type TR 4004 Time inert gas welding apparatus Fronius, Vario Synergic 3400, serijska številka , inert gas welding apparatus, cap. 380 A inert gas welding apparatus Fronius, Vario Synergic 3400, serijska številka , inert gas welding apparatus, cap. 380 A inert gas welding apparatus Fronius, Vario Synergic 3400, serijska številka , inert gas welding apparatus, cap. 380 A inert gas welding apparatus Fronius, Vario Star 457, serijska številka , inert gas welding apparatus, cap. 380 A inert gas welding apparatus Fronius, Time Synergic, serijska številka , inert gas welding apparatus, cap. 450 A, with wire feed, Time inert gas welding apparatus Fronius, Time Synergic TPS 450, serijska številka , inert gas welding apparatus, cap. 450 A, with wire feed inert gas welding apparatus Fronius, Time Synergic TPS 450, serijska številka , inert gas welding apparatus, cap. 450 A, with wire feed inert gas welding apparatus Fronius, TransArc 500, inert gas welding apparatus, cap. 500 A, with wire feed, type VR inert gas welding apparatus Fronius,
