Preview only show first 10 pages with watermark. For full document please download

Switches - Siemens

Rating
Date

January 2018
Size

2.5MB
Views

9,436
Categories

computers & electronics computers PC/workstation barebones

Transcript

Switches Safety and Disconnect Switches Contents Pages Contents Pages Heavy Duty Safety Switches Disconnect Switches Safety Switch Features . . . . . . . . . . . . . . . . . . . . . . . .18/2 Selection, 240V Fusible . . . . . . . . . . . . . . . . . . . . . . . .18/3 Selection, 600V Fusible . . . . . . . . . . . . . . . . . . . . . . . .18/4 Selection, 600V Non-Fusible . . . . . . . . . . . . . . . . . . . .18/5 Selection Window Switches . . . . . . . . . . . . . . . . . . . .18/6 Selection 4 & 6 Pole Switches . . . . . . . . . . . . . . . . . . .18/7 Selection Receptacle Switches . . . . . . . . . . . . . . . . . . .18/8 Selection Non-Metallic & 316 Grade Stainless Steel Switches . . . . . . . . . . . . . . . . . . . . . . . .18/9 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .18/10–18/13 Enclosed Rotary Switches . . . . . . . . . . . . . . .18/14–18/15 Compact UL508 Non-Fusible . . . . . . . . . . . . .18/16–18/19 Type VBII UL98 Fusible . . . . . . . . . . . . . . . . . .18/20–18/24 Type MCS UL98 Fusible . . . . . . . . . . . . . . . . .18/25–18/26 Compact Fusible Type CFS . . . . . . . . . . . . . . .18/27–18/30 Heavy Duty Safety Switch Standards and Ratings Standards Fuse Provisions supplied in fusible switches ▪ UL98 approved per file #E4776 ▪ Suitable for use as service entrance equipment (where applicable) ▪ Meets NEMA standard KS-1-1990 for Type HD switches ▪ Seismic qualification – all switches have been tested and comply with the 2007 California Building Code CBC (Zone 4) ▪ 30 & 60A 240V – Class H standard, Class R with kit ▪ 100-600A 240V – Class H standard, Class J by moving load base, Class R with kit ▪ 30-600A 600V - Class H standard, Class J by moving load base, Class R with kit ▪ 100 & 200A - Class T with kit ▪ 400 & 600A - Class H standard, Class J & T by moving load base, Class R with kit ▪ 800A – Class L standard, Class T by moving load base ▪ 1200A – Class L standard, Class T with kit (240V max) Ratings 30-1200A, 240V and 600V AC and DC 2, 3, 4 and 6 pole fusible and non-fusible All HD safety switches are both HP and load break rated Enclosures are available to meet NEMA 1, 3R, 12 & 4/4X requirements ▪ Short Circuit ratings ▪ ▪ ▪ ▪ Fusible switches (and non-fusible when protected by fuses) ▪ 30-600A – 10,000 AIC with Class H fuses ▪ 30-600A – 200,000 AIC with Class R, J or T fuses ▪ 800 & 1200A – 200,000 AIC with Class L or T fuse Non-fusible switches when protected by a circuit breaker Switch Ampere Rating Breaker Frame UL Listed Short Circuit Rating 30-1200A All UL listed circuit breakers 10,000 AIC thru 600 VAC 30-100A NEB, NEG, NGG, NBG & ED4 18,000 AIC thru 480 VAC 30-100A ED6 18,000 AIC thru 600 VAC 200A FD6-A & JD6-A 18,000 AIC thru 600 VAC 400A JD6-A & LD6-A 18,000 AIC thru 600 VAC 600A LD6-A 25,000 AIC thru 600 VAC 1200A NNG 25,000 AIC thru 600 VAC Siemens Industry, Inc. Industrial Controls Catalog 18/1 Switches Heavy Duty Safety Switches Features 15 3 20 2 17 11 16 9 4 1 5 18 6 13 19 8 14 12 1. Quick-make, quick-break operating mechanism that ensures positive operation. 7 2. Visible blade, double-break switching action. 3. Arc chutes dissipate heat and prolong switch life. 13. Spring reinforced fuse clips that assure reliable contact for cool operation. 4. Highly visible red handle grip. Designed for hook stick operation. 14. Door latch securely holds door closed and allows cover padlocking. 5. Defeatable dual cover interlock. 15. Front removable mechanical lugs that are suitable for CU/AI 60 or 75° C conductors. 6. Center punch provided for field drilling to allow ON padlocking. 10 7. Handle can be padlocked in the OFF position with up to (3) padlocks with 5/16” hasps. 8. Generous top, bottom and side gutters that meet or exceed NEC wire-bending space requirements. 18/2 12. Unique enclosure design increases rigidity and prevents cuts and scrapes to conductors and installer’s hands. 16. Lugs are field convertible to copper body and to a wide variety of compression connectors. 17. Hinged clear line terminal shield with probe holes for inspecting or testing line side terminals. 9. Informative door labeling which includes replacement parts list. 18. Embossed aluminum nameplate on Heavy Duty Switches provides highly visible ON/OFF indication. 10. Tangential knockouts through 600A for easy conduit lineup. 19. Drawn cover for increased rigidity and resistance to abuse. 11. Side-hinged door that opens past 180 degrees for easier wiring. 20. Top key hole and bottom mounting holes provide easy 2 or 3 point mounting. Siemens Industry, Inc. Industrial Controls Catalog Switches Heavy Duty Safety Switches Selection Horsepower Ratings Indoor — Type 1 System Ampere Rating Catalog Number List Price $ Outdoor — Type 3R Ship Wt.* Catalog Std. Pkg. Number List Price $ 240V AC 1 Phase, Ship Wt.* 2 Wire Std. Pkg. Std. Max. 2 Phase, 4 Wire 3 Phase, 3 Wire Std. Std. Max. Max. 250 Volt DC 240 Volt Fusible 2-Pole, 2-Fuse, and Solid Neutral 0030 0060 0100 0200 0400 0400 0600 0600 800 1200 3-Pole, 3-Fuse, and Solid Neutral 0030 0060 0100 0200 0400 0400 0600 0600 0800 1200 (Also used for 2-Pole, 2-Wire Applications) HF221N HF222N HF223N HF224N HF225NH HF225N HF226NH HF226N HF227N HF228N ■ 012 018 023 047 129 153 133 155 365 385 HF221NR HF222NR HF223NR HF224NR HF225NRH HF225NR HF226NRH HF226NR HF227NR HF228NR ■ 013 019 024 048 131 157 135 159 365 385 011⁄2 03 071⁄2 15 15 15 15 15 — — 240 Volt AC/250 Volt DC 03 10 15 — — — — — — — — — — — — — — — — — 011⁄2 03 071⁄2 15 15 15 15 15 — — 03 10 15 — — — — — — — — — — — — — — — — — 011⁄2 03 071⁄2 15 03 10 15 — — — — — (Also used for 3-Pole, 3-Wire Applications) HF321N HF322N HF323N HF324N HF325NH HF325N HF326NH HF326N HF327N HF328N 014 019 025 049 137 158 139 161 375 395 HF321NR HF322NR HF323NR HF324NR HF325NRH HF325NR HF326NRH HF326NR HF327NR HF328NR 015 020 026 050 138 162 142 165 375 388 — — — — — — — — — — 003 0071⁄2 015 025 050 050 075 075 100 100 0071⁄2 015 030 060 125 125 200 200 250 250 05 10 20 40 50 50 50 50 50 50 240 Volt AC/250 Volt DC — — — — — — — — — — 003 0071⁄2 015 025 050 050 075 075 100 100 0071⁄2 015 030 060 125 125 200 200 250 250 05 10 20 40 50 50 50 50 50 50 240 Volt Fusible 2-Pole, 2-Fuse 0030 0060 0100 0200 3-Pole, 3-Fuse 0030 0060 0100 0200 400 600 800 Type 4/4X Stainless Type 12 Industrial HF221S HF222S HF223S HF224S HF221J HF222J HF223J HF224J 013 019 024 048 240 Volt AC/250 Volt DC — — — — 003 0071⁄2 015 025 0071⁄2 015 030 060 05 10 20 40 (Also used for 2-Pole, 2-Wire Applications in 400–800A Ratings) 240 Volt AC/250 Volt DC HF321S HF322S HF323S HF324S HF325S HF326S HF327S ■ ■ Built to order. Allow 2–3 weeks for delivery. * In pounds (lbs). Height reduced switch (45.25 rather than 56 inches in height) for use with 500MCM or smaller conductors. Siemens Industry, Inc. Industrial Controls Catalog 013 019 024 048 014 020 025 049 154 157 370 HF321J HF322J HF323J HF324J HF325J■ HF326J■ HF327J■ 014 020 025 049 110 161 365 Dual horsepower ratings: Std.- applies when non-time delay fuses are installed. Max.- applies when timedelay fuses are installed. These switches are UL-listed for application on grounded B-phase systems and are suitable for 3-phase motor applications. Product Category: HDSS 011⁄2 3 071⁄2 15 15 15 — 3 10 15 — — — — — — — — — — — — — — — — — — 003 0071⁄2 015 025 50 75 100 0071⁄2 015 030 060 125 200 250 — 10 20 40 50 50 50 When a neutral is required use a field installed neutral kit. Suitable for use as service entrance equipment. Also rated Type 3S/3R. 304 grade stainless steel. See page 18/9 for switches with enclosures constructed from 316 grade stainless steel. 18/3 Switches Heavy Duty Safety Switches Selection Horsepower Ratings Indoor — Type 1 System Ampere Rating Catalog Number List Price $ Outdoor — Type 3R Ship Wt.* Catalog Std. Pkg. Number List Price $ 480V AC 600V AC 1 Phase, Ship Wt.* 2 Wire Std. Pkg. Std. Max. 3 Phase, 3 Wire 1 Phase, 2 Wire 3 Phase, 3 Wire Std. Std. Std. Max. Max. 250 600 Volt Volt Max. DC DC 600 Volt Fusible 2-Pole, 2-Fuse 0030 0060 0100 0400 0600 480 Volt AC/600 Volt AC/600 Volt DC HF261 HF262 HF263 HF265■ HF266■ 015 020 026 149 150 HF261R HF262R HF263R HF265R ■ HF266R ■ 015 020 027 152 155 03 05 10 — — 071⁄2 20 30 50 50 HF361R HF361R L HF362R HF362RL HF363R HF364R HF365R H HF365R HF366R H HF366R HF367R HF368R 015 020 020 025 025 049 137 157 141 161 365 385 333 3 5 5 5 25 — — — — — — 071⁄2 071⁄2 20 20 20 50 — — — — — — HF361 HF361L HF362 — HF363 HF364 HF365H HF365 HF366H HF366 HF367 HF368 14 19 19 — 24 48 136 154 138 157 365 383 — HF361NR HF362NR HF363NR HF364NR HF365NR HF366NR HF367NR HF368NR 015 020 026 050 162 165 375 388 03 05 10 25 — — — — 07 ⁄2 20 30 50 — — — — 03 10 15 50 50 10 25 40 — — — — — — — — — — — — 05 10 20 40 50 15 30 50 50 50 HF361N HF362N HF363N HF364N HF365N HF366N HF367N HF368N 005 005 015 015 025 050 100 100 150 150 200 200 015 015 030 030 060 125 250 250 400 400 500 500 03 03 10 10 15 30 — — — — — — 10 10 25 25 40 50 — — — — — — 0071⁄2 0071⁄2 015 015 030 060 125 125 200 200 250 250 020 020 050 050 075 150 350 350 500 500 500 500 05 05 10 10 20 40 50 50 50 50 50 50 — — 30 30 50 50 — — — — — — 480 Volt AC/600 Volt AC/250 Volt DC 3-Pole, 3-Fuse and Solid Neutral 0030 0060 0100 0200 0400 0600 0800 1200 — — — — — 480 Volt AC/600 Volt AC/250 Volt DC 3-Pole, 3-Fuse 0030 0030 0060 0060 0100 0200 0400 0400 0600 0600 0800 1200 — — — — — 014 019 025 049 158 161 375 395 1 005 015 025 050 100 150 250 250 015 030 060 125 250 400 500 500 03 10 15 30 — — — — 10 25 40 50 — — — — 0071⁄2 015 030 060 125 200 250 250 020 050 075 150 350 500 500 500 05 10 20 40 50 50 50 50 — 30 50 50 — — — — 600 Volt Fusible (For 2-Pole Applications use outside poles of 3-Pole Switches) 2-Pole, 2-Fuse 0030 0060 0100 0400 0600 480 Volt AC/600 Volt AC/600 Volt DC Type 4/4X Stainless HF261S HF262S HF263S■ HF265S■ HF266S■ HF361S HF362S HF363S HF364S HF365S HF366S HF367S HF368S■ 015 020 027 153 156 Type 12 Industrial HF261J■ HF262J■ HF263J■ HF265J■ HF266J■ 015 020 027 155 156 03 05 10 — — 071⁄2 20 30 50 50 013 020 025 049 158 161 370 388 HF361J HF362J HF363J HF364J HF365J HF366J HF367J ■ HF368J ■ 014 020 025 049 160 161 365 388 — — — — — — — — — — — — — — — — ■ Built to order. Allow 2–3 weeks for delivery. * In pounds (lbs). 60-200A 3-Pole switches are also rated 600V DC. Height reduced switch (45.25 rather than 56 inches in height) for use with 500MCM or smaller conductors. Use 3-Pole switch for 200A applications. 18/4 — — — — — 03 10 15 50 50 10 25 40 — — — — — — — — — — — — 05 10 20 40 50 15 30 50 50 50 480 Volt AC/600 Volt AC/250 Volt DC 3-Pole, 3-Fuse 0030 0060 0100 0200 0400 0600 0800 01200 — — — — — Dual horsepower ratings: Std.- applies when non-time delay fuses are installed. Max.- applies when timedelay fuses are installed. Suitable for use as service entrance equipment except for 1200 when used on 480 or 600V grounded wye system. Also rated Type 3S/3R. Product Category: HDSS 005 015 025 050 100 150 200 250 015 030 060 125 250 400 500 500 — — — — — — — — — — — — — — — — 0071⁄2 015 030 060 125 200 250 250 020 050 075 150 350 500 500 500 05 10 20 40 50 50 50 50 — 30 50 50 — — — — Indicates oversized enclosure (30A switch with 60A lugs in a 60A enclosure or 60A switch with 100A lugs in a 100A enclosure). 600V DC & 600V DC horsepower rating shown requires (2) poles to be connected in series. 304 grade stainless steel. For switches with enclosures constructed from 316 grade stainless steel see page 18/9. Siemens Industry, Inc. Industrial Controls Catalog Switches Heavy Duty Safety Switches Selection Indoor - Type 1 Ampere Catalog Rating Number System Ship. Wgt. Outdoor - Type 3R List Catalog Price $ Number Ship. List Wgt. Price $ Horsepower Ratings 240 Volt 480 Volt 1-Phase 3-Phase 1-Phase 600 Volt 250V 3-Phase 1-Phase 3-Phase DC 600V DC 600 Volt Non-Fusible 2-Pole 480 Volt AC / 600 Volt AC / 600 Volt DC 30 60 100 400 600 HNF261 HNF262 HNF263 HNF265■ HNF266■ 12 19 24 109 111 HNF261R HNF262R HNF263R HNF265R HNF266R■ 12 — 11 18 — 23 46 114 116 295 305 HNF361R HNF361RL HNF362RH HNF362R HNF362RL HNF363R HNF364R HNF365R HNF366R HNF367R HNF368R 13 20 25 113 115 — — — 15 15 — — — — — 7 1/2 20 30 50 50 3-Pole — — — — — 10 25 40 50 50 — — — — — 5 10 20 40 50 15 30 50 50 50 480 Volt AC / 600 Volt AC / 250 Volt DC 30 30 60 60 60 100 200 400 600 800 1200 HNF361 — HNF362H HNF362 — HNF363 HNF364 HNF365 HNF366 HNF367 HNF368 — — 13 19 11 19 24 24 47 118 120 295 307 5 5 10 10 10 15 15 15 15 15 15 10 10 20 20 20 40 60 125 200 250 250 7 1/2 7 1/2 20 20 20 30 50 50 50 50 50 20 20 50 50 50 75 125 250 400 500 500 10 10 20 25 25 40 50 50 50 50 50 30 30 40 60 60 100 150 350 500 500 500 5 5 10 10 10 20 40 50 50 50 50 — — — 30 30 50 50 — — — — 600 Volt Non-Fusible 2-Pole 480 Volt AC / 600 Volt AC / 600 Volt DC 30 60 100 400 600 Type 4 / 4X Stainless HNF261S 13 HNF262S 20 HNF263S■ 25 HNF265S■ 113 HNF266S■ 115 Type 12 Industrial HNF261J 13 HNF262J 20 HNF263J■ 25 HNF265J■ 114 HNF266J■ 120 — — — 15 15 — — — — — 7 1/2 20 30 50 50 3-Pole — — — — — 10 25 40 — — — — — — — 5 10 20 40 50 15 30 50 50 50 480 Volt AC / 600 Volt AC / 250 Volt DC 30 60 60 100 200 400 600 800 1200 HNF361S HNF362SH HNF362S HNF363S HNF364S HNF365S HNF366S HNF367S HNF368S 13 15 19 24 47 118 120 295 310 ■ Built to order. Allow 2–3 weeks for delivery. Also rated 600V DC. Compact switch (11.1"H, 6.6"W box less cover and handle). Short circuit withstand rating—100,000 RMS sym. amps. Use 3-Pole switch for 200A application. Siemens Industry, Inc. Industrial Controls Catalog HNF361J HNF362JH HNF362J HNF363J HNF364J HNF365J HNF366J HNF367J ■ HNF368J 13 14 19 24 47 119 120 295 310 5 10 10 15 15 15 15 15 15 Suitable 10 20 20 40 60 125 200 250 250 7 1/2 20 20 30 50 50 50 50 50 for use as service entrance equipment except for 1200 when used on a 480 or 600V grounded wye system. Also rated type 3S / 3R. Indicates oversized enclosure (30A switch in a 60A enclosure or a 60A switch in a 100A enclosure. Product Category: HDSS 20 50 50 75 125 250 400 500 500 10 20 25 40 50 50 50 50 50 30 40 60 100 150 350 500 500 500 5 10 10 20 40 50 50 50 50 — — 30 50 50 50 50 50 50 600V DC and 600V DC horsepower rating shown requires (2) poles to be connected in series. grade stainless steel. For switches with enclosures constructed from 316 grade stainless steel see page 18/9. 304 18/5 Switches Heavy Duty Safety Switches Type 4/4X & 12 with Viewing Window Description Features 30–600A, 3-pole 600V max. in fusible and non-fusible versions in Type 4/4X stainless steel and Type 12 enclosures. All allow viewing of visible blade position. 30–200A also allow viewing of indicating type fuses. ▪ Rugged installer-friendly enclosure design features a gasket flange with continuously welded seams ▪ Tool-free cover latches ▪ Two, three and four point mounting ▪ Metal handle with large insulating grip features a positive stop in both ON and OFF position ▪ Ground lugs provided as standard ▪ Type 12 enclosures are fabricated from galvanized steel and are also rated for 3R/3S outdoor applications ▪ Type 4X stainless steel switches (30–200A) are provided with stainless steel interior parts ▪ The widest range of accessories available including 200% neutrals, gold plated PLC auxiliary contacts and isolated ground kits Maximum Horsepower Ratings System Ampere Rating Catalog Number List Price $ Ship. Weight 240V AC 1 Phase, 2 Wire 480V AC 3 Phase, 3 Wire 3 Phase, 3 Wire 3-Pole, 3 Wire Fusible, Type 12 30 60 100 200 400 600 HF361JW HF362JW HF363JW HF364JW HF365JW HF366JW HNF361JW HNF362JW HNF363JW HNF364JW HNF365JW 17 22 26 53 166 168 3 10 15 — — — 7 1/2 15 30 60 125 200 15 30 60 125 250 400 HF361SW HF362SW HF363SW HF364SW HF365SW 14 21 25 51 133 3 10 15 15 15 10 20 40 60 125 20 50 75 125 250 In HNF361SW HNF362SW HNF363SW HNF364SW HNF365SW 17 23 28 55 168 3 10 15 — 15 7 1/2 15 30 60 125 pounds (lbs). switches are also rated 600V DC. HP ratings listed apply only when time delay fuses are used. Also rated 3S/3R for outdoor use. 5 10 20 40 50 50 — 30 50 50 — — 15 23 27 54 134 30 60 100 150 350 5 10 20 40 50 — 30 50 50 — 15 30 60 125 250 3 10 15 15 15 20 50 75 150 350 5 10 20 40 50 — 30 50 50 — 600 Volt AC / 250 Volt DC 10 20 40 60 125 All Maximum switches are suitable for use as service entrance equipment. Use outside poles of 3-pole switch for 2-pole application. 600V DC and 600V DC horsepower rating shown requires (2) poles to be connected in series. 18/6 Product Category: HDSS 200A 20 50 75 150 350 500 600 Volt AC / 250 Volt DC 3-Pole, 3 Wire Non-Fusible, Type 4X Stainless Steel 30 60 100 200 400 600V DC 600 Volt AC / 250 Volt DC 3-Pole, 3 Wire Fusible, Type 4X Stainless Steel 30 60 100 200 400 250V DC 600 Volt AC / 250 Volt DC 3-Pole, 3 Wire Non-Fusible, Type 12 30 60 100 200 400 600V AC 3-Phase, 3 Wire 20 50 75 125 250 30 60 100 150 350 5 10 20 40 50 — 30 50 50 — 304 grade stainless steel. For switches with enclosures constructed from 316 grade stainless steel see page 18/9. Siemens Industry, Inc. Industrial Controls Catalog Switches Heavy Duty Safety Switches Type VBII 4 & 6 Pole Heavy Duty Safety Switches Application Standards 4 & 6 pole Switches are commonly used as a disconnecting means for two-speed, two-winding motors. Fused switches provide both over current and short circuit protection. Non-fusible switches normally provide a local disconnection means for twospeed motors which are remote from their motor controller. 4 pole switches are also used in 3-phase, 4-wire circuits when a switching neutral is required. All 4 & 6 pole switches are service entrance rated. ▪ UL & CUL listed under file #E4776 ▪ Meets UL98 for enclosed switches ▪ 4 & 6 Pole switches are suitable for use as service entrance ▪ Meets NEMA Standard KS-1 for enclosed switches ▪ Meets NEC wire bending space requirements Description 4 & 6 pole switches are available in 30-200A ratings and in both fusible and non-fusible versions. 4-pole switches are supplied with either Type 1 or Type12/3R enclosures. 6-pole switches are available with either Type 12/3R or Type 4X stainless steel enclosures. Features ▪ Visible blade, double break switching action ▪ Highly visible ON/OFF indication ▪ Defeatable dual cover interlock ▪ Padlock option in OFF position 햲 ▪ All copper current carrying parts ▪ Tangenital knockouts (Type 1, 4-pole switches) HNF663S 4 Pole Type VBII Switches햲 햳 System Indoor Type 1 Amp Catalog List Rating Number Price $ 햴 Type 12/3R Industrial Ship Wt. Catalog List Ship Wt. (lbs.) Number Price $ (lbs.) Horsepower Ratings 240V, 2Ø, 4W 240V 3Ø Std. Max. Std. Max. 480V, 3Ø Std. Max. 600V, 3Ø 250V Std. Max. DC Fusible 600 Volt AC, 250 Volt DC — 4 Pole, 4 Fuse햵 30 60 100 200 HF461 HF462 HF463 HF464■ 36 40 43 88 HF461J HF462J HF463J HF464J■ 36 40 43 88 3 71⁄2 15 25 10 20 30 50 3 71⁄2 15 25 71⁄2 15 30 60 5 15 25 50 15 30 60 125 71⁄2 15 30 60 20 50 75 150 5 10 20 40 32 34 36 78 — — — — 10 20 30 50 — — — — 10 20 40 60 — — — — 20 50 75 125 — — — — 30 60 100 150 5 10 20 40 Non-fusible 600 Volt AC, 250 Volt DC — 4 Pole 30 60 100 200 HNF461 HNF462 HNF463■ HNF464■ 32 34 36 78 HNF461J HNF462J HNF463J■ HNF464J■ 6 Pole Type VBII Switches햲 햳 System Type 12/3R Industrial Type 4X Stainless Steel Amp Catalog List Ship Wt. Catalog List Ship Wt. Rating Number Price $ (lbs.) Number Price $ (lbs.) 햴 Horsepower Ratings 240V 3Ø 480V, 3Ø Std. Max. Std. Max. 600V, 3Ø Std. Max. 250V DC Fusible 600 Volt AC, 250 Volt DC — 6 Pole, 6 Fuse햵 30 60 100 200 HF661J HF662J HF663J■ HF664J■ 37 41 44 90 HF661S■ HF662S■ HF663S■ HF664S■ 37 41 44 90 3 71⁄2 15 25 71⁄2 15 30 60 5 15 25 50 15 30 60 125 71⁄2 15 30 60 20 50 75 150 5 10 20 40 33 35 37 80 — — — — 10 20 40 60 — — — — 20 50 75 125 — — — — 30 60 100 150 5 10 20 40 Non-fusible 600 Volt AC, 250 Volt DC — 6 Pole 30 60 100 200 HNF661J HNF662J HNF663J HNF664J 33 35 37 80 ■ Built to order. Allow 2–3 weeks for delivery. HNF661S HNF662S HNF663S HNF664S■ 햴 햲 Lugs are aluminum alloy as standard. Optional copper body lugs are available. 햳 All 4 & 6 pole VBII switches are suitable for use as service equipment when a neutral is installed or equipment ground kit is properly connected. Siemens Industry, Inc. Industrial Controls Catalog 햵 Dual horsepower ratings: Std. – applies when non-time-delay fuses are installed. Max. – applies when time delay fuses are installed. Fusible switches accept Class H Fuses as the standard. Class R & J fuses can also be installed and increase the rating from 10,000 to 200,000 AIC. For Product Category: HDSS Class J, the load base is moved upward. For Class R fuses, rejection kits are required. 18/7 Switches Heavy Duty Safety Switches Special Application Switches / Interlocked Receptacle Switches Application Description 햲 햳 Receptacle Safety Switches provide cord connection protection of heavy-duty portable equipment (welders, infrared ovens, batch feeders, portable conveyors, assembly line fixtures and tools, refrigerator trucks, etc.) under load or fault conditions. Type 12 and 4/4X Receptacle Safety Switches are available with 3-phase, 4-wire grounded type Crouse-Hinds Arkite™ 2 or Pyle-National receptacle, pre-wired and mounted with interlock linkage to the switch mechanism. Insertion or removal of the plug is prevented by the interlock linkage while the switch is in the “ON” position. Receptacle prevents operation of switch if incorrect plug is inserted. Standards All receptacle switches are UL listed under file #E4776. Those with a viewing window are also CSA certified under file #1079316. Crouse-Hinds Interlocked Receptacle Switches 햷 Ampere Rating햶 Type 12 Catalog Number 햸 Type 4/4X Catalog Number List Price $ Shipping Weight Std. Pkg.햵 List Price $ Accepts Crouse-Hinds Arktite 햲 Plug Catalog Number 240V Fusible, 3-Pole, 3-Wire 30 60 100 HF321JCH HF322JCH HF323JCH HF321SCH▲ HF322SCH▲ HF323SCH▲ 23 30 36 APJ3485 & NPJ3485 APJ6485 & NPJ6485 APJ10487 & NPJ10487 HF361SCH HF362SCH HF363SCH▲ 24 30 36 APJ3485 & NPJ3485 APJ6485 & NPJ6485 APJ10487 & NPJ10487 HNF361SCH▲ HNF362SCH HNF363SCH▲ 22 29 35 APJ3485 & NPJ3485 APJ6485 & NPJ6485 APJ10487 & NPJ10487 24 30 36 APJ3485 & NPJ3485 APJ6485 & NPJ6485 APJ10487 & NPJ10487 22 29 35 APJ3485 & NPJ3485 APJ6485 & NPJ6485 APJ10487 & NPJ10487 600V Fusible, 3-Pole, 3-Wire 30 60 100 HF361JCH HF362JCH HF363JCH 600V Non-Fusible, 3-Pole, 3-Wire 30 60 100 HNF361JCH▲ HNF362JCH HNF363JCH▲ 600V Fusible, 3-Pole, 3-Wire with Viewing Window 30 60 100 HF361JCHW▲ HF362JCHW HF363JCHW▲ HF361SCHW▲ HF362SCHW HF363SCHW▲ 600V Non-Fusible, 3-Pole, 3-Wire with Viewing Window 30 60 100 HNF361JCHW▲ HNF362JCHW HNF363JCHW▲ HNF361SCHW▲ HNF362SCHW▲ HNF363SCHW▲ Pyle-National Interlocked Receptacle Switches 3-Poles Fusible and Non-Fusible Type 12 Ampere Rating Voltage Catalog List Price $ Switch Receptacle Rating Number 햷 30 30 600 (F) HF361JPN▲ 600 (N-F) HNF361JPN 60 60 240 (F) HF322JPN▲ 600 (F) HF362JPN▲ 600 (N-F) HNF362JPN ▲ Built to order. Allow 6–8 weeks for delivery. 햲 Arktite™ is a registered trademark of the CrouseHinds Company. Plugs are not sold or supplied by Siemens. 18/8 Type 12 Stainless Steel Catalog List Number 햸 Price $ HF361SPN▲ HNF361SPN — HF362SPN▲ HNF362SPN 햳 햴 햵 — Shipping Accepts Pyle-National Weight QuelArc™ 햳햴 Plugs Std. Pkg.햵 Plug Catalog Number 23 JPD-83046 21 28 28 27 JPD-116046 Indicates plug with maximum diameter cable bushing. QuelArc™ is a registered trademark of the PyleNational Company. In pounds (lbs.). Product Category: HDSS 햶 햷 햸 Ampere rating of both switch and receptacle. Also rated Type 3R/3S. Enclosure is constructed of Type 304 stainless steel. Siemens Industry, Inc. Industrial Controls Catalog Switches Heavy Duty Special Application Safety Switches / Type VBII Non-Metallic & 316 Grade Stainless Steel Application Siemens Non-metallic and 316 grade stainless steel switches provide a superior level of corrosion resistance to assure trouble free performance in the most severe conditions. 316 grade stainless steel provides increased corrosion resistance when compared to 304 grade, especially in atmospheres containing a high level of chlorine commonly encountered in marine and waste management applications. Our non-metallic enclosures are constructed from fiberglass reinforced polyester and are extremely resistant to a wide range of corrosive atmospheres. They allow a wide range of operating temperatures and their insulating properties virtually eliminate problems caused by internal condensation. Description 30-200A, 600V Max, fusible and nonfusible switches are available in both non-metallic and 316 grade stainless steel versions. All are supplied with factory installed ground bars as standard. Viewing windows are also available in the stainless offering. Type 4/4X Non-Metallic Ampere Catalog Rating Number Ship Weight Std. pkg. List Price $ (lbs.) Horsepower Rating—3-Phase 250 600 Volts Volts Max. DC DC 240 Volt AC 480 Volt AC 600 Volt AC Std. Max. Std. Max. Std. 햶 3-Pole, 4-Wire, 240 Volt Fusible, Type 4X 30 60 HF321NX HF322NX▲ 21 22 3 71⁄2 71⁄2 15 — — — — — — — — 5 10 — — 20 50 75 150 5 10 20 40 15햵 30햵 50햵 50 30 60 100 150 5 10 20 40 15햵 30햵 50햵 50 3-Pole, 4-Wire, 600 Volt AC Fusible, Type 4X햳햴햶 30 60 100 200 HF361NX HF362NX HF363NX▲햲 HF364NX▲햲 21 22 39 83 3 71⁄2 15 25 71⁄2 15 30 60 5 15 25 50 15 30 60 125 71⁄2 15 30 60 3-Pole, 3-Wire, 600 AC Volt Non-Fusible,햲 Type 4X햳햴 30 60 100 200 HNF361X HNF362X HNF363X▲ HNF364X▲ 20 20 38 81 — — — — 71⁄2 15 30 60 — — — — 20 50 75 125 — — — — Type 4/4X 316 Grade Stainless Steel Standard Ampere Catalog Rating Number With Viewing Window List Price $ Catalog Number Horsepower Rating—3-Phase List Price $ Ship Weight (lbs.) 250 600 Volts Volts Max. DC DC 240 Volt AC 480 Volt AC 600 Volt AC Std. Max. Std. Max. Std. 3 71⁄2 15 25 71⁄2 15 30 60 — — — — — — — — 3 71⁄2 15 25 71⁄2 15 30 60 5 10 25 50 15 30 60 125 10 20 40 60 — — — — 20 50 75 125 240V AC, 250V DC Fusible 3-Pole, 3-Wire 30 60 100 200 HF321SS▲ HF322SS▲ HF323SS▲ HF324SS▲ — — — — — — — — 15 19 27 48 — — — — — — — — 5 10 20 40 — — — — 71⁄2 15 30 60 20 50 75 150 5 10 20 40 — 30햵 50햵 50 — — — — 30 60 100 150 5 10 20 40 — 30햵 50햵 50 600V AC, 250V DC Fusible 3-Pole, 3-Wire햴 30 60 100 200 HF361SS HF362SS HF363SS HF364SS HF361SSW HF362SSW▲ HF363SSW▲ HF364SSW▲ 17 21 28 54 600V AC, 250 V DC Non-Fusible 3-Pole, 3-Wire햲햴 30 60 100 200 HNF361SS HNF362SS HNF363SS HNF364SS HNF361SSW HNF362SSW▲ HNF363SSW▲ HNF364SSW▲ ▲ Built to order. Allow 6–8 weeks for delivery. 햲 Also used for 240 volt applications. Siemens Industry, Inc. Industrial Controls Catalog 15 21 26 51 — — — — 햳 Add “L” to end of catalog number for switches less line & load lugs with mounting hardware for crimp type or copper body lugs. 햴 200A switches are also rated 600V DC max. Product Category: HDSS 햵 햶 600V DC voltage and horsepower rating shown requires (2) poles to be connected in series. Supplied with factory installed neutral. 18/9 Switches General and Heavy Duty Safety Switches Accessories HT63 HR612 HN612 Class R Fuse Clip Kits Class T Fuse Adapter Kits All General Duty and Heavy Duty Switches are field convertible to accept Class R Fuse Clip Kits. The kits prevent the installation of Class H and K fuses (one kit required per 3 pole switch). Class R Fuse Clip Kits All 200-600A, General Duty and 1001200A Heavy Duty Switches are field convertible to accept Class T fuses. 400-800A switches are field convertible to accept Class T fuses by moving the load base to a pre-drilled T fuse position. Catalog Number Class T Fuse Adapter Kits햲 List Price $ Description GSRK321 30A, 240V Kit (GD only) HR21 30A, 240V Kit (HD only) Catalog Number HR612 30A, 600V Kit/60A, 240V Kit HT23 100A, 240V Kit HR62 60A, 600V Kit HT63 100A, 600V Kit HR63 100A Kit HT24 200A, 240V Kit HR64 200A Kit HT64▲ 200A, 600V Kit HR656 400A/600A Kit TFAK82 1200A, 240V Kit List Price $ Description HN264 200% Neutral Kits Class J Fuse Neutral Kits All 30-600A, 600V and 100-600A,240V fusible Heavy Duty Switches are field convertible to accept Class J fuses by moving the load base to a pre-drilled J fuse position. All 200-600A, 240V fusible General Duty switches can also be field converted to accept Class J fuses. Standard Neutral Kits can be field installed in General and Heavy Duty Switches. Neutral Kits Switch Ampere Rating 30 GD Kit Catalog Number W410190 30 HD, 60 GD HN612 60, 100 HD, 100 GD 200 UL listed 200% Neutrals are available on 100-600A Heavy Duty Switches. They are typically used with non-linear transformers or where increased neutral ampacity/lug capacity is required. 200% Neutral Kits List Price $ HN623 Switch Ampere Rating 100 Kit Catalog List Number Price $ HN263 Wire Range Line & Load Lugs (Cu/Al) (2) #14-1/0 AWG HN64 200 HN264 (2) #6 AWG-300 Kcmil 400 & 600 HN656 400 HN656 800 & 1200 HN678 (2) 1/0 AWG-750 Kcmil or (4) 1/0 AWG-250 Kcmil 600 HN678 (4) 1/0 AWG-750 Kcmil ▲ Built to order. Allow 6–8 weeks for delivery. 햲 One kit per pole required. 18/10 Product Category: HDSS Siemens Industry, Inc. Industrial Controls Catalog Switches General and Heavy Duty Safety Switches Accessories HA261234 HA161234 Auxiliary Contacts Auxiliary Contacts are available only for Heavy Duty Switches. The auxiliary contacts are available in 1 normally open and 1 normally closed or 2 normally open and 2 normally closed configurations. Siemens offers a PLC Auxiliary Switch (30-200A) that has very low resistance for low voltage and current typical in PLC circuits. All auxiliary contacts make after and break before main switch contacts. Auxiliary Contacts Switch Ampere Rating Aux. Switch Catalog List Number Price $ Kit Ampere Rating 125V AC Max. 250V AC Max. Kit Horsepower Rating 28V DC 125V AC Max. Max. 250V AC Max. 28V DC Max. With 1 NO & 1 NC Isolated Contacts 30-200 HA161234 10 10 — 1/2 3/4 — 400-1200 HA165678 10 10 — 1/2 3/4 — With 2 NO & 2 NC Isolated Contacts 30-200 HA261234 10 10 7 1/2 3/4 — 400-1200 HA265678 10 10 7 1/2 3/4 — Low Current PLC Type with 1 NO & 1 NC Gold Plated Contacts 30-200 HA361234 10 10 — 1/2 3/4 — 400-1200 HA365678 10 10 — 1/2 3/4 — Fuse Puller Kits Fuse Puller Kits Fuse Puller Kits are field installable in 30-100A Type VBII Heavy Duty Switches (one kit required per 3 pole switch). Switch Ampere Rating 030 Fuse Puller Kit Catalog Number HP61 060 HP62▲ 100 HP63▲ List Price $ HP61 ▲ Built to order. Allow 6–8 weeks for delivery. Siemens Industry, Inc. Industrial Controls Catalog Product Category: HDSS 18/11 Switches General and Heavy Duty Safety Switches Accessories Copper Lug Kits Heavy duty switches are UL approved to accept field installed copper lug kits. Copper Lug Kits Switch Ampere Rating 30–60 Copper Lug Catalog List Number Price $ HLC612 Description (9) Lugs/Kit #14-4 AWG Cu 100 HLC63▲ (9) Lugs/Kit #14-1/0 AWG Cu 200 HLC64▲ (9) Lugs/Kit #6 AWG-300 Kcmil Cu 400–1200 HLC65678 HLC612 (1) Lugs/Kit #1/0 AWG-600 Kcmil Cu Equipment Ground Kits Equipment Ground Lug Kits are available for all General and Heavy Duty Switches. They are field installable in Type 1 and Type 3R Switches and are factory installed as standard in Type 4 / 4X and Type 12 and also in all VBII 4&6 pole Switches. Equipment Ground Kits Switch Ampere Rating 30A GD Catalog Number GSGK60 60–200 GD 30–200 HD List Price $ Number of Terminals 2 Wire Range Per Terminal (Cu/Al) #14-8 AWG HG61234 2 #14-4 AWG HG61234 2 #14-4 AWG 400 & 600 HG656 4 #6 AWG-250 Kcmil 800–1200 HG678 8 #6 AWG-250 Kcmil HG261234 Isolated Ground Kits Isolated Ground Kits are available on 30-600A Heavy Duty Switches. They are normally used on circuits with a high content of computer or other electronic loading which require a ground which is isolated from the building ground and neutral circuits. The kit includes both isolated and grounded terminals as listed below. Isolated Ground Kits Switch Ampere Rating 30–200 Catalog Number HG261234 400–600 HG2656 List Price $ Number of Terminals Isolated Grounded 2 2 Wire Range Per Terminal (Cu/Al) #14-4 AWG 4 #14-2/0 AWG 4 ▲ Built to order. Allow 6–8 weeks for delivery. 18/12 Product Category: HDSS Siemens Industry, Inc. Industrial Controls Catalog Switches General and Heavy Duty Safety Switches Hub and Lug Data SSH150 ECHV300 Interchangeable Hubs Conduit hubs are available for Type 3R, 12 and 4 / 4X applications. 30-200A Type 3R Switches are provided with a conduit hub provision and a removable hub plate on their top rainshed. Hubs Conduit Size (inches) Catalog Number List Price $ Used On Type 3R 햲 Cover 3/4 1 1 1/4 ECHA000 ECHA075 ECHA100 ECHA125 Cover 3/4 1 1 1/4 1 1/2 2 2 1/2 ECHS000 ECHS075 ECHS100 ECHS125 ECHS150 ECHS200 ECHS250 2 1/2 3 3 1/2 4 ECHV250 ECHV300 ECHV350 ECHV400 ECHS200 Compression Lug Mounting & Neutral Barrier Kit All Heavy Duty Switches are field convertible for (Crimp) type lugs. When compression lugs are required for 30-100A switches, a neutral barrier kit is required for 1-Phase, 3W or 3-Phase, 4W applications. When compression lugs are required on 400-1200A switches, lug mounting kits are required. Compression Lug Mounting 햴 and Neutral Barrier Kits 30A GD Only 60–200A GD 30–200A HD 400–1200A Switch Ampere Catalog Rating Number 30 HCL612 List Price $ Kit Description Neutral Barrier Kit 60 & 100 HCL623 Neutral Barrier Kit 400 햵 HCL65 1 Pole, Compression Lug Mounting Kit 400 & 600 햶 HCL65678■ 1 Pole, Compression Lug Mounting Kit 800 HCL65678■ & 1200 햶 1 Pole, Compression Lug Mounting Kit Type 4/4X햳 Lugs 3/4 1 1 1/4 1 1/2 2 30 & 60A Switches are suitable for use with 60° or 75°C wire. 100–1200A are suitable for use with 75°C rated wire. SSH075 SSH100 SSH125 SSH150 SSH200 30–200A SL0420 Multiple Padlock Accessory A tamper-proof device to provide for multiple padlocking to meet OSHA or plant requirements. Accepts up to 6 1/4" padlocks. Catalog number SL0420. Standard Carton-12. List Price $83.00. Kirk-Key Interlocks Kirk-Key Interlocks can be factoryinstalled only on Type VBII Heavy Duty Safety Switches. Interlocks are used to prevent the operator from making an unauthorized operation. The interlock system is a simple method of applying key interlocks to safety switches so as to require operation in a predetermined sequence. List Price $1925.00. Before consulting the factory, the following information is required: ▪ User name and address ▪ Key number from lock assemblies on any existing locks to be interlocked with ▪ Complete locking scheme Consult factory for delivery. Wire Ranges (Line, Load and Standard Neutral) Note: 30 thru 200A. Type 3R Switches have removable hub plates on rainshed. 400A and larger Type 3R Switches have no provisions for mounting hubs. Drill or punch hole in the field to accommodate hub size desired. Switch Ampere Rating 30GD ■ Built to order. Allow 2-3 weeks for delivery. 햲 Hubs suitable for 3R Switches. 햳 Also suitable for Type 12 applications. 햴 Neutral Barrier kits are required on 30-100A switches only and only with 1-Phase / 3W or 3-Phase / 4W loads. Compression Lugs mounting kits are required on 4001200A switches only. 햵 Provides mounting for a single line or load lug. 햶 Provides mounting for (2) compression lugs per phase on line or load. Siemens Industry, Inc. Industrial Controls Catalog Wire Range with Wire Bending Space Per NEC Requirements Lug Wire Range #14-8 AWG (Cu/AI)햷 #14-8 AWG (Cu/Al) 30HD #14-6 AWG (Cu/AI) #14-2 AWG (Cu/Al) 60햹햻 #14-3 AWG (Cu/AI) #14-2 AWG (Cu/Al) 100햽 #14-1/0 AWG (Cu/Al) #14-1/0 AWG (Cu/Al) 200햺 #6 AWG-250 Kcmil (Cu/Al) #6 AWG-300 Kcmil (Cu/Al) 400햸 1/0 AWG-750 Kcmil (Cu/Al) or (2) 1/0 AWG-250 Kcmil (Cu/Al) (1) 1/0 AWG-750 Kcmil (Cu/Al) or (2) 1/0 AWG-250 Kcmil (Cu/Al) 600햸 (2) 1/0 AWG-750 Kcmil (Cu/Al) or (4) 1/0 -250 Kcmil (Cu/Al) (2) 1/0 AWG-750 Kcmil (Cu/Al) or (4) 1/0 AWG-250 Kcmil (Cu/Al) 800 (3) 1/0 AWG-750 Kcmil (Cu/Al) Line Load (4) 1/0 AWG-750 Kcmil (Cu/Al) neutral (3) 1/0 AWG-750 Kcmil (Cu/Al) Line Load (4) 1/0 AWG-750 Kcmil (Cu/Al) neutral 1200 (4) 3/0 AWG-750 Kcmil (Cu/Al) Line Load (4) 1/0 AWG-750 Kcmil (Cu/Al) neutral (4) 1/0 AWG-750 Kcmil (Cu/Al) Line Load (4) 1/0 AWG-750 Kcmil (Cu/Al) neutral 햷 Line lugs are UL approved to accept #14-6 CU/Al cable. Max. wire size for height reduced switches is 500 kcmil (Cu/Al). 햹 All but 60A GD & Compact HD NF switches are also UL approved for #2 Cu/Al conductors. 햸 Product Category: HDSS 햺 All 200A Heavy Duty Switches have a wire range & wire bending space for (1) #6-300 Kcmil (Cu/Al). Also for 30A oversized heavy duty switches. 햽 Also for 60A oversized heavy duty switches. 햻 18/13 Switches Enclosed Switches Rotary Disconnect Switches in Non-Metallic Enclosures Application Siemens Rotary Disconnect switches are ideally suited for use as ”in sight“ disconnects for motor loads and other electrical equipment which is remotely located from its branch circuit protective device. All are supplied in non-metallic enclosures which are UL & CUL or CSA approved for a wide range of both indoor and outdoor environments. All meet UL508 requirements. Siemens Enclosed Rotary Disconnect Switches ▪ 16–125A, Non-Fusible ▪ 600VAC max. rated (except catalog no. HNF3100CX is rated 480VAC max.) ▪ Available in both Type 12 and 4X non-metallic enclosures ▪ Both screw and hinged cover designs available ▪ Listed and marked “suitable for use as motor disconnect” per NEC Section 430-109 Description 16–125A non-fusible switches are available in fiberglass reinforced polycarbonate enclosures which are UL approved as Type 12 & 4X and for either indoor or outdoor use. All are horsepower and load break rated. All are panel mounted and are either supplied with factory installed aux. contacts or will accept contact kits. All are compact in size while providing ample wiring space for copper line & load conductors. 3 Pole, 3 Wire ▪ 16–63A screw cover switches have factory installed ground bars. All hinge cover switches accept ground lug kits ▪ Screw cover switches are UL listed under File No. E47705 and are CSA certified under File No. 203576 ▪ IEC 60947-3 rated and CE marked (enclosures are IP65 rated) ▪ Screw cover switches are provided with knockouts ▪ Hinged door switches are UL listed for multiple line and load conductors per phase in 30–100A ratings. They are UL & CUL listed under File No. E191706 Catalog Number Ampere Rating ▪ HP rated ▪ Rotary handles are available in black, red, and yellow and in pistol grip designs ▪ Padlockable in OFF position with up to (3) padlocks Horsepower Ratings List Price $ 3 Pole, 3 Wire with (1) NO & (1) NC Aux. Contact List Price $ Shipping Weight 240V AC 1 Phase 3 Phase 480V AC 3 Phase 600V AC 3 Phase Non-Fusible, Type 1, 4X & 12K with Screw Cover and Black Rotary Handle 600V AC Max. 16 25 30 30 30 63 100 125 3LD2064-0TB51-0US2 3LD2164-0TB51-0US2 3LD2264-0TB51-0US2 — — 3LD2565-0TB51-0US2 3LD2766-0TB51-0US2 3LD2866-0TB51-0US2 — — 3LD2064-1GP51-0US2 3LD2164-1GP51-0US2 3LD2264-1GP51-0US2 3LD2264-1TS51-0US2 ▲ 3LD2264-2TW51-0US2 ▲ 3LD2565-1GP51-0US2▲ 3LD2766-1GP51-0US2▲ 3LD2866-1GP51-0US2▲ 1 1 1 1 1 3 6 6 11⁄2 3 3 3 3 10 — — 3 71⁄2 10 10 10 15 30 40 71⁄2 10 20 20 20 40 60 75 10 15 20 20 20 50 75 100 71⁄2 10 20 20 20 40 60 75 10 15 20 20 20 50 75 100 15 40 50 20 50 — Non-Fusible, Type 1, 4X & 12K with Screw Cover and Red and Yellow Rotary Handle 600V AC Max. 16 25 30 30 30 63 100 125 3LD2064-0TB53-0US2 3LD2164-0TB53-0US2 3LD2264-0TB53-0US2 — — 3LD2565-0TB53-0US2 3LD2766-0TB53-0US2▲ 3LD2866-0TB53-0US2▲ — — 3LD2064-1GP53-0US2 3LD2164-1GP53-0US2 3LD2264-1GP53-0US2 3LD2264-1TS53-0US2 ▲ 3LD2264-2TW53-0US2 ▲ 3LD2565-1GP53-0US2▲ 3LD2766-1GP53-0US2▲ 3LD2866-1GP53-0US2▲ 1 1 1 1 1 3 6 6 11⁄2 3 3 3 3 10 — — 3 71⁄2 10 10 10 15 30 40 Non-Fusible, Type 4X with Hinged Door and Black Pistol Grip Rotary Handle 480V AC Max. 30 60 100 HNF3030CX HNF3060CX HNF3100CX ▲ Built to order. Allow 6–8 weeks for delivery. Carton quantity of (1). Shipping weight in pounds (lbs.). Approved for both indoor and outdoor use. No cover interlock provided. 30 and 60A switches are also rated 600V AC. 18/14 — — — — — — 4 4 5 3 10 15 Also Switch Screw rated as Type 12 and UL approved for both indoor and outdoor use. Defeatable cover interlock provided. cover enclosures are constructed from Makrolon 9425. Hinged cover enclosures are constructed from fiberglass reinforced polycarbonate. Switch is supplied with (2) NO and no NC aux. contacts. Product Category: HDSS 71⁄2 15 25 is supplied with (4) NO and no NC aux. contacts. Ground bar is not provided or available. Aux. contacts break about 3 Ms before and make about 3 Ms after main switch contacts. 6P, 25A, switch with 1 NO & 1 NC aux. contacts and a black operating handle is also available. Order catalog number 3LD2165-4VD51 (Discount Code: Pilot Devices). Siemens Industry, Inc. Industrial Controls Catalog Switches Enclosed Switches Rotary Disconnect Selection Switches Wire ranges 60/75°C Cu Only Enclosed Disconnect Switch Dimensions (Inches)* 3LD2 Type Switches Dimensions Catalog Number Ampere Fig. Rating No. A B C D 3LD20643LD21643LD22643LD25653LD27663LD2866HNF3030CX HNF3060CX HNF3100CX 16 25 30 63 100 125 30 60 100 5.52 5.52 5.52 6.93 11.90 11.90 7.87 11.77 11.77 3.94 3.94 3.94 5.75 8.35 8.35 7.87 7.87 7.87 3.19 3.19 3.19 4.10 5.36 5.36 5.20 5.20 5.20 4.57 4.57 4.57 5.87 7.13 7.13 7.29 7.29 7.29 1 2 16 Amps 25–30 Amps 63 Amps 100–125 Amps (1) #18- 10 AWG (1) #14 - 10 AWG (1) #14 - 6 AWG (1) #12- 1 AWG HNF Type Switches (1) #14 - #10 AWG Solid (1) #14 - #4 AWG Stranded Up to (4) #12 AWG Solid Up to (3) #12 AWG Stranded Up to (6) #14 AWG Stranded Up to (4) #14 AWG Stranded with (1) #10 AWG Stranded 30 Amps Note: 3LD2 Type switches only have top and bottom end KOs as follows: 16-30A - 1/2" & 3/4", 63A - 3/4" & 1", 100 & 25A - 1" & 1 1/4" Figure 1 D (1) #14 - #10 AWG Solid (1) #14 - #1 AWG Stranded (2) #6 AWG Stranded Up to (3) #8 AWG Stranded Up to (6) #10 AWG Stranded Up to (6) #12 AWG Solid C 60 & 100 Amps A Figure 2 D C B A UL and CUL Short Circuit Withstand Ratings Short Circuit Withstand Rating and Fuse Class With Load Side Fusing With Line Side Fusing Ampere 5 kA at Rating 600V Max 10 kA at 600V Max 18 kA at 480V Max 5 kA at 480V Max 18 kA at 480V Max 3LD2 Type Switches — — — — RK5 25 & 30 (80A Max) — — — — — — — — — — — 63 RK5 (175A Max) 100 & 125 — RK5 (200A Max) Ampere Rating — H, K & RK5 (100A Max) H, K & RK5 (150A Max) 60 J, T & CC (100A Max) H, K & RK5 (60A Max) 100 H, K & RK5 (30A Max) For gG Fuse Size Short Circuit Rating 3LD2 Screw Cover Switches HNF Type Switches 30 B IEC Fuse and Withstand Ratings RK5 (50A Max) 16 .5 Ferraz Shawmut A50P or lower let-through semiconductor fuses (60A Max) Ferraz Shawmut A50P or lower let-through semiconductor fuses (100A Max) use as supplemental protection on the load side of the branch circuit over current protective device. Ground lug kit has two lugs for #14-4 Cu/Al wire. Factory installed ground lugs supplied as follows: 16-30A #14-10 Cu, 63A #14-8 Cu. Ground lug not provided and is not available on catalog numbers 3LD2264-2TW51-0US2 and 3LD2264-2TW53-0US2. 6.38 inches high including mounting feet. 7.85 inches high including mounting feet. 60 & 100A HNF switches are rated 10kA at 480V max. with line side Class H, K & RK5 150A max. fuses. Wire range (1) #14-2 AWG 60/75 °C Cu only. 16-63A 3LD switches are also rated 5kA at 600VAC max when protected by a 3RV type MSP of the same or lesser ampere rating. 16 20A 5k Arms 25 25A 10k Arms 32 50A 10k Arms 63 63A 15k Arms 100 100A 20k Arms 125 125A 20k Arms HNF Hinged Cover Switches 30 63A 10k Arms 60 100A 10k Arms 100 100A 10k Arms Accessories Switch Ampere Rating Catalog Number 3LD2 Type Switches List Price $ Description 16 –30A 3LD9220-2C Neutral Kit 63A 3LD9250-2CA Neutral Kit 100 –125A 3LD9280-2C Neutral Kit HNF Type Switches 30–100A GSGK60 Ground Lug Kit 30A LBRA1 Auxiliary Contact Kit (1 NO - 1 NC) 60 –100A LBRA2 Auxiliary Contact Kit (1 NO - 1 NC) 30 –100A HF63CX Neutral Kit *For inches / millimeters conversion, multiply inches by 25.4. Siemens Industry, Inc. Industrial Controls Catalog Product Category: HDSS 18/15 Switches Disconnect Switches Compact Non-Fusible — Selection Rotary and Toggle Features ▪ 25 -125 Ampere, to 75 hp 480V and 600V ▪ Rotary and Toggle actuation models ▪ LBR Type switches are padlockable in the OFF position and are UL & CUL listed under File No. E191706 as manual motor controllers per UL Standard UL508 ▪ 3LD2 Type switches are padlockable in the OFF position and are UL listed under File No. E47705 per UL508 and are CSA certified under File No. 203576 ▪ Base, DIN-rail and door mounting ▪ Multiple conductor, distribution terminal type rating LBR & LBT Type (40A -100A only) Type LBR Rotary Switches Type LBT Toggle Switches ▪ IEC 947-1 rated, CE marked ▪ Listed and marked “suitable as motor disconnect” per NEC Section 430-109 Short Circuit Withstand Ratings Switch Rating & Type Max. Line Side Fuse Rating 5kA with Line Side Class H, K, or RK5 Fuses Application Siemens Load Break Switches are listed as manual motor controllers and are suitable as motor disconnects. They are load break rated and act as enclosure disconnects when short circuit protection is provided upstream of the switch. If upstream over current protection is not provided, use a Siemens fusible Type VBII, CFS or MCS Disconnect Switch. Ordering Information Door Mounted Switches (Rotary Type Only) — Order either complete “3LD2” assemblies or individual “LBR” components as follows: Complete Assemblies include switch, handle, and shaft. Certain 25 and 32A assemblies are also available with factory installed neutral blocks and/or aux. contacts. These accessories can also be ordered as field installed kits. Individual Components are ordered as follows: 25A — LBR3025D switch + LBRH3 or 4 handle. 40 –100A — LBR switch + LBRH3 or 4 handle + LBRD1. Notes: (LBR Type switches only) 1. Aux contacts are available as field installed kits on 25A units only. 2. Lugs on 25A units face to the rear and lugs on 40 –100A units face toward the front. 왎 Built to order. Allow 6–8 weeks for delivery. auxiliary contacts (1 NO and 1 NC). Includes 25 & 32A 3LD2 3LD2254-0TK51 63A 3LD2 80A Max. at 600V AC Max. 175A Max. at 600V AC Max. 10kA with Line Side Class H, K, or RK5 Fuses Base/DIN Rail Mounted Switches (Rotary or Toggle Type) — Order individual components as follows: Toggle — Order the LBT switch required and a toggle switch cover plate if needed. Rotary, Base Mounted with Door Mounted Handle — Order “LBR” switch + door mounted handle + shaft + any accessories. Rotary, Base Mounted with Direct Mounted Handle — Order “LBR” switch + direct mounted handle. 25A LBR 30A Max. at 480V AC Max. 40A, 4P LBR & LBT 60A Max. at 480V AC Max. 40 & 60A, 3P LBR & LBT 100A Max. at 480V AC Max. 80 & 100A LBR & LBT 150A Max. at 480V AC Max. 18kA with Line Side Class J, T, or CC Fuses 40 –100A, 3P LBR & LBT 100A Max. at 480V AC Max. Note: 3LD2 switches are also rated 5kA at 600V AC Max. when protected by a 3RV motor starter with a FLA rating equal to or less than the switch ampere rating. Door Mounted Complete Assemblies Operator, Shaft, & Switch) 600V AC Max. Shaft Mounted Catalog Number 4 Hole Mounted List Price $ Catalog Number AC Horsepower Ratings List Number Ampere Price $ of Poles Rating 120V 1Ø 240V 480V 1Ø 3Ø 3Ø 3LD2003-1TP53 3 16 1 ⁄2 11⁄2 3 3LD2154-0TK_ _ 3LD2154-1TP_ _ 3LD2154-1TL_ _ 3LD2154-2EP__ 3LD2103-0TK_ _ 3LD2103-1TP_ _ 3LD2103-1TL_ _ 3LD2103-2EP_ _ 3 3 3+N 3 + N 25 2 3 3LD2254-0TK_ _ 3LD2254-1TL_ _ 3LD2555-0TK_ _ — — 3LD2203-0TK_ _ 3LD2203-1TL_ _ 3LD2504-0TK_ _ 3LD2704-0TK_ _ 3LD2804-0TK_ _ 3 3+N 3 3 3 32 2 63 100 125 — — — — — — — 600V 3Ø 71⁄2 10 71/2 10 15 3 10 20 20 10 — — 15 30 40 40 60 75 50 75 100 Add 51 for a black handle or 53 for a red & yellow handle to the end of the catalog number. Handles are IP65 rated and are also UL listed for Type 1, 4X and 12 applications. 18/16 Product Category: PILO Siemens Industry, Inc. Industrial Controls Catalog Switches Disconnect Switches Compact Non-Fusible — Rotary and Selection Toggle 3LD Type Base Mounted Complete Assemblies (Operator, Shaft, & Switch) 600V AC Max. Handle Mounting Shaft (center hole) 4 Hole Catalog Number Catalog Number List Price $ — — AC Horsepower Ratings List Number Price $ of Poles 3LD2013-0TK_ _ 3 3LD2144-0TK_ _ 3LD2144-1TL_ _ 3LD2113-0TK_ _ 3LD2113-1TL_ _ 3 3+N 3LD2244-0TK_ _ 3LD2244-1TL53 3LD2545-0TK_ _ — — 3LD2213-0TK_ _ 3LD2213-1TL53 3LD2514-0TK_ _ 3LD2714-0TK_ _ 3LD2814-0TK_ _ 3 3+N 3 3 3 — — Ampere Rating 16 120V 1Ø ⁄2 240V 480V 1Ø 3Ø 3Ø 11⁄2 3 1 600V 3Ø 71⁄2 10 1 25 2 3 7 /2 10 15 32 2 3 10 20 20 63 100 125 — — — 10 — — 15 30 40 40 60 75 50 75 100 Note: Shaft length allows a maximum depth from switch mounting surface to the outside of the cover of 15.25" on 25 & 32A switches and of 15.75" on 63-125A switches. 3LD2213-0TK53 Accessories for Front Mounted 3LD2 Switches Catalog Number 3LD9200-5B 3LD9200-5BF 1 NO, 1 NC Aux. Contact 1 NO, 1 NC Aux. with Gold Plated Contacts Switches Used With 25-125A 25-125A 3LD9220-2B 3LD9250-2BA 3LD9280-2B Neutral/Ground Terminal Neutral/Ground Terminal Neutral/Ground Terminal 25 & 32A 63A 100 & 125A 3LD9220-0B 3LD9250-0BA 3LD9280-0B 4th Pole (leading ON, lagging OFF) 4th Pole (leading ON, lagging OFF) 4th Pole (leading ON, lagging OFF) 25 & 32A 63A 100 & 125A 3LD9224-1B 3LD9284-1B 3LD9224-3B 3LD9284-3B Black Handle (4 hole mtg.) Black Handle (4 hole mtg.) Red/Yellow Handle (4 hole mtg.) Red/Yellow Handle (4 hole mtg.) 25 & 32A 63-125A 25 & 32A 63-125A 3LD9224-1D 3LD9284-1D 3LD9224-3D 3LD9284-3D Black Handle (shaft mtg.) Black Handle (shaft mtg.) Red/Yellow Handle (shaft mtg.) Red/Yellow Handle (shaft mtg.) 25 & 32A 63-125A 25 & 32A 63-125A 3LD9221-2A 3LD9251-2A 3LD9281-2A 3LD9221-0A 3LD9251-0A Terminal Terminal Terminal Terminal Terminal 25 & 32A 63A 100-125A 25 & 32A 63A Description Cover Cover Cover Cover Cover 1P 1P 1P 3P 3P (Pack (Pack (Pack (Pack (Pack of of of of of 4) 4) 4) 4) 4) List Price $ 3LD9220-2C Accessories for Base Mounted 3LD2 Switches Catalog Number 3LD9200-5C 3LD9200-5CF 1 NO, 1 NC Aux. Contact 1 NO, 1 NC Aux. with Gold Plated Contacts Switches Used With 25-125A 25-125A 3LD9220-2C 3LD9250-2CA 3LD9280-2C Neutral/Ground Terminal Neutral/Ground Terminal Neutral/Ground Terminal 25 & 32A 63A 100 & 125A 3LD9220-0C 3LD9250-0CA 3LD9280-0C 4th Pole (leading ON, lagging OFF) 4th Pole (leading ON, lagging OFF) 4th Pole (leading ON, lagging OFF) 25 & 32A 63A 100 & 125A 3LD9224-1B 3LD9284-1B 3LD9224-3B 3LD9284-3B Black Handle (4 hole mtg.) Black Handle (4 hole mtg.) Red/Yellow Handle (4 hole mtg.) Red/Yellow Handle (4 hole mtg.) 25 & 32A 63-125A 25 & 32A 63-125A 3LD9224-1D 3LD9284-1D 3LD9224-3D 3LD9284-3D Black Handle (shaft mtg.) Black Handle (shaft mtg.) Red/Yellow Handle (shaft mtg.) Red/Yellow Handle (shaft mtg.) 25 & 32A 63-125A 25 & 32A 63-125A 3LD9221-2A 3LD9251-2A 3LD9281-2A 3LD9221-0A 3LD9251-0A Terminal Terminal Terminal Terminal Terminal 25 & 32A 63A 100-125A 25 & 32A 63A Description Cover Cover Cover Cover Cover 1P 1P 1P 3P 3P (Pack (Pack (Pack (Pack (Pack of of of of of 4) 4) 4) 4) 4) Handles Add Add Can and line side terminal covers are supplied as standard with 3LD2 switches. suffix 51 for a black handle or 53 for a red & yellow handle to the catalog number. Handles are 1P65 rated and are also UL listed for Type 1, 4X & 12 applications. Siemens Industry, Inc. Industrial Controls Catalog List Price $ 51 for a black handle or 53 for a red & yellow handle to the end of the catalog number. be used as replacement handles on enclosed 3LD2 switches. Product Category: PILO 3LD9251-0A Aux. contacts break about 30 Ms before and make about 3 Ms after main switch contacts. Ratings 10A at 120V AC 6A at 240V AC 1.4A at 480V AC 18/17 Switches Disconnect Switches Compact Non-Fusible — Selection Rotary and Toggle Individual Components Rotary and Toggle Switches Catalog Number LBR3025 LBR3025D LBR3040 LBR3060 LBR3080 LBR3100 LBR4040 LBT3040 LBT3060 LBT3080 LBT3100 LBT4040 Switch No. of Type Poles Rotary 3 Rotary 3 Rotary 3 Rotary 3 Rotary 3 Rotary 3 Rotary 4 Toggle 3 Toggle 3 Toggle 3 Toggle 3 Toggle 4 Ampere Rating 25 25 40 60 80 100 40 40 60 80 100 40 AC Horsepower Ratings Max AC 115V 240V 480V 600V Volt 1Ø 1Ø 3Ø 3Ø 3Ø 3 480 ⁄4 2 5 10 — 3 480 ⁄4 2 5 10 — 600 2 3 71⁄2 20 25 480 2 5 10 25 — 600 3 10 20 40 50 480 5 15 25 50 — 480 2 3 71⁄2 20 — 1 25 600 2 3 7 ⁄2 20 480 2 5 10 25 — 600 3 10 20 40 50 480 5 15 25 50 — 480 2 3 71⁄2 20 — List Price $ Standard Duty Rotary Switch Door Handles Heavy Duty Rotary Switch Door Handle LBR Type Handles Catalog Number Standard Duty LBRH2 LBRH3 LBRH4 LBRH9 LBRH10 LBRH5 LBRH6 LBRH7 LBRH8 Heavy Duty CFSH10B12 CFSH10R12 Used on Rotary Switches NEMA Type All All All All (Pistol Grip Type) All (Pistol Grip Type) 25 Amps 3-Pole, 40-60 Amps 3-Pole, 80-100 Amps 4-Pole, 40-60 Amps 1 1, 1, 1, 1, 1 1 1 1 All All 1, 3R, 12 1, 3R, 12 3R, 3R, 3R, 3R, 12, 12, 12, 12, 4X 4X 4X 4X Mounting Marking Color Cover Interlock Supplied Door Door Door Door Door Direct Direct Direct Direct ON/OFF O/I, ON/OFF O/I, ON/OFF O/I, ON/OFF O/I, ON/OFF O/I O/I O/I O/I Black Black Red/Yel Black Red/Yel Black Black Black Black No Yes Yes Yes Yes — — — — No Yes Yes Yes Yes Yes Yes Yes Yes O/I, ON/OFF O/I, ON/OFF Black Red/Yel Yes Yes Yes Yes Mount Mount Mount Mount Door Door Padlockable List Price $ LBR Type Rotary Shafts Catalog No Length In. (mm) For Standard Duty Handles LBRS040 1.57 (40) LBRS050 1.97 (50) LBRS055 2.17 (55) LBRS080 3.15 (80) LBRS120 4.72 (120) LBRS180 7.09 (180) LBRS305 12.00 (305) For Heavy Duty Handles CFSS5200H 7.9 (200) CFSS5400H 15.7 (400) List Price $ Rotary Shafts 25 Amp, 4th Pole Used on Catalog No Catalog No LBR3025 LBRP25 LBR3025D LBRP25D List Price $ LBR Type Toggle Switch Cover Plate Auxiliary Switch Kits Used on Rotary Switch LBR3025 LBR3025D LBR3040, LBR3060 LBR3080, LBR3100 Catalog Number LBRA25 LBRA25D LBRA1 LBRA2 Contact Arrangement 1 NO & 1 NC 1 NO & 1 NC 1 NO/1 NC with common point 1 NO/1 NC with common point List Price $ Used on Toggle Switches LBT3040, LBT3060 LBT3080,LBT3100 LBT4040 cover interlock defeat mechanism provided. To eliminate cover interlock, order additional catalog number LBRDC1. LBRH2 is IP54 rated. All others are IP65. Ratings 15.1A resistive at 250V AC max. .5A at 125V DC .25A at 250V DC .5 HP at 250V AC max. 18/18 Catalog Number LBTCP1 LBTCP2 LBTCP3 List Price $ LBR Type Rotary Switch Door Mounting Kit (For use with LBRH3 & LBRH4 only) Used on Rotary Switch Catalog Number 40-100 Amps List Price $ LBRD1 LBR/LBT Neutral Kit Used with Catalog Number All No Toggle Switch Cover Plates Rotary Switch Direct Mount Handles Auxiliary switch contacts break about 30 Ms before and make about 3 Ms after main switch contacts. Lug wire ranges: HF63CX —(1) #14-2 AWG 60/75°C Cu only Product Category: HDSS Catalog Number HF63CX List Price $ Only door mountable and for use with LBRH3 & 4 handles only. door mounting of 40–100A LBR switches use door mounting kit LBRD1 & LBRH3 or 4 handle. For Siemens Industry, Inc. Industrial Controls Catalog Switches Disconnect Switches Compact Non-Fusible — Rotary and Toggle Dimension Drawings and Wire Ranges Dimension J Minimum Dept h햲 3.15 in. (80 mm) Switch 1.38 in. (35 mm) 2.92 in. (74 mm) 1.77 in. (45 mm) 0.20 in. (5 mm) 0.87 in. (22 mm) 1.54 in. (39 mm) Dimension J LBR 40-100A 3.35 (85) 3LD2 25 & 32A Front Shaft Mounted 3LD2 63 Front Shaft Mounted 3LD2 25 &32A Front 4-hole Mounted 3LD2 63A Front 4-hole Mounted 3LD2 100 & 125A Front 4-hole Mounted 3.07 (78) 3.35 (85) 2.13 (54) 2.48 (63) 2.56 (65) 3LD2 25 & 32A Base w/shaft Mtg. Handle 3LD2 63A Base w/shaft Mtg. Handle 3LD2 25 & 32A Base w/4-hole Mtg. Handle 3LD2 63A Base w/4-hole Mtg. Handle 3LD2 100 & 125A Base w/hole Mtg. Handle 6.46 (164) 6.77 (172) 5.59 (142) 5.99 (152) 6.07 (154) 0.71 in. (18 mm) J 2.24 in. (57 mm) 1.42 in. (36 mm) 햲 C A E F 2.76 in. (70 mm) 3.35 in. (85 mm) Minimum Depth D 0.16 in. (4 mm) 햲 G B LBR 3025 H 0.31 in. (8 mm) Wire Ranges 60/75°C Cu only 25 Amps LBR (1) #14 - #10 AWG Solid (1) #14 - #8 AWG Stranded 40 & 60 Amps LBR & LBT (1) #14 - #10 AWG Solid (1) #14 - #4 AWG Stranded UP to (4) #12 AWG Solid Up to (3) #12 AWG Stranded Up to (6) #14 AWG Stranded Up to (4) #14 AWG Stranded with (1) #10 AWG Stranded 80 & 100 Amps LBR & LBT 25A, 3LD21 32A, 3LD22 63A, 3LD25 100, 125A, 3LD2 (1) #14 - #10 AWG Solid (1) #14 - #1 AWG Stranded (2) #6 AWG Stranded Up to (3) #8 AWG Stranded Up to (6) #10 AWG Stranded Up to (6) #12 AWG Solid (1) (1) (1) (1) #14-8 #14-8 #14-6 #12-1 Drilling Pattern .125 (3.2) LBR 40-100 Amps & 3LD2 25-125A 3.00 in. (76 mm) Minimum Depth .95 (24.1) C .877 (22.5) A E F D Shaft Mounted 3LD2 Handle Cutout 0.16 in. (4 mm) G B AWG AWG AWG AWG H 0.31 in. (8 mm) LBT Toggle — 40-100 Amps Switch Type Dimensions Inches (mm) Switch Catalog Number A B C Rotary Rotary Rotary Rotary Rotary Rotary Front Mtg. Rotary Front Mtg. Rotary Front Mtg. LBR3040 LBR3060 LBR3080 LBR3100 LBR4040 3LD21 & 2 햳 3LD25 햳 3LD27 & 8 2.00 2.00 2.09 2.09 2.42 1.81 2.36 2.40 2.72 2.72 2.92 2.92 2.72 1.97 2.32 2.40 Rotary Base Mtg. Rotary Base Mtg. Rotary Base Mtg. 3LD21 & 2 3LD25 3LD27 & 8 1.81 (46) 2.36 (60) 2.80 (71) 2.17 (55) 2.52 (64) 3.27 (83) 2.29 (58) 2.68 (68) 2.76 (70) — — — Toggle Toggle Toggle Toggle Toggle LBT3040 LBT3060 LBT3080 LBT3100 LBT4040 2.00 2.00 2.09 2.09 2.42 2.72 2.72 3.32 3.32 2.72 2.75 2.75 2.90 2.90 2.75 1.78 1.78 1.97 1.97 2.28 햲 Depth from outside of cover to back of switch. Siemens Industry, Inc. Industrial Controls Catalog (51) (51) (53) (53) (61) (46) (60) (61) (51) (51) (53) (53) (61) 2.72 2.72 3.32 3.32 2.72 2.17 2.52 3.27 (69) (69) (84) (84) (69) (55) (64) (83) (69) (69) (84) (84) (69) D (69) (69) (74) (74) (69) (50) (59) (61) (70) (70) (74) (74) (70) 1.78 1.78 1.97 1.97 2.28 — — — E (45) (45) (50) (50) (58) 2.16 2.16 2.29 2.29 2.16 — — — F (55) (55) (58) (58) (55) — — — (45) (45) (50) (50) (58) 2.16 2.16 2.29 2.29 2.16 1.67 1.67 1.69 1.69 1.67 — — — G (42) (42) (42) (42) (42) — — — (55) (55) (58) (58) (55) 1.67 1.67 1.69 1.69 1.67 1.50 1.50 1.66 1.66 1.50 — — — H (38) (38) (42) (42) (38) — — — (42) (42) (42) (42) (42) 1.50 1.50 1.66 1.66 1.50 1.22 1.22 1.66 1.66 1.22 — — — (31) (31) (42) (42) (31) — — — (38) (38) (42) (42) (38) 1.22 1.22 1.66 1.66 1.22 (31) (31) (42) (42) (31) 햳 Handle front plate dimensions: 3LD21 & 2—2.64 inches square 3LD25, 7 & 8—3.55 inches square 18/19 Switches Disconnect Switches Type VBII (30-600A) with Flange Mounted Operating Handle Features ▪ 30-600A, 600VAC and DC ratings ▪ UL Recognized (file # E121152 vol. 3) and CSA Certified under file number 154852 ▪ Visible blade quick make and break switching action ▪ Panel and Flange mounted assemblies facilite installation ▪ Panel mounted switches are variable depth VBFS361, VBLK1 & VBH1 ▪ Short circuit rating of 10,000 AIC with class H fuse, and of 200,000 AIC with class R or J fuses ▪ Flange mounted handles rated as either Type1, 3R & 12 or 4X are padlockable in the off position with up to (3) padlocks with 5/16 hasps ▪ Meets UL98 requirements and suitable for both main and branch circuit applications VBFS363F ▪ A complete line of aux contacts are available ▪ Load break and horsepower rated ▪ Defeatable cover interlock standard with all handles ▪ Meets NFPA79 requirements ▪ Seismec qualified – complies with 2007 California Building Code (CBC)–Zone 4 VBNFS366, VBLK4 & VBH2R Ordering Information 1. Determine the ratings required (amps, volts, HP, Fusible, NF), the mounting needed (Panel or Flange), and select the appropriate switch. 18/20 2. For panel mounted switches with a rigid operating shaft (30-600A), order panel mounted switch flange mounted operating handle & rigid linkage kit based on depth required. 3. For panel mounted switches with a Max-Flex operator, order panel mounted switch, Max-Flex Handle & Adapter Kit and drive cable. 4. Select accessories if required. Siemens Industry, Inc. Industrial Controls Catalog Switches Disconnect Switches Type VBII Switch, Handle and Linkage Kit Selection Switches Switch Ampere Rating Horsepower Rating, Switches and 3-Phase햵 Max. AC Voltage Rating 240 Volts AC Catalog Number Standard 480 Volts AC Max. Standard 600 Volts AC Max. Standard Max. 600 Volts DC (max)햵 List Price $ Fusible Panel Mounted Variable Depth Switches - 3-Pole햶 30 60 30 60 100 200 400 600 240 240 600 600 600 600 600 600 VBFS321 VBFS322 VBFS361 VBFS362 VBFS363 VBFS364 VBFS365 VBFS366 3 7 1/2 — — — — — — 7 1/2 15 — — — — — — — — 5 15 25 50 100 150 — — 15 30 60 125 250 400 — — 7 1/2 15 30 60 125 200 — — 20 50 75 150 350 500 —햲 —햳 15 햴 30 햴 50 햴 50 —햺 —햺 Non-fusible Panel Mounted Variable Depth Switches - 3-Pole햶 30 60 100 200 400 600 600 600 600 600 600 600 — — — — — — 10 20 40 60 125 200 — — — — — — 20 50 75 125 250 400 — — — — — — 30 60 100 150 300 500 15 햴 30 햴 50 햴 50 —햺 —햺 3 7 1/2 — — — — 7 1/2 15 — — — — — — 5 15 50 100 — — 15 30 60 125 — — 7 1/2 15 30 60 — — 20 50 75 150 —햲 —햳 15 햴 30 햴 50 햴 50 10 20 40 60 — — — — 20 50 75 125 — — — — 30 60 100 150 15 30 50 50 VBNFS361 VBNFS362 VBNFS363 VBNFS364 VBNFS365 VBNFS366 Fusible Flange Mounted Switches - 3-Pole햷 30 60 30 60 100 200 240 240 600 600 600 600 VBFS321F VBFS322F VBFS361F VBFS362F VBFS363F VBFS364F Non-fusible Flange Mounted Switches - 3-Pole햷 30 60 100 200 600 600 600 600 VBNFS361F VBNFS362F VBNFS363F VBNFS364F — — — — 햴 햴 햴 Note: Fusible switches include fuse provisions for Class H Fuses. The load base can be moved to pre-drilled holes for Class J Fuses. If Class R Fuses are required add a Class R Fuse Clip Kit. Flange Mounted Operating Handles Cable Kit For use with Panel Mounted Switches and Rigid Linkage Kits. Included with Flange Mounted Switches as standard. For use with 30-200A panel mounted switches and Max-Flex handle and adapter kit. Catalog Number Description 30-200A Type 1, 3R & 12 FHOEC036 36" long drive cable 30-200A Type 4X FHOEC048 48" long drive cable Catalog Number Handle Assembly Description List Price $ VBH1 VBH14X VBH2 400 Type 1 & 12 VBH2R 400 & 600A Type 1, 3R & 12 VBH24X 400 & 600A Type 4X List Price $ Rigid Linkage Kits For use with Panel Mounted Switches. Not required for Flange Mounted Switches. Catalog Number Switch Ampere Rating VBLK1 VBLK2 30-200 30-200 6.94햹 6.94햹 6.94햹 19.0 VBLK3 VBLK4 400 & 600 400 & 600 9.00 9.00 9.00 19.0 Enclosure Depth햸 Min Max. List Price $ Max-FlexTM Handle and Adapter Kit (Type 1, 12, 3R & 4X) Use with 30-200A panel mounted switches and cable kit. Catalog Number Description VBHM1 30-200A Max-Flex Adapter Kit 햲 List Price $ Rated 5 HP at 250V DC. Rated 10 HP at 250V DC. 600V DC & 600V DC horsepower rating shown requires (2) poles to be connected in series. 햵 Std. - applies when non-time delay fuses are used. Max. - applies when time delay fuses are used. 햳 햴 Siemens Industry, Inc. Industrial Controls Catalog VBNFS361, VBHM1 & FHOEC036 햶 Includes line base, load base, operating mechanism and line and load lugs. Order operating handle and linkage kits from tables on this page. 햷 Complete assembly, includes line base, load base, operating mechanism line and load lugs, operating handle and required linkage. Product Category: HDSS 햸 Dimensions (min. & max.) from enclosure mounting pan to outside surface of enclosure handle mounting flange. 햹 7.12 for 200A switches. 햺 Rated 250V DC Max and 50HP at 250V DC. 18/21 Switches Disconnect Switches Accessories Type VBII HT63 HR612 HN612 Class R Fuse Clip Kits Class T Fuse Adapter Kits 200% Neutral Kits햳 These kits prevent the installation of Class H and K fuses (one kit required per switch). 100-600A fusible switches are field convertible to accept Class T fuses. 400-600A switches are field convertible to accept Class T fuses by moving the load base to a pre-drilled T fuse position. UL listed 200% neutrals are available on 60 & 100A switches. They are typically used with non-linear transformers or where increased neutral ampacity/lug capacity is required. Class R Fuse Clip Kits Catalog Number List Price $ Description Class T Fuse Adapter Kits햲 HR21 30A, 240V Kit (HD only) HR612 30A, 600V Kit/60A, 240V Kit HR62 60A, 600V Kit Catalog Number HR63 100A Kit HT23 100A, 240V Kit HR64 200A Kit HT63 100A, 600V Kit HR656 400A/600A Kit HT24 200A, 240V Kit HT64▲ 200A, 600V Kit List Price $ Description Class J Fuse Provisions Neutral Kits햳 All 30-600A, 600V fusible switches are field convertible to accept Class J fuses by moving the load base to a pre-drilled J fuse position. Standard Neutral Kits can be field installed in 30-100A switches. 200% Neutral Kits Switch Ampere Rating 60 & 100 Kit Catalog List Number Price $ HN263 Wire Range Line & Load Lugs (Cu/Al) (2) #14-1/0 AWG Neutral Kits Switch Ampere Rating 30A 600V, 60A 240V Kit Catalog Number HN612 60A, 600V & 100A HN623 List Price $ Internal Door Latch Kits For use with enclosures with door mounted latching bar. Required when a flange mounted switch is mounted in a Hoffmann or Rittal enclosure provided with an AB cutout. Catalog Number Description DKR2 2 point (for use with enclosures less than 40" high) DKR3 3 point (for use with enclosures 40" or larger in height) List Price $ Window Kits (Type 1, 12, 3R and 4x) Allows viewing of visible blades and of indicating fuses through 200A. Catalog Number Description VBWK1 30A Window Kit VBWK2 60 & 100A Window Kit VBWK3 200-600A Window Kit List Price $ ▲ Built to order. Allow 6–8 weeks for delivery. 햲 One kit per pole required. 햳 UL approved (not CSA certified). 18/22 Product Category: HDSS Siemens Industry, Inc. Industrial Controls Catalog Switches Disconnect Switches Type VBII Accessories Auxiliary Contacts The auxiliary contacts are available in 1 normally open and 1 normally closed or 2 normally open and 2 normally closed configurations. Siemens offers a PLC Auxiliary Switch (30 -200A) that has very low resistance for low voltage and current typical in PLC circuits. All auxiliary contacts make after and break before main switch contacts. HA161234 Switch Ampere Rating Aux. Switch Catalog List Number Price $ Kit Ampere Rating 125V AC Max. 250V AC Max. Kit Horsepower Rating 28V DC 125V AC Max. Max. 250V AC Max. 28V DC Max. With 1 NO & 1 NC Isolated Contacts 30-200 HA161234 10 10 — 1/2 3/4 — 400-600 HA165678 10 10 — 1/2 3/4 — With 2 NO & 2 NC Isolated Contacts 30-200 HA261234 10 10 7 1/2 3/4 — 400-600 HA265678 10 10 7 1/2 3/4 — Low Current PLC Type with 1 NO & 1 NC Gold Plated Contacts 30-200 HA361234 10 10 — 1/2 3/4 — 400-600 HA365678 10 10 — 1/2 3/4 — HA261234 Fuse Puller Kits Fuse Puller Kits are field installable in 30-100A Type VBII Heavy Duty Switches (one kit required per 3 pole switch). Switch Ampere Rating 030 Fuse Puller Kit Catalog Number HP61 060 HP62▲ 100 HP63▲ List Price $ HP61 Copper Lug Kits All switches are UL approved to accept field installed copper lug kits. Switch Ampere Rating 30–60 Copper Lug Catalog List Number Price $ HLC612 Description (9) Lugs/Kit #14-4 AWG Cu 100 HLC63▲ (9) Lugs/Kit #14-1/0 AWG Cu 200 HLC64▲ (9) Lugs/Kit #6 AWG-300 Kcmil Cu 400–600A HLC65678▲ (1) Lugs/Kit #1/0 AWG-600 Kcmil Cu Equipment Ground Kits Equipment Ground Lug Kits are available for all switches. HLC612 Switch Ampere Rating 30–200 Catalog Number HG61234 400 & 600 HG656 List Price $ Number of Terminals 2 Wire Range Per Terminal (Cu/Al) #14-4 AWG 4 #6 AWG-250 Kcmil ▲ Built to order. Allow 6–8 weeks for delivery. Siemens Industry, Inc. Industrial Controls Catalog Product Category: HDSS 18/23 Switches Disconnect Switches Type VBII Lug Wire Ranges & Dimensions Lugs 30 & 60A switches are suitable for use with 60° or 75°C wire. 100–600A switches are suitable for use with 75°C rated wire. All switches are supplied with factory installed line and load lugs. Wire Ranges (Line, Load and Standard Neutral) Switch Ampere Rating 30 60 UL Approved Wire Range Lug Wire Range #14-6 AWG (Cu/AI) #14-2 AWG (Cu/Al) #14-2 AWG (Cu/AI) #14-2 AWG (Cu/Al) 100 #14-1/0 AWG (Cu/Al) #14-1/0 AWG (Cu/Al) 200 #6 AWG-300 Kcmil (Cu/Al) #6 AWG-300 Kcmil (Cu/Al) 400 1/0 AWG-750 Kcmil (Cu/Al) or (2) 1/0 AWG-250 Kcmil (Cu/Al) (1) 1/0 AWG-750 Kcmil (Cu/Al) or (2) 1/0 AWG-250 Kcmil (Cu/Al) 600 (2) 1/0 AWG-750 Kcmil (Cu/Al) or (4) 1/0 -250 Kcmil (Cu/Al) (2) 1/0 AWG-750 Kcmil (Cu/Al) or (4) 1/0 AWG-250 Kcmil (Cu/Al) Approximate Dimensions Mounting bracket shown with handle installed is supplied with Flange Mounted Switches only. All Panel Mounted Switches have a “L” shaped mounting pan with a line base, load base (if fusible) and mechanism installed. Catalog Number A Fusible, Panel Mounted B Dimensions C D (min) D (max) VBFS321 11.88 N/A 7.47 6.94 19 VBFS322 13.12 N/A 8.50 6.94 19 VBFS361 11.88 N/A 7.47 6.94 19 VBFS362 13.12 N/A 8.50 6.94 19 VBFS363 13.12 N/A 8.50 6.94 19 VBFS364 17 N/A 12.33 7.12 19 VBFS365 26.25 N/A 16.50 8.63 19 VBFS366 26.25 N/A 16.50 8.63 19 B A Non-fusible, Panel Mounted VBNFS361 9.79 N/A 7.47 6.94 19 VBNFS362 9.79 N/A 8.50 6.94 19 VBNFS363 9.79 N/A 8.50 6.94 19 VBNFS364 10.77 N/A 12.33 7.12 19 VBNFS365 13 N/A 16.50 8.63 19 VBNFS366 13 N/A 16.50 8.63 19 Fusible, Flange Mounted D VBFS321F 11.88 14.08 7.47 7.27 N/A VBFS322F 13.12 15.83 8.85 7.27 N/A VBFS361F 11.88 14.08 7.47 7.27 N/A VBFS362F 13.12 15.83 8.85 7.27 N/A VBFS363F 13.12 15.83 8.85 7.27 N/A VBFS364F 17 18.20 12.68 7.57 N/A C Non-fusible, Flange Mounted VBNFS361F 9.79 11.78 7.47 7.27 N/A VBNFS362F 9.79 11.78 8.85 7.27 N/A VBNFS363F 9.79 11.78 8.85 7.27 N/A VBNFS364F 10.77 11.97 12.68 7.57 N/A Dimension C for panel mounted switches indicates the minimum width from the left hand edge of the switch mounting pan to the right hand inside surface of the enclosure. 18/24 Siemens Industry, Inc. Industrial Controls Catalog Switches Disconnect Switches Type MCS (30-200A) — Switches, Fuse and No Fuse Kits Features ▪ 30, 60, 100 and 200 Ampere Switches ▪ UL Recognized (file# 121152 vol. 1 & 2) and CSA Certified ▪ Simple Mounting — with an integral switch and over center mechanism ▪ Horsepower & load break rated ▪ Compact Size ▪ Visible Blade Contacts ▪ Rugged Construction — with a short circuit current rating of 10,000 amps with Class H or 200,000 amps at 600V maximum AC, when fused with Class R or Class J fuses Type MCS Disconnect Switch with Max-Flex™ handle operator Type MCS Disconnect Switch with fixed-depth, flange-mounted handle Type MCS Disconnect Switch with rotary handle Ordering Information 1. Select the basic switch size you need (30, 60, 100 or 200 ampere). 2. Check the switch selected against the maximum horsepower rating required for your application. “L” or “R” suffix on ▪ Available with three operator handle options, allowing flexible placement of switch ▪ Field Installable Auxiliary Contacts ▪ Flexible Fuse Class Configurations 18/26 for installation space requirements. 5. Select from the list of handle operators, the type which best suits your application. Handle operators can be selected from the next page. switch catalog numbers denotes left or right-handed mechanism drive. 3. Choose either fuse or no fuse kit from chart below.ng Information 4. Check “Minimum Dimensions” on page Basic Switches Maximum Horsepower Rating, 3 Phase햵 Maximum Voltage Rating Catalog Number Right Hand Catalog Number Left Hand 240 Volts AC Switch Ampere Rating Standard Fuse Time Delay Fuse 130 600 MCS603R MCS603L 13 160 600 MCS606R MCS606L 171⁄2 MCS610L▲ 15 MCS620L▲ 25 100 600 MCS610R 200 600 MCS620R 480 Volts AC 600 Volts AC Time Delay Fuse 250 Volts DC (max)햵 Standard Fuse Time Delay Fuse Standard Fuse 171⁄2 15 115 171⁄2 120 15 15 15 130 15 150 10 30 25 160 30 175 20 60 50 125 60 150 40 List Price $ Fuse And No Fuse Kits (Includes load base plus line and load fuse clips)햲 Basic Switch Ampere Rating 130 160 100 200 No Fuse Kits Switch Catalog Number Kit Description For Class H Cu Only햳 Standard Std List Price $ Catalog Number List Price $ Catalog Number No Fuse MCS603R 30A, 250V or 30A, 600V MCS603L 60A, 250V 60A, 600V TMK606 — — — — — — — — — — — — — — — FCK203▲ FCK206 FCK206 FCK606 — — — — — No Fuse MCS606R 60A, 250V or 60A, 600V MCS606L 100A, 250V 100A, 600V TMK606 — — — — — — — — — — — — — — — FCK206 FCK606 OFCK661▲ OFCK661▲ — — — — — No Fuse MCS610R 100A, 250V or 100A, 600V MCS610L 200A, 250V 200A, 600V TMK610 — — — — TMK610C — — — — — — — — — FCK610 FCK610 OFCK620 OFCK620 — — — — — No Fuse MCS620R 200A, 250V or 200A, 600V MCS620L TMK620 — — — — — FCK620 FCK620 — — — TMK620C▲ — — ▲ Built to order. Allow 6–8 weeks for delivery. 햲 For “copper only” connectors, order as follows: Fusible—order standard switch, standard fuse kit and copper only no fuse kit. Siemens Industry, Inc. Industrial Controls Catalog List Price $ For Class J Catalog Number 햲 Std List Price $ — — FCJK603 — FCJK606 — — 햲 — — — FCJK606 OFCK661▲ OFCK661▲ — — — FCK610 FCK610 OFCK620 OFCK620 — — FCK620 FCK620 — Non-Fusible—order standard switch and copper only no fuse kit. 햳 Includes both line and load lugs. 햴 For Class R fuses order Class H kit from this table and the Class R conversion kit from the next page. Product Category: HDSS For Class R Catalog Number 햵 Catalog Number Std List Price $ — FCRK203 FCRK206 FCRK206 FCRK606 — — FCRK206 FCRK606 — 햲 햴 햴 — 햴 햴 햴 햴 — 햴 햴 Lug Wire Size #14 to #4 AWG Cu/AI — — — — — — — — — — #14 to #4 AWG Cu/AI #14 to #2/0 AWG Cu/AI #6 to 300 kcmil Cu/AI HP ratings for time delay fuses and for 250V DC also apply to Non-fusible switches. 18/25 Switches Disconnect Switches Type MCS (30-200A) Auxiliary Switch Kits Class R Fuse Conversion Kits Contact Arrangement 1 NO/1 NC Switch Catalog Number Catalog Number MCS603R MCS603L MCS606R MCS606L MCS610R MCS610L MCS620R MCS620L MCSAKR136 MCSAKL136 MCSAKR136 MCSAKL136 MCSAK116 MCSAK116 MCSAK126 MCSAK126 2 NO/2 NC List Price $ Catalog Number List Price $ MCSAKR236 MCSAKL236▲ MCSAKR236 MCSAKL236▲ MCSAK216 MCSAK216 MCSAK226 MCSAK226 Fuse Clip Rating Catalog Number 100A, 600V 200A, 600V SSRK33 SSRK34 List Price $ Fuse Ejector Kits Handle Operators Switch Catalog Number Fuse Ejector Kit Catalog Number MCS610 MCS620 FE100▲ FE200▲ List Price $ Fixed Depth, Flange Mounted, Types 1, 3, 3R, 12 Switch Catalog Number Complete Handle Mechanism Handle Only Catalog Number Catalog Number MCS603R MCS603L MCS606R MCS606L MCS610R MCS610L MCS620R MCS620L FDFS06R FDFS06L FDFS06R FDFS06L FDFS06R FDFS06L FDFS20R FDFS20L List Price $ Switch Operator Only List Price $ Catalog Number FDH10 FDH10 FDH10 FDH10 FDH10 FDH10 FDH20 FDH20 List Price $ FDS06R FDS06L FDS06R FDS06L FDS06R FDS06L FDS20R FDS20L Variable Depth, Flange Mounted Max-Flex™, Types 1, 3, 3R, 12 Switch Catalog Number Complete Handle Mechanism Handle Only Catalog Number Catalog Number MCS603R MCS603L MCS606R MCS606L MCS610R MCS610L MCS620R MCS620L FHOS06036R FHOS06036L FHOS06036R FHOS06036L FHOS06036R FHOS06036L FHOS20036R FHOS20036L List Price $ List Price $ FHOHS FHOHS FHOHS FHOHS FHOHS FHOHS FHOHS FHOHS Switch Operator Only Cable Only Catalog Number Catalog Number List Price $ FHOS06R FHOS06L FHOS06R FHOS06L FHOS06R FHOS06L FHOS20R FHOS20L FHOEC036 FHOEC036 FHOEC036 FHOEC036 FHOEC036 FHOEC036 FHOJC036 FHOJC036 RHOS06 RHOS06 RHOS06 RHOS20 RHOSVD RHOSVD RHOSVD RHOSVD List Price $ Variable Depth Rotary, Through-The-Door-Mounted, Types 1, 12 Variable Depth MCS603R MCS606R MCS610R MCS620R Shaft Only Variable Depth CRHOS06VD CRHOS06VD CRHOS06VD CRHOS20VD CRHOH CRHOH CRHOH CRHOH MCS Disconnect Switch Panel Space Requirements Panel Space Requirements Minimum Dimensions (inches*) Switch Catalog Number Size 30A/240V MCS603 30A/600V 30A/600V 60A/240V MCS606 60A/600V 60A/600V 100A/240V MCS610 100A/600V 100A/600V 200A/240V MCS620 200A/600V 200A/600V ▲ Built to order. Allow 6–8 weeks for delivery. For Type 4 and 4X applications, order handle only Catalog Number 100A - FDH104 (list price $ ) 200A - FDH204 (list price $ ) For Type 4 and 4X applications, order handle only Catalog Number FHOHS4, List Price $ 18/26 “A” 6.13 6.13 6.13 6.13 6.13 6.13 7.38 7.38 7.38 9.17 9.17 9.17 “B” 5.52 5.52 5.52 5.52 5.52 5.52 7.59 7.59 7.59 9.00 9.00 9.00 “C” 8.11 10.11 8.48 7.86 10.38 8.35 11.85 13.85 10.6 14.7 17.2 13.32 Standard Fuse Class H, K, R H, K, R J H, K, R H, K, R J H, K, R H, K, R J H, K, R H, K, R J cable length is 36 inches. Alternate lengths are available as follows: Length Amps Cat. No. List Price $ 48" 30–100 FHOEC048 60" 30–100 FHOEC060 48" 200 FHOJC048 60" 200 FHOJC060 Product Category: HDSS “A” – Dimension is measured from each cross bail pin. “B” – Dimension is measured from line side barrier to load side barrier. “C” – Dimension is measured from line side terminal of switch to load side terminal of fuse load base. For Type 4 and 4X applications, order handle only Catalog Number RHOH4, List Price $ Type 3 and 3R applications, order handle only Catalog Number RHOH, List Price $ Min. enclosure depth from mounting pan to handle mounting surfaces: 30-100A 6.44 Inches 200A 10.93 Inches *For millimeters multiply inches by 25.4. For Siemens Industry, Inc. Industrial Controls Catalog Switches Disconnect Switches Type CFS Compact Fusible Switches Features ▪ 30–800A ratings ▪ UL Listed & CSA Certified ▪ IEC 60 947-3 Certified & CE marked ▪ Door mounted rotary handles with defeatable cover interlock ▪ Meets UL requirements for both main and branch circuit applications Switch CFS363JN with (2) CFSAUX1NO ▪ Compact size ▪ 65 or 100KA with Class CC fuses or up to 200KA with Class J fuses ▪ Load break and horsepower rated ▪ Quick make and break operation ▪ All handles are padlockable with up to (3) padlocks with 5/16" hasps in the OFF position Shaft Handle CFSS10200HN CFSH10BL12N ▪ Catalog number CFS361C5, CFS361J5 & CNFS361 can be DIN-rail mounted and can be either front or side operated with standard rotary handles ▪ Handles are available in Type 1, 3R, 4/4X & 12 ratings ▪ NFPA 79 field installed kits are available Lugs/Accessories CFSL200 Ordering Information 1. Select the panel mounted switch required based on Ampere, HP and AIC requirements. Switches with a right hand mechanism are standard. 30-100A switches with a left hand mechanism are available. 2. Select handle based on environmental rating required. 3. Select operating shaft (200 or 400mm in length). For enclosure depths of 9.0" or less from panel mounting surface to inside of door use 200mm long shafts. For deeper enclosures use 400mm long shafts. 30A 65kA switches can be used in 10" deep enclosures (panel to inside of door) with 200mm shaft and CFSH5N handles. Note: Be sure to check shaft and handle compatibility with the switch selected by using the information provided in the selection tables. 4. Line & load lugs are provided as standard on 30–100A switches. Terminal kits are available for 200–800A switches if needed. 5. Auxiliary contacts are available if needed as follows: A. 30A, 65kA switch CFS361C5 and non-fusible 30A switch CNFS361 will accept up to (4) aux contacts. B. 30A, 65kA switch CFS361J5 will accept up to (2) aux contacts without an aux contact holder. If more than (2) aux contacts are required order aux contacts PLUS aux contact holder kit CFSAUXH1. All other switches will accept up to (4) aux contacts. 6. If non-fusible switch is required order a shorting bar for 60-600A switches or catalog number CNFS361 for 30A. 7. 30–100A switches are designed to prevent inadvertent contact with live parts and shields are not required. 200–800A switches are supplied as standard with line shields and terminal shroud kits are available for the load side. Note: Availability of new style 200 & 400A switches, catalog numbers CFS364JN & CFS365JN to be announced. Siemens Industry, Inc. Industrial Controls Catalog 18/27 Switches Disconnect Switches Type CFS Compact Fusible Switches Fusible Switches, 3-Pole 600V AC Max, 250V DC Max (CFS364JN & CFS365JN availability to be announced) Max Horsepower Ratings Switch Ampere Rating Catalog Number Fuse Provisions Provided List Price $ 240V 3Ø AC 480V 3Ø AC 600V 3Ø AC 250V DC 20 20 20 20 20 50 50 75 150 350 500 500 5 5 5 5 5 10 10 20 40 50 — — 20 50 75 5 10 20 AC Short Circuit Rating Standard - with Right Hand Mounted Mechanism 30 30 30 30 30 60 60 100 200 400 600 800 CFS361C5 CFS361J5 CFS361CN CFS361JN CNFS361 CFS362JN1 CFS362JN CFS363JN CFS364JN CFS365JN CFS366J CFS367L Class CC Class J Class CC Class J None Class J Class J Class L 7.5 7.5 7.5 7.5 7.5 15 15 30 60 125 200 200 15 15 15 15 15 30 30 60 125 250 400 400 65kA 65kA 100kA 200kA 65kA 100kA CFS361J5 200kA 200kA Optional - with Left Hand Mounted Mechanism 30 60 100 CFS361JLN CFS362JLN CFS363JLN 7.5 15 30 Class J 15 30 60 200kA Operating Shafts for 30–400A switches Catalog Number CFSS5200N Shaft Length In. (mm) 7.9 (200) List Price $ CFSS5400N 15.7 (400) CFSS5200HN 7.9 (200) CFSS5400HN 15.7 (400) CFSS10200HN 7.9 (200) CFSS10400HN 15.7 (400) CFSS5400N Switch & Handle Compatibility 5mm x 5mm for use with CFS361C5, CFS361J5 & CNFS361 switches & with “CFSH5” handles only 5mm x 5mm for use with all “CFSH10” handles & with CFS361C5, CFS361J5 & CNFS361 switches only 10mm x 10mm for use with all “CFSH10” handles & with all 30–400A switches except CFS361C5, CFS361J5 & CNFS361 Rotary Operating Handles—Door Mounted (for use with 65kA CFS361C5, CFS361J5 & CNFS361 switches only) Catalog Number CFSH5B12N CFSH5R12N List Price $ CFSH5B4N CFSH5R4N Color Blue & Black Yellow & Red Blue & Black Yellow & Red UL Type Operating Shaft Compatibility 1, 3R & 12 CFSS5200N or CFSS5400N 1, 3R, 12 & 4/4X CFSH5B12N Rotary Operating Handles—Door Mounted (for use with CFSS5200HN, CFSS5400HN, CFSS10200HN & CFSS10400HN) Catalog Number Type 1, 3R & CFSH10B12N List Price $ 12 Color Description Blue & Black CFSH10R12N Heavy duty pistol grip Yellow & Red (2.75" long for use with 30A switches & CFS362JN1) CFSH10BL12N Blue & Black CFSH10RL12N Yellow & Red Heavy duty pistol grip (4.92" long for 30–400A switches) Type 1, 3R, 4/4X & 12 CFSH10B4N Blue & Black CFSH10R4N Yellow & Red CFSH10BL4N Blue & Black CFSH10RL4N Yellow & Red Line Heavy duty pistol grip (2.75" long for use with 30A switches & CFS362JN1) Heavy duty pistol grip (4.92" long for 30–400A switches) and load lugs included. and load lugs are not included. Order from table on next page if required. DC HP rating shown requires (2) poles to be connected in series. Line 18/28 DC HP rating shown requires (3) poles to be connected in series. numbers CFS361C5 & CFS361J5 accept 5mm x 5mm operating shafts. All other 30–400A switches accept 10mm x 10mm operating shafts. Catalog Product Category: HDSS Compact pistol grip design (2.75" long) with defeatable cover interlock. Cover can be opened when handle is padlocked in the OFF position. Defeatable cover interlock provided. Cover cannot be opened when handle is padlocked in the OFF position. Catalog number CNFS361 is a non-fusible switch. 4-Pole 600 & 800A switches, CFS466J & CFS467L are also available. Siemens Industry, Inc. Industrial Controls Catalog Switches Disconnect Switches Type CFS Compact Fusible Switches 600 & 800A Rotary Operating Handles—Door Mounted (8.27" long)햸 Catalog Number CFSH12BL12 CFSH12RL12 CFSH12BL4 CFSH12RL4 List Price $ Color Blue & Black Yellow & Red Blue & Black Yellow & Red UL Type 1, 3R & 12 1, 3R & 12 1, 3R, 12 & 4/4X 1, 3R, 12 & 4/4X 600 & 800A Operating Shafts (Cross section 12X12 mm) Catalog Number CFSS12200H CFSS12400H List Price $ Enclosure Depth (switch mounting surface to door OD) 10.43 — 16.68 inches 10.43 — 19.84 inches Shaft Length In. (mm) 12.59 (320) 15.75 (400) CFSL200 & 400 Type CFS Fusible Switch Accessories Catalog Number List Price $ Description Terminals햲 CFSL200 200A Lug Kit (6 lugs per kit) (1)#6–3/0 CFSL400N 400A Lug Kit (6 lugs per kit) (1)#2–600kcmil CFSL400 600–800A Lug Kit (6 lugs per kit) (2)#2–600kcmil Shorting Bars (no fuse kits) CFSSB60 60A Shorting Bar Kit (3 links per kit) CFSSB100 100A Shorting Bar Kit (3 links per kit) CFSSB200 200A Shorting Bar Kit (3 links per kit) CFSSB400 400A Shorting Bar Kit (3 links per kit) CFSSB680 600 & 800A Shorting Bar Kit (1 link per kit) CFSAUX1NC Auxiliary Contacts (NEMA ratings AC A600 DC N600) CFSAUXH1햳 Aux Contact Holder (30A 50kA Sws) CFSAUX1NO Aux Contact 1 NO (30–800A Sws) CFSAUX1NC Aux Contact 1 NC (30–800A Sws) CFS11AUX 1NO, 1NC Aux Contact Kit for use with CFSNFPA2N & 3N (side mount) CFS22AUX 2NO, 2NC Aux Contact Kit for use with CFSNFPA2N & 3N (side mount) Terminal Shrouds (line or load) CFST200N햷 200A Shroud Kit (Line or load 3-Pole kit) CFST400N햷 400A Shroud Kit (Line or load 3-Pole kit) CFSTS680햷 600/800A 3-Pole Shroud Kit CFSTS6804햷 600/800A 4-Pole Shroud Kit 30A Compact Switch Kits CFSPLK Shaft Padlocking Kit for 30A Compact Switch when door is open햴 CFSH5CDM Direct Mount Handle Kit for CFS361C5 CFSH5JDM Direct Mount Handle Kit for CFS361J5 CFS5B100 – 400 NFPA 79 Kits Kits provide an operating shaft suitable for use with all heavy duty handles (not for use with CFSH5 handles). Kits also provide an internal operating handle & an internal OFF padlocking provision. CFSNFPA1햵 For use with CFS361C5, CFS361J5 & CNFS361 CFSNFPA2N햶 For use with CFS361JN, CFS361CN, CFS362JN & CFS363JN CFSNFPA3N For use with CFS364JN & CFS365JN Note: CFSNFPA2N & CFSNFPA3N cannot be used in combination with CFSAUX1NO or CFSAUX1NC auxiliary contacts. 햲 햳 Supplied as standard on 30–100A switches. CFS361C5 and CNFS361 will accept (4) aux contacts without an aux contact holder. CFS361J5 will accept (2) aux contacts without an aux contact holder. Siemens Industry, Inc. Industrial Controls Catalog 햴 Supplied as standard on all but 30A compact switches. 12.6 inch (320 mm) long operating shaft included. 11.3 inch (288 mm) long operating shaft included. 햷 Line side terminal shrouds supplied with switch. 햵 햶 Product Category: HDSS 햸 Defeatable cover interlock provided. Cover cannot be opened when the handle is padlocked in the OFF position. 18/29 Switches Disconnect Switches Type CFS Compact Fusible Switches UL & CSA Technical Characteristics and Panel Space Requirements Panel Space Requirements – Inches (mm) Catalog Number Amps Fuse Class AC Short Circuit Rating Electrical Endurance Mechanical Endurance Height Width Depth햲 CFS361C5 30 CC 65kA 6000 10000 4.56 (116) 3.78 (96) 6.00 (152) CFS361J5 30 J 65kA 6000 10000 4.56 (116) 4.15 (96) 6.00 (152) CFS361CN 30 CC 100kA 6000 10000 5.87 (149) 4.92(125) 6.00 (152) CFS361JN 30 J 200kA 6000 10000 5.35 (136) 5.89 (150) 6.00 (152) CFS361JLN 30 J 200kA 6000 10000 5.35 (136) 5.89 (150) 6.00 (152) CNFS361 30 None 65kA 6000 10000 4.56 (116) 3.78 (96) 6.00 (152) CFS362JN1 60 J 100kA 6000 10000 5.35 (136) 5.89 (150) 6.00 (152) CFS362JN 60 J 200kA 6000 10000 7.32 (186) 5.89 (150) 6.00 (152) CFS362JNL 60 J 200kA 6000 10000 7.32 (186) 5.89 (150) 6.00 (152) CFS363JN 100 J 200kA 6000 10000 7.32 (186) 5.89 (150) 6.00 (152) CFS363JNL 100 J 200kA 6000 10000 7.32 (186) 5.89 (150) 6.00 (152) CFS364JN 200 J 200kA 6000 8000 11.46 (291) 7.72 (196) 6.00 (152) CFS365JN 400 J 200kA 1000 6000 15.35 (390) 10.19 (259) 8.00 (203) CFS366J 600 J 200kA 1000 5000 11.81 (300) 14.33 (364) 11 (280) CFS466J 600 J 200kA 1000 5000 11.81 (300) 18.03 (458) 11 (280) CFS367L 800 L 200kA 500 3500 11.81 (300) 14.33 (364) 11 (280) CFS467L 800 L 200kA 500 3500 11.81 (300) 18.03 (458) 11 (280) Wire Ranges Line & Load Lugs Switch Ampere Rating UL Approved Wire Size (75°C) Mechanical Wire Range of Lug (75°C) 30 #6–10 Cu #14–10 Cu 60 #6–10 Cu #10–3 Cu 100 #12–1 Cu #12–1 Cu 200 #3/0 Cu #6–3/0 Cu/Al 400 (1) 500 or 600 kcmil Cu (1)#2–600 kcmil Cu/Al 600 (2) 350 kcmil Cu (2)#2–600 kcmil Cu/Al 800 (2) 600 kcmil Cu (2)#2–600 kcmil Cu/Al 햲 Minimum dimension from mounting surface to inside of cover. Dimensions shown can be decreased if aux contacts are not required. 18/30 Siemens Industry, Inc. Industrial Controls Catalog

Switches - Siemens

Rating

Date

Size

Views

Categories

Share

Transcript

Forgot your password?.