Transcript

TJ100ME

STM-1/4/16 Multi-Service Provisioning Platform

The TJ100ME is an ultra-compact, carrier class, and cost effective bandwidth provisioning equipment designed to manage and deliver services from the optical core to the access. The product supports end-to-end provisioning and management of services across all segments of the optical network. It combines innovative optical networking software with the resilience of SDH to deliver a flexible solution to today's service providers. The TJ100ME can be configured as a Terminal Multiplexer (TMUX), Add-Drop Multiplexer (ADM), Regenerator, and In-Line Amplifier or as stand-alone Cross-Connect. A variety of service interfaces such as E1/DS1, E3/DS3, STM-1e/o and 10/100/1000 Mbps Ethernet tributary interfaces and trunk interfaces at STM1/4/16 rates are supported. The product features nonblocking cross-connect at VC-3, VC-4 and VC-12 granularity and supports drop and continue functionality. As transmission networks are gradually being dominated by data traffic, TJ100ME provides 10/100/1000 Ethernet interface to efficiently carry inter-office data traffic from a corporate LAN, traffic from an ISP, DSL or cable networks.

Features
Compact size

Advantages
Half depth rack allows two TJ100MEs to be placed back-toback on a standard rack Provision both voice and data services from the same platform. Efficient use of transport bandwidth by supporting per-port rate adaptive Ethernet Services Guaranteed availability and superior network resilience

Benefits
Better utilization of available rack space Future-proof architecture protecting investment

Integrated multi-service delivery

Redundant Cross connect and Power supply cards with hot insertion capability

Carrier-class redundancy and high network uptime with minimum loss of revenue Creation of differentiated services to enhance the portfolio of service offerings Reduction in operational costs and increase in efficiency through lower provisioning time and operator intervention

Multi-level protection Advanced protection schemes schemes MSP, or SNCP enable you to cater to differing customer protection requirements Advanced networking software with support for open standards such as GMPLS and OSPF Enables automatic topology discovery, shared mesh restoration and Point- and-Click Provisioning (PNCP) User friendly GUI based Network Element Software for local and remote provisioning

079 909 Bangalore 560 078. Ltd. #27-01. 177 Milk Street. 1+1 MSP.784 references • Upgrade through SFP-change Protection • Local and Remote loop back Tributary Interfaces • SDH: SNCP.703) • S/L 1. MSTP. L 4. Boston.813 EthOAM (ITU Y. SDH level alarms BITS interfaces (G. MA 02109 USA Tejas Networks Ltd. India Phone: +91-80-4179 4600/700 Fax: +91-80-4121 4481 .5G(HO/LO). 1st Floor.1731) for SDH-like • In-Line Amplifier OAM and performance monitoring • Internal oscillator capable of supplying • Regenerator a G.28 Modem interface for remote Physical Dimensions Cross-Connect management • Dimensions (H x W x D): 177mm x 445 • Options for 2. G. L16. E3/DS3 Network Management • Data: RSTP.2. • In-band channel control mm x 231 mm 7. S/L • Performance monitoring as per ITU-T • Accepts/ Provides 2 Mbps/2 MHz clock 16.826 and G. non• Power Input: -48 V DC condensing • Power consumption – * Specifications are subject to change without notification Less than 150 W Contact us at: sales@tejasnetworks. #58.1. 3.813 compliant Stratum–3 SEC • Independent pure-packet mode for Aggregate Interfaces ‘TDM to Packet migration’ • SSM support on S1 byte • 1/2 x STM-1/4/16 1310 or 1550 nm Maintenance • External Timing interfaces: Two E1 (ITU-T G.Nagar 3 Phase rd st Visit us at: www. Anson Road.5G (HO/LO) • 10/100 Base-Tx (RJ-45) management • Can be mounted on 19” or 21” or 23” • Fully non-blocking Line-to-Line. ELPS • STM-1o / STM-1e. and 12. Ring • E1/E2 bytes for Express Order wire • PBB-TE based on IEEE 802. Environmental • SNMP interface for NMS Tributary-to-Tributary • Operating Temperature: 0ºC to 50ºC • External Alarm interface and indicators Power Supply • Relative Humidity: Upto to 95 %.P.1.2 Rec.1Qay Network Element Configurations • F1 byte for user data channel • Sub-50ms linear and ring protection • Digital Cross-Connect (DXC) Timing & Synchronization based on ITU-T G.tejasnetworks. interface racks Line-to-Tributary. G.com Tejas Networks Ltd. VC-3 level path protection • STM-16 supports full FCAPS functionality • E1/E3 Tributary Protection • 10/100/1000 Ethernet Interfaces • V. c/o Sandstone Capital. 1 Main Road. ERPS.8031/8032 • Add-Drop Multiplexer (ADM) • Timing & Synchronization of System as • CFM-OAM (IEEE 802.957 compliant) • HO and LO POH. User Data channel and Order wire Carrier-Ethernet Functionality Network Topology • 7 input alarms and 4 output alarms • PBB based on IEEE 802.24/V.com Tejas Communication Pte. L 1.1ag) and ITU-T • Terminal Multiplexer (TMUX) per ITU-T Rec.1. J. STM-4 • TejNES (Networks Element Software) • VC-12. Springleaf Tower. Singapore .Applications Technical Specifications* Alarms.1ah • Linear. MS-SPRing • Remote Software Downloads • E1/DS1. S/L 4. Tributary-to-Line.2.5G(HO/LO).