Transcript
TT-3026L/M/S/D/LM easyTrack Transceiver, Software Interface Reference ManualTT-3000SSA Ship Security Alert System andTT-3000E mini-C GMDSS System Thrane & Thrane A/S TT-3026 easyTrack TransceiverSoftware Interface Reference Manual Copyright Thrane & Thrane A/S ALL RIGHTS RESERVED2006, Thrane & Thrane A/SInformation in this document is subject to change without notice and does not representa commitment on the part of Thrane & Thrane A/S.Document number: 98-116080 Revision: I 1 TT-3026L/M/S/D/LM easyTrack Transceiver, Software Interface Reference ManualTT-3000SSA Ship Security Alert System andTT-3000E mini-C GMDSS System SAFETY SUMMARY The following general safety precautions must be observed during all phases of operation, service and repair of this equipment. Failure to comply with theseprecautions or with specific warnings elsewhere in this manual violates safety standardsof design, manufacture and intended use of the equipmentThrane & Thrane A/S assume no liability for the customer’s failure to comply with theserequirements. MICROWAVE RADIATION HAZARDS During transmission this unit radiates microwaves from the antenna. This radiation maybe hazardous to humans if they are exposed to it directly at short distances from theantenna. During transmission, make sure that nobody is closer than the recommendedminimum safety distance of 0.3 meter. KEEP AWAY FROM LIVE CIRCUITS Operating personnel must not remove equipment covers. Qualified maintenance personnel mustmake component replacement and internal adjustment. Under certain conditions, dangerous voltagesmay exist even with the power cable removed. To avoid injuries, always disconnect power and discharge circuits before touching them. 2 TT-3026L/M/S/D/LM easyTrack Transceiver, Software Interface Reference ManualTT-3000SSA Ship Security Alert System andTT-3000E mini-C GMDSS System REVISION HISTORYRev. Date App. Section Description / Remarks H 2005-07-29 6.2 Section covering Maritime Distress added8.28.21 Command SET –-Q Distress Test Mode added2.5 Occupied pins in a 3026D system9.2 Distress messages added9.10 Distress test messages added8.35.2 Alarm priority added8.28.10 EGC Only disabled8.28.12 Nature of alert table for land mobile andmaritime.8.30.2 Added the ability to clear alert indications.8.9.2 DNID auto-grouping command8.9.7 DNID default auto-grouping command8.9.8 Default reporting protocol command8.9.9 Reporting protocol command App. E Remote TBus 2 interface description removedfrom document.4.16.1 DNID Auto grouping4.18 Data reporting protocol ch choiceI 2005-08-24 8.26.3 Printer statusFigure 4.1 Figure updated to reflect software ver. 2.192.6 GPS section added4.16.1 Auto grouping description updatedTable 7.1 Table updated with new data logging fields8.9.6 Dn -f command extra precision for pos. upd.8.9.14 Dn -p command extra precision for pos. upd.8.9.17 Dn -tb command added give support forbinary user strings8.14 GPS command added8.20.4 Log -f command extended with new options8.23.5 and8.11.3The option retxfail description has been upd.8.23.7 Pg -fe command: An unused reserved fieldhas replaced option remote. A New extended position precision field desc.D New data logging fields described8.28.30 Environment variable PRNFILTER added5.3 , C.5 Added zone group/group list selection poll8.25 Added Route command8.9.8 / 8.9.9 A.3Message data reportingTable 9.15 Configuration poll messages. © Thrane & Thrane A/S This Document and any other appended documents and drawings are of © copyright toThrane & Thrane A/S. It contains proprietary information which is disclosed forinformation purposes only. The contents of this document shall not in whole or in part beused for any other purpose; be disclosed to any member of the recipients organisation nothaving a need to know such information or to any third party, individual, organisation orGovernment; be stored in any retrieval system or be produced or transmitted in any formby photocopying or any optical, mechanical or other means without prior permission of Thrane & Thrane A/S. 3 TT-3026L/M/S/D/LM easyTrack Transceiver, Software Interface Reference ManualTT-3000SSA Ship Security Alert System andTT-3000E mini-C GMDSS System T ABLE OF C ONTENTS Table of Contents....................................................................4 List of Figures.......................................................................12 List of Tables........................................................................13 1 Introduction.....................................................................14 1.1 Applicability...................................................................................................14 1.2 Related Documents and References................................................................14 1.3 Abbreviations.................................................................................................15 1.4 The Interface..................................................................................................15 1.5 Changes From TT-302x C-Transceiver............................................................16 1.5.1 Environment Variables............................................................................16 1.6 The CapLib Software Package........................................................................16 2 General Transceiver Properties..........................................17 2.1 Automatic Operations.....................................................................................17 2.1.1 Power On Operation................................................................................17 2.1.2 Automatic Ocean Region Shift..................................................................17 2.1.3 Automatic Login.......................................................................................18 2.2 Authority Levels..............................................................................................18 2.3 File System.....................................................................................................19 2.3.1 File Priorities...........................................................................................20 2.3.2 File Commands........................................................................................20 2.4 Sleep Mode (Power Events)............................................................................20 2.4.1 Sleep Mode Disabled...............................................................................20 2.4.2 Sleep Mode Enabled................................................................................21 2.5 I/O Interface...................................................................................................21 2.5.1 Input Pins.................................................................................................22 2.5.2 Tachograph Interface Pin.........................................................................22 2.5.3 Output Pins..............................................................................................22 2.6 GPS unit..........................................................................................................23 2.6.1 SBAS........................................................................................................23 3 Messaging.......................................................................25 3.1 Overview........................................................................................................25 3.2 File Format.....................................................................................................25 3.2.1 Telex Address.........................................................................................25 3.2.2 Public Switched Telephone Network (PSTN) Address.............................25 3.2.3 Public Switched Data Network (PSDN ) x.25 address...............................26 3.2.4 Closed Data Network ID (DNID) Address.................................................26 3.2.5 Special Access Code (SAC) Address.......................................................26 3.2.6 Address Prefix.........................................................................................26 3.3 Message Alphabets........................................................................................26 3.4 Inmarsat Network Destination Codes..............................................................27 3.5 Examples........................................................................................................27 3.6 DNID Download Confirmation.........................................................................28 4
